NTISthis.com

Evidence Guide: UEEDV0014 - Test, report and rectify faults in data and voice installations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEDV0014 - Test, report and rectify faults in data and voice installations

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to test, report and rectify faults

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing is prepared in consultation with others affected by work and sequenced in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Scope of the work is determined from documentation and/or discussions with relevant person/s to establish the work to be undertaken

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Advice is sought from relevant person/s to ensure work is coordinated effectively with others

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material needed for testing, reporting and rectifying work is obtained in accordance with workplace procedures and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred in accordance with job requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test and rectify faults

  1. WHS/OHS risk control measures and procedures for carrying out the work are followed
WHS/OHS risk control measures and procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tests are carried out in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tests are prepared and conducted in accordance with test equipment operating instructions and job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cable performance tests are conducted and results documented in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Causes of defects and/or faults indicated by test results are identified and rectified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods for dealing with unplanned situations are discussed with relevant person/s for approval and documented in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are dealt with safely and with the approval of relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quality checks of the installed equipment are undertaken in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing and rectifying faults is carried out without waste of materials or damage to equipment, circuits, surrounding environment or services using sustainable energy principles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Document and verify installation performance

  1. WHS/OHS work completion risk control measures and procedures are followed
WHS/OHS work completion risk control measures and procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service reports are completed as required in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation certifying system performance is issued to relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (WHS/OHS) requirements, including using risk control measures

carrying out work without waste of materials or damage to equipment, circuits, surrounding environment or services using sustainable energy principles

completing documentation

dealing with unplanned situations

identifying defects/faults from test results

interpreting test results

obtaining and checking tools, equipment and testing devices for correct operation and safety

preparing and conducting tests of faults

preparing test reports

rectifying faults

undertaking quality checks in accordance with workplace procedures

verifying installation performance.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

causes of non-compliant test results

networking fundamentals

optical time domain reflectometer (OTDR) operating principles, applications and calibration procedures

performance of copper cable measuring devices and techniques

performance of optical fibre measuring devices and techniques

performance parameters associated with copper cables, coaxial cables and optical cables

recording, reporting and maintaining test results

relevant industry standards

relevant manufacturer specifications and operating instructions

relevant job safety assessments or risk mitigation processes

relevant tools, equipment and testing devices

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace quality, policies and procedures

problem-solving techniques

test results for compliance with required regulation, standards and/or codes for structured copper cables, coaxial and optical fibre cables

testing and validation of a customer premises cabling installation.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Testing, reporting and rectifying faults in voice and data installations must include at least the following:

two different items of customer premises equipment

a local area network (LAN)