The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install and set up wired and wireless security system
|
|
WHS/OHS requirements and workplace procedures for a given work area are identified and applied Completed |
Evidence:
|
WHS/OHS risk control measures are followed in preparation for security system work |
|
Completed |
Evidence:
|
Safety hazards not previously identified are risk assessed, reported and advice on risk control measures sought from work supervisor |
|
Completed |
Evidence:
|
Nature and apparatus location of the security system work is determined from work supervisor or other appropriate person/s and drawings related to cable layouts and locations to establish the scope of work to be undertaken are identified |
|
Completed |
Evidence:
|
Advice is sought from the work supervisor or other appropriate person/s to ensure the security system work is coordinated effectively with others |
|
Completed |
Evidence:
|
Sources of materials required for the security system work are determined in accordance with workplace routines |
|
Completed |
Evidence:
|
Tools, equipment and testing devices needed to carry out the security system work are obtained and checked for correct operation and safety |
|
Completed |
Evidence:
|
Install wired and wireless security system
|
|
WHS/OHS risk control measures for carrying out security system work are followed Completed |
Evidence:
|
Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Security controllers and devices are located for optimum performance within limitations imposed by customers, industry standards and regulations |
|
Completed |
Evidence:
|
Accessories and devices are installed, straight and square, in the required locations and within acceptable tolerances |
|
Completed |
Evidence:
|
Cables and conductors are terminated at accessories and devices in accordance with manufacturer specifications, industry standards and regulatory requirements |
|
Completed |
Evidence:
|
Methods for dealing with unplanned situations are discussed with appropriate person/s and documented |
|
Completed |
Evidence:
|
Unplanned situations are dealt with in accordance with workplace procedures safely and with the approval of authorised person/s in a manner that minimises risk to personnel and equipment |
|
Completed |
Evidence:
|
Security installation is carried out efficiently without waste of materials or damage to apparatus, circuits or the surrounding environment using sustainable energy practices |
|
Completed |
Evidence:
|
Set up wired and wireless security system and document work activity
|
|
WHS/OHS work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Security system installation is documented in accordance with regulatory requirement and workplace procedures |
|
Completed |
Evidence:
|