NTISthis.com

Evidence Guide: UEEEC0044 - Modify - redesign electronics and communications systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEEC0044 - Modify - redesign electronics and communications systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to modify/redesign electronics and communications system

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and workplace procedures in preparation for work activity are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety hazards that have not previously been identified are noted on job safety assessment, assessed and risk control measures implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is consulted to ensure the work is coordinated effectively with others involved on the worksite

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System operating parameters are identified by reviewing system specifications and component technical data

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Limitations, use and operation of the electronics and communication system to be modified are determined from original specifications, manufacturer data and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Extent of modification is determined from measurements, tests, inspections, system limitations and other relevant requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specifications and instructions for the modifications are documented in accordance with job requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment, applications and devices needed for the electronics work are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no unnecessary damage has occurred and complies with job requirements and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Generate modification and redesign of electronics and communications system

  1. WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Alternative modification is considered and discussed with appropriate person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety, functionality and economic considerations are incorporated in the proposed modification design

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proposed communications system modification complies with job requirements and specifications for system design alteration are documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Changes in the use and operation of the communications system as a consequence of the proposed modification are included in the design documentation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and job specifications or requirements in a manner that minimises risk to personnel and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Modification and redesign are carried out efficiently without unnecessary waste of materials or damage to electronics apparatus, the surrounding environment or services using sustainable energy principles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete design and report modification activities

  1. WHS/OHS risk control work completion measures and workplace procedures are followed
WHS/OHS risk control work completion measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proposed modification is checked in accordance with workplace procedures for compliance with relevant job requirements and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proposed modification is submitted for appropriate organisational approval and, as required, statutory or regulatory approval

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Approved copies of the communications system modification and redesign documents are issued and copies retained, documented and stored in records in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

developing outlines of alternative redesigns

developing the modified/redesigned system within the safety and functional requirements and budget limitations

documenting and presenting modifications/redesigns effectively

successfully negotiating system alteration requests

obtaining approval for final modified/redesigned system

dealing with unplanned events

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, workplace procedures and practices, including using of risk control measures

applying sustainable energy principles and practices.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

electronic and communications engineering design processes

functional and non-functional requirements of a customer encompassing:

scope of the project

non-functional requirements, including:

economics (time and cost), including total life cycle costs

design

implementation (construction)

maintenance (operation)

decommissioning (recycling)

aesthetics (quality)

design objectives (specifications)

specifications by defining the problem and producing a solution to satisfy the customer

creation of the design plan through solution synthesis by selecting or creating the solution

analysis

optimisation of the proposed solution

validations of the resulting design against the customer's needs

implementation of the selected design

project to be carried out in accordance with current WHS/OHS procedures

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications

relevant workplace policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Modifying/redesigning electronics and communications systems must include at least the following:

two different and representative types of electronics and communications systems