The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to test, report and rectify faults
|
|
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied Completed |
Evidence:
|
Testing is prepared in consultation with others affected by work and sequenced in accordance with workplace procedures |
|
Completed |
Evidence:
|
Scope of the work is determined from documentation and/or discussions with relevant person/s to establish the work to be undertaken |
|
Completed |
Evidence:
|
Advice is sought from relevant person/s to ensure work is coordinated effectively with others |
|
Completed |
Evidence:
|
Material needed for testing, reporting and rectifying work is obtained in accordance with workplace procedures and job requirements |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Preparatory work is checked to ensure no damage has occurred in accordance with job requirements and workplace procedures |
|
Completed |
Evidence:
|
Test and rectify faults
|
|
WHS/OHS risk control measures and procedures for carrying out the work are followed Completed |
Evidence:
|
Tests are carried out in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Tests are prepared and conducted in accordance with test equipment operating instructions and job requirements |
|
Completed |
Evidence:
|
Cable performance tests are conducted and results documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Causes of defects and/or faults indicated by test results are identified and rectified in accordance with workplace procedures |
|
Completed |
Evidence:
|
Methods for dealing with unplanned situations are discussed with relevant person/s for approval and documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Unplanned situations are dealt with safely and with the approval of relevant person/s |
|
Completed |
Evidence:
|
Quality checks of the installed equipment are undertaken in accordance with workplace procedures |
|
Completed |
Evidence:
|
Testing and rectifying faults is carried out without waste of materials or damage to equipment, circuits, surrounding environment or services using sustainable energy principles |
|
Completed |
Evidence:
|
Document and verify installation performance
|
|
WHS/OHS work completion risk control measures and procedures are followed Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Service reports are completed as required in accordance with workplace procedures |
|
Completed |
Evidence:
|
Documentation certifying system performance is issued to relevant person/s |
|
Completed |
Evidence:
|