NTISthis.com

Evidence Guide: UEEIC0031 - Set up and configure human-machine interface (HMI) and industrial networks

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEIC0031 - Set up and configure human-machine interface (HMI) and industrial networks

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to setup and configure HMI and industrial networks

  1. Scope of the control system is determined from job specifications
Scope of the control system is determined from job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for the control system are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control apparatus and interconnecting components required for control system are arranged and determined from job specifications and in accordance with process control systems and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Setup and configure HMI and industrial networks

  1. Manufacturer specifications and limitations of relevant control apparatus is sought and comparisons made with process parameters and control requirements in accordance with job specifications
Manufacturer specifications and limitations of relevant control apparatus is sought and comparisons made with process parameters and control requirements in accordance with job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control apparatus is selected in accordance with compatibility with process parameters, control requirements and relevant environmental conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specified apparatus ingress protection (IP) rating is sought from manufacturer specifications, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control valves are selected in accordance with percentage travel flow and loop-and-process characteristics, optimum size, range ability, ability to cope with process pressures and relevant environmental conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select interconnecting cabling and tubing/piping

  1. Control cabling and configuration are selected in accordance with relevant environmental conditions and interconnection requirements
Control cabling and configuration are selected in accordance with relevant environmental conditions and interconnection requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tubing/piping and accessories are sized to capacity and pressure requirements in accordance with job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Route lengths of cable and tubing/piping are determined from site drawings in accordance with job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process control system is arranged and specifications for all selected items are documented in accordance with workplace procedures and forwarded to relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including

using risk control measures

comparing process parameters and control requirements with the control apparatus

determining control apparatus and interconnecting components required for control system

determining the scope of the control system

documenting control system arrangement and specifications for items selected

preparing to set up and configure human-machine interface (HMI) and industrial networks

seeking specified apparatus ingress protection (IP) rating from manufacturer specifications

selecting control valve in accordance with workplace procedures and relevant industry standards

selecting interconnecting cabling and tubing/piping

setting up and configuring HMI and industrial networks.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

analogue and digital signals

distributive control principles (DCS)

purpose and application of control system networks

relevant apparatus IP rating

relevant HMI and industrial networks

relevant industry process control systems

relevant interconnecting cabling and tubing/piping

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications and operating instructions

relevant process parameters and control requirements

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace instructions, policies and procedures

telemetry components

telemetry installation

telemetry overview

telemetry systems.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Setting up and configuring HMI and industrial networks must include the following:

at least two process control systems with:

more than one input

more than one final control element