The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to tune control loop with advanced functions
|
|
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied Completed |
Evidence:
|
WHS/OHS risk control measures and workplace procedures are followed in preparation for the work |
|
Completed |
Evidence:
|
Safety hazards that have not previously been identified are noted and risk control measures implemented |
|
Completed |
Evidence:
|
Relevant person/s is consulted to ensure work is coordinated effectively with others involved on the worksite |
|
Completed |
Evidence:
|
Advanced control loop parameters are identified by reviewing process specifications and equipment instructions |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Preparatory work is checked to ensure no damage has occurred and work is in accordance with relevant industry standards |
|
Completed |
Evidence:
|
Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Circuits/machines/plant are inspected, tested and isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Tune control loop for advanced functions
|
|
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed Completed |
Evidence:
|
Testing/measuring devices are connected and set up in accordance with relevant industry standards and control system for advanced functions |
|
Completed |
Evidence:
|
Control set-point is determined and control loop adjusted in accordance with relevant industry standards and process specifications |
|
Completed |
Evidence:
|
Process is observed and decisions made in consultation with process operation personnel to readjust control loop settings to ensure process demand and output quality are met |
|
Completed |
Evidence:
|
Process control loops are readjusted, as required, and checked |
|
Completed |
Evidence:
|
Methods for dealing with unexpected situations are discussed with relevant person/s and documented |
|
Completed |
Evidence:
|
Unplanned situations are dealt with safely and with the approval of relevant person/s in accordance with workplace procedures |
|
Completed |
Evidence:
|
Quality inspection is conducted of process output to ensure control loop is tuned in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tuning is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy principles |
|
Completed |
Evidence:
|
Complete and report control loop tuning activities
|
|
WHS/OHS risk control work completion measures and workplace procedures are followed Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Control loop settings are documented and relevant person/s notified in accordance with workplace procedures |
|
Completed |
Evidence:
|