The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to diagnose and rectify electronic display circuit faults
|
|
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied Completed |
Evidence:
|
WHS/OHS risk control measures and workplace procedures are followed in preparation for the work |
|
Completed |
Evidence:
|
Safety hazards which have not previously been identified are risk assessed, documented and risk control measures devised and implemented in consultation with appropriate person/s |
|
Completed |
Evidence:
|
Extent of faults is determined from reports, documentation and discussions with appropriate person/s |
|
Completed |
Evidence:
|
Appropriate person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite |
|
Completed |
Evidence:
|
Tools, equipment and testing devices needed to diagnose faults are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Diagnose and rectify electronic display circuit faults
|
|
WHS/OHS risk control measures and workplace procedures for carrying out electronic display circuit work are followed Completed |
Evidence:
|
Need to test and measure live work is determined in accordance with WHS/OHS requirements and, as required, conducted in accordance with workplace safety procedures |
|
Completed |
Evidence:
|
Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Logical diagnostic methods are applied to diagnose display circuits faults, employing measurements of circuit operating parameters referenced to display operating specifications |
|
Completed |
Evidence:
|
Suspected fault scenarios are tested as being the source of display circuit problems |
|
Completed |
Evidence:
|
Faults in the electronic components of the display circuits are rectified to display circuits operation and industry standards |
|
Completed |
Evidence:
|
Circuits are tested to verify that the display operates as intended in accordance with industry standards and to specified requirements |
|
Completed |
Evidence:
|
Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and consistent with job specifications and requirements in a manner that minimises risk to personnel and equipment |
|
Completed |
Evidence:
|
Diagnosis and rectification activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices |
|
Completed |
Evidence:
|
Complete and report fault diagnosis and rectification activities
|
|
WHS/OHS work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Worksite is made safe in accordance with workplace safety procedures |
|
Completed |
Evidence:
|
Rectification of faults is documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Appropriate person/s is notified in accordance with workplace procedures that display circuit faults have been rectified |
|
Completed |
Evidence:
|