NTISthis.com

Evidence Guide: UEEEC0024 - Diagnose and rectify faults in electronic display circuits

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEEC0024 - Diagnose and rectify faults in electronic display circuits

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to diagnose and rectify electronic display circuit faults

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and workplace procedures are followed in preparation for the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety hazards which have not previously been identified are risk assessed, documented and risk control measures devised and implemented in consultation with appropriate person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Extent of faults is determined from reports, documentation and discussions with appropriate person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed to diagnose faults are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnose and rectify electronic display circuit faults

  1. WHS/OHS risk control measures and workplace procedures for carrying out electronic display circuit work are followed
WHS/OHS risk control measures and workplace procedures for carrying out electronic display circuit work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to test and measure live work is determined in accordance with WHS/OHS requirements and, as required, conducted in accordance with workplace safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Logical diagnostic methods are applied to diagnose display circuits faults, employing measurements of circuit operating parameters referenced to display operating specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Suspected fault scenarios are tested as being the source of display circuit problems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faults in the electronic components of the display circuits are rectified to display circuits operation and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits are tested to verify that the display operates as intended in accordance with industry standards and to specified requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and consistent with job specifications and requirements in a manner that minimises risk to personnel and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnosis and rectification activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete and report fault diagnosis and rectification activities

  1. WHS/OHS work completion risk control measures and workplace procedures are followed
WHS/OHS work completion risk control measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is made safe in accordance with workplace safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rectification of faults is documented in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is notified in accordance with workplace procedures that display circuit faults have been rectified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

applying logical diagnostic methods

using fault scenarios to test the source of circuit faults

identifying the cause faults using logical diagnostic methods

rectifying faults effectively

verifying that the display operates correctly

documenting fault rectification

dealing with unplanned events

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, workplace procedures and practices, including using risk control measures

applying sustainable energy principles and practices

connecting test/measuring devices into a circuit in accordance with industry standards.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

electronic displays faults, applying safe working practices and relevant standards, codes and regulations, including:

cathode ray tube displays encompassing:

operation and characteristics of various types of cathode-ray tubes, including delta, in-line and precision in-line

voltages, statics and x-rays around cathode ray tubes

set-up and adjustment techniques

rear and front projection television systems

typical faults

plasma displays and their circuit control operation encompassing:

advantages of flat panel displays (over conventional cathode ray tubes and raster geometry)

theory of plasma gas discharge and phosphor excitation

scanning techniques (column/row addressing)

luminance/colour aspects (the need to re-address pixels to control light output)

gamma correction considerations (reversal of the gamma correction that is carried out at the television studio to compensate for the non-linearity of light output of a conventional cathode ray tube

plasma flat panel construction (and handling)

liquid crystal displays and the control circuit operation encompassing:

principles of transmissive liquid-crystal display (LCD) (as opposed to reflective types)

light polarisation (polarisation twisting characteristics of liquid crystal and the need for polarisation filters in display panel)

voltage/current requirements and need for electric field

fluorescent back light (need for high frequency operation and power requirements)

scanning techniques (colour/row addressing and thin film transistors)

light attenuation (caused by the many layers/filters the back light has to pass through)

construction and handling

display circuit diagnostics encompassing:

sub-system components (i.e. functional blocks) and their operating parameters

factors effecting system performance

typical faults, their symptoms and cause

fault diagnosis procedures and testing

sub-system adjustments

advance electronic measuring instruments encompassing:

test/measuring devices and their application: frequency counters and synthesisers, spectrum analysers, noise and distortion meters, and radio frequency (RF) communications service monitor

connection of test/measuring devices into a circuit encompassing:

safety procedures

loading and matching

storage and delay

circuit arrangement of test/measuring devices

taking and interpreting readings

notion of decibels, including dBm, dBr, dBu and dBo

WHS/OHS enterprise responsibilities encompassing:

provisions of relevant WHS/OHS legislation

principles and practice of effective WHS/OHS management

management arrangements relating to regulatory compliance

enterprise hazards and risks, control measures and relevant expertise required

characteristics and composition of workforce and their impact on WHS/OHS management

relevance of enterprise management systems to WHS/OHS management

analysis of working environment and design of appropriate WHS/OHS management systems

analysis of relevant data and evaluation of WHS/OHS system effectiveness

assess resources to establish and maintain WHS/OHS management systems

relevant manufacturer specifications

relevant workplace documentation

relevant workplace policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Diagnosing and rectifying faults in electronic display circuits must include at least the following:

two circuit faults in two different types of displays