The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install and/or modify copper cabling
|
|
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied Completed |
Evidence:
|
Hazards are identified, risks are assessed and control measures are implemented |
|
Completed |
Evidence:
|
Installation or modification of wiring is coordinated after consultation with relevant person/s affected by the work |
|
Completed |
Evidence:
|
Nature and location of work is obtained from relevant person/s and/or documentation, diagrams, cable layout drawings and cable schedules to determine the scope and details of work to be undertaken |
|
Completed |
Evidence:
|
Cable routes are planned in accordance with relevant regulations, constraints of the building structure, fire walls, cultural/heritage requirements and regulations |
|
Completed |
Evidence:
|
Advice is sought from relevant person/s to ensure work is coordinated effectively with others |
|
Completed |
Evidence:
|
Material required for the installation work is determined and obtained in accordance with workplace procedures and checked against job requirements |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required for the installation are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Preparatory work is checked to ensure compliance with regulations, workplace procedures, safety and job requirements |
|
Completed |
Evidence:
|
Install or modify copper cables
|
|
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed Completed |
Evidence:
|
Cables are installed or modified with sufficient excess to affect terminations in accordance with manufacturer specifications, technical standards and job requirements |
|
Completed |
Evidence:
|
Cable installation/modification is carried out without waste of materials or damage to apparatus, circuits or the surrounding environment and using sustainable energy practices |
|
Completed |
Evidence:
|
Terminate copper cables
|
|
WHS/OHS risk control measures and procedures for work completion are followed Completed |
Evidence:
|
Cable termination work area is cleaned and safety measures implemented |
|
Completed |
Evidence:
|
Cables are prepared for termination in accordance with manufacturer specifications, technical standards and workplace procedures |
|
Completed |
Evidence:
|
Surge suppression devices are fitted to cables with metallic components in accordance with manufacturer specifications, technical industry standards and workplace procedures |
|
Completed |
Evidence:
|
Cable shields are earthed in accordance with manufacturer specifications, technical standards and workplace procedures |
|
Completed |
Evidence:
|
Twist ratio of generic, structured metallic cables is maintained in accordance with manufacturer specifications and technical standards |
|
Completed |
Evidence:
|
Twisted pair cables are terminated in accordance with manufacturer specifications, technical standards and workplace procedures |
|
Completed |
Evidence:
|
Cable performance tests are conducted accurately and results documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Cause of defects indicated by inspection and test results are identified and rectified in accordance with manufacturer specifications, technical industry standards and workplace procedures |
|
Completed |
Evidence:
|
Regular quality checks of the installed wiring are undertaken in accordance with workplace procedures |
|
Completed |
Evidence:
|
Cable terminations are carried out without waste of materials, damage to apparatus, circuits or the surrounding environment and using sustainable energy practices |
|
Completed |
Evidence:
|
Verify and document copper cabling installation and performance
|
|
WHS/OHS risk control measures and workplace procedures for work completion are followed Completed |
Evidence:
|
Final checks are made to installed cabling to ensure it conforms to performance requirements and regulations |
|
Completed |
Evidence:
|
Telecommunications cabling advice (TCA) forms are completed in accordance with workplace procedures and issued to relevant person/s |
|
Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|