NTISthis.com

Evidence Guide: UEEEL0073 - Verify compliance and functionality of special LV electrical installations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEEL0073 - Verify compliance and functionality of special LV electrical installations

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect and test an electrical installation

  1. Work health and safety (WHS)/occupational health and safety (OHS) measures for the site are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) measures for the site are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and procedures in preparation for the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS hazards not previously identified are noted, risks assessed and risk control measures implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation documentation and relevant industry standard are reviewed and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is consulted to ensure the work is coordinated effectively with others

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed to verify compliance are obtained in accordance with workplace procedures and checked for operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Visually inspect the installation

  1. WHS/OHS risk control measures and procedures for carrying out the work are followed
WHS/OHS risk control measures and procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installed wiring is checked for suitability for the environments and protected from damage and overheating

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cable conductor sizes acquired are inspected to meet current-carrying capacity requirements, voltage-drop and fault-loop impedance limitations in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection protection methods and devices are validated to meet coordination requirements for overload and short circuit protection in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Switchgear and control gear are inspected, validated and appropriately rated to meet functional requirements in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Electrical equipment is checked for compliance with safety requirements in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Earthing system components are checked, located and conductors correctly sized in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Markings on switchboards are checked for accuracy and clarity in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct safety testing

  1. WHS/OHS risk control measures and procedures for carrying out the work are followed
WHS/OHS risk control measures and procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to test and measure live electrical work is conducted in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mandatory tests are conducted to verify earthing conductor resistance is sufficiently low; insulation resistance is sufficiently high; polarities are correct; circuit connections are correct; and tests are in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspection and testing are conducted to verify fault-loop impedance is sufficiently low and residual current device (RCD) operates as intended in accordance with job requirements and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report inspection and test findings

  1. WHS/OHS risk control work completion measures and workplace procedures are followed
WHS/OHS risk control work completion measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Non-compliance defects are identified and reported in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recommendations for rectifying defects are made in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mandatory documentation is completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

selecting correct tools and testing equipment

identifying visual non-compliance defects

using effective methods for conducting mandatory and optional tests

identifying non-compliance from test results

identifying causes of non-compliance

completing mandatory reporting

dealing with unplanned events

applying relevant work health and safety (WHS)/occupational health and safety (OHS requirements, including using risk control measures

preparing, inspecting and testing an electrical installation

reporting inspection and test findings

reviewing relevant industry documentation.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

electrical installations, testing, compliance and functionality verification of special electrical installations, including:

technical standards, regulations and codes for special electrical installations encompassing:

additional requirements for special installations

caravan parks

construction and demolition sites

marinas

medical treatment areas

moveable premises

high voltage (HV) installation in consumer’s premises

mandatory and optional testing and verification requirements applicable to special installations encompassing:

testing techniques

features of special installations that can be visually inspected

caravan parks

construction and demolition sites

marinas

medical treatment areas

moveable premises

HV installation in consumer’s premises

relevant industry standards

relevant job safety assessments or risk mitigation processes

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Verifying compliance and functionality must include at least two types of installations from the following:

caravan parks

construction and demolition sites

marinas

medical treatment areas

moveable premises