NTISthis.com

Evidence Guide: UEEIC0006 - Design and configure Human-Machine Interface (HMI) networks

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEIC0006 - Design and configure Human-Machine Interface (HMI) networks

What evidence can you provide to prove your understanding of each of the following citeria?

Select and design HMIcontrol system network

  1. Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Scope of HMI control system network is determined from network specifications/design brief and in consultation with relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Activities are planned to meet scheduled specifications/design brief timelines in consultation with person/s involved in the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Management tools and software are selected based on specified requirements and performance standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Strategies are implemented to ensure network development is carried out efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install, configure and manage HMIcontrol system network

  1. WHS/OHS risk control measures and workplace procedures for carrying out work are followed
WHS/OHS risk control measures and workplace procedures for carrying out work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Network infrastructure components are installed and configured in accordance with industry standards and variants as specified for the network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Structural components of directory services are installed and configured in accordance with industry standards and variants as specified for the network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Management components of network control system are configured in accordance with industry standards and requirements specified for the network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Security components of network control system are created in accordance with industry standards and requirements specified for the network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Network malfunctions/faults are identified and rectified using logical problem-solving techniques of complex network control system infrastructure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Network is monitored and solutions are developed to optimise network performance and reliability in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Security events are analysed and actions taken in accordance with workplace policies and protocols

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods for dealing with unplanned issues/problems are analysed to provide the most effective solutions in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Quality of work is monitored in accordance with performance agreement/specifications and/or workplace procedures or industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report HMInetwork administration activities

  1. Written justification is produced for HMI network services development activities and relevant person/s notified in accordance with workplace procedures
Written justification is produced for HMI network services development activities and relevant person/s notified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Network service development records are maintained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying problem-solving techniques

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

implementing workplace procedures and practices

using of risk control measures

applying sustainable energy principles and practices

configuring management components of human-machine interface (HMI) network services

creating security components of HMI network services

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

developing solutions to optimise network performance

documenting HMI network services development activities

establishing network services to be developed

identifying and rectifying HMI network malfunctions/faults

installing and configuring network infrastructure components

installing and configuring structural components of directory services

installing, configuring and managing HMI control system networks

preparing to design control system networks

reporting network administration activities in accordance with workplace procedures.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

problem-solving techniques and troubleshooting remote access including remote access policy, configuration of remote access profile, virtual private network (VPN), multi-link connection, routing and remote access for dynamic host configuration protocol (DHCP)

control system networks interface

DHCP

HMI control system networks

installation, configuring and troubleshooting of internet protocol (IP) routing protocols including updating routing tables and implementing demand-dial routing

internet naming services in a network

IP routing, including border routing, internal routing and IP routing protocols

network address translation (NAT)

network infrastructure

network protocols

open and common proprietary control system networks models (layers) and protocols, including CANopen, ControlNet, devicenet, ethernet, foundation fieldbus, interbus, modbus and pofibus

purpose and application of HMI control system networks systems

relevant certificate services

relevant domain name service (DNS)

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures

remote access security including authentication protocols, encryption protocols and access policy.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Designing and configuring HMI networks must include at least the following:

controllers and devices installation and configuration

development activities documentation

malfunctions and faults diagnostics

operation of distributive and central control system networks monitoring and maintenance

safe working practices

system operations monitoring