NTISthis.com

Evidence Guide: UEEEL0072 - Set up and place LV electrical apparatus and associated circuits into service

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEEL0072 - Set up and place LV electrical apparatus and associated circuits into service

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to set up electrical apparatus and associated controls

  1. WHS/OHS requirements and workplace procedures for a given work area are identified, obtained and applied
WHS/OHS requirements and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and procedures in preparation for the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS hazards not previously identified are noted on job safety assessment, risks assessed and risk control measures implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is appropriately sequenced in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is consulted to ensure the work is coordinated effectively with others

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Location of electrical apparatus and controls is determined from site inspection and/or job specifications and diagrams

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control settings and operating parameters are determined from job specifications and in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed to commission the system are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Checks are undertaken to ensure all components are in place and secure in accordance with workplace procedures and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to inspect, test and measure live electrical work and operating system is determined in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up electrical apparatus and associated controls

  1. WHS/OHS risk control measures and workplace procedures for carrying out work are followed
WHS/OHS risk control measures and workplace procedures for carrying out work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Electrical apparatus and associated controls are adjusted to the required settings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing/measuring devices are used to observe the operation of electrical apparatus and adjustments of controls, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods for dealing with unplanned events are dealt with in accordance with workplace procedures and safe work practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set-up is conducted efficiently without waste of materials, services, damage to apparatus or the environment using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete documentation

  1. WHS/OHS work completion risk control measures and workplace procedures are followed
WHS/OHS work completion risk control measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results of work and final operating parameters are documented and appropriate person/s notified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

selecting appropriate testing/measuring devices

making initial adjustments of apparatus and controls correctly

finely adjusting apparatus and controls based of measured observations

documenting final operating parameters accurately

dealing with unplanned events

applying relevant industry standards

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures

applying sustainable energy practices

following job specifications, workplace procedures and instructions

setting up electrical apparatus and associated controls, including:

locating electrical apparatus and controls.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

commissioning processes and procedures and setting up and placing electrical apparatus and associated circuits into service, including:

commissioning processes and procedures encompassing:

purpose of commissioning

commissioning planning and documentation

procedures for configuring, calibrating and tuning systems during commissioning systems

procedures for validating system performs to specification

procedures followed to commission instrument systems

purpose and importance of documentation

problem-solving techniques

relevant industry standards

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications and operating instructions

relevant sustainable energy practices

relevant tool, equipment and testing/measuring devices

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies, procedures and job specifications.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.