NTISthis.com

Evidence Guide: UEEEC0005 - Assess electronic apparatus compliance

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEEC0005 - Assess electronic apparatus compliance

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to evaluate electronic apparatus compliance

  1. WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied
WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified, WHS/OHS risks are assessed, and control measures and workplace procedures are implemented in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Examination and testing areas are checked for safety hazards and risk control measures are implemented in accordance with workplace safety policy and procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant documentation is obtained and read to determine the certification/approval specifications for which the apparatus/equipment is to be assessed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Advice is sought from the relevant supervisor to ensure work is coordinated effectively with others

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, testing devices and materials needed to carry out work are obtained and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Evaluate electronic apparatus compliance

  1. WHS/OHS risk control measures and workplace procedures for carrying out evaluation work are followed
WHS/OHS risk control measures and workplace procedures for carrying out evaluation work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to inspect, test or measure live work is determined in accordance with WHS/OHS requirements and workplace safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operating requirements of the electronic apparatus are identified and applied to the assessment process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apparatus examination, inspection and tests are set up in accordance with certification/approval specifications, test methods and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apparatus examination, inspection and tests are carried out methodically with results and comments systematically documented in accordance with certification/approval specification requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are dealt with safely and with the approval of an authorised person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessment is carried out without unnecessary damage to apparatus, circuits, the surrounding environment or services using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work and document evaluation results

  1. WHS/OHS work completion risk control measures and procedures are followed
WHS/OHS work completion risk control measures and procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Examination, inspection and test results are evaluated and non-compliance issues identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Examination, inspection, test results and comments on non-compliance issues are documented and reported to appropriate person/s in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

implementing workplace procedures and practices

using risk control measures

applying sustainable energy principles and practices

identifying electronic apparatus compliance certification/approval specifications

interpreting compliance documents

setting up and conducting appropriate examinations, inspections and tests

evaluating electronic apparatus compliance

identifying non-compliance defects

reporting examination and test results and non-compliance issues clearly and accurately

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

completing apparatus assessment and documenting results

preparing to evaluate electronic apparatus certification/approval specifications compliance.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

compliance certification, including:

the purposes of certification of equipment

the parties involved in the assessment/testing and certification of equipment

the scheme for recognition of assessment/testing and certification

compliance testing and assessment of electronic apparatus equipment, including:

types of assessment, inspection and tests

test set-ups and workplace procedures

recording and reporting requirements of conformity assessment

preparation required to assess equipment for compliance with industry standards, including:

documentation required prior to conducting conformity assessment

tests necessary to establish that an item of equipment conforms with relevant industry standards

relevant compliance certification/approval specifications

relevant job safety assessments or risk mitigation processes, including:

safe working practices

relevant manufacturer specifications

relevant technical industry standards, regulations, codes of practice for electronic apparatus and WHS/OHS legislated requirements

relevant workplace documentation, including:

as marketed technical performance

industry technical standards

product quality endorsement standards

safety requirements

relevant workplace policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Assessing electronic apparatus compliance must include at least two different electronic apparatus of the following:

audio amplifiers

radio and televisions receivers

video displays

audio and video recording/replay devices

two-way radios

cell phones

instrumentation devices

control devices