NTISthis.com

Evidence Guide: UEEIC0033 - Set up gas analysis measuring and control instruments

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEIC0033 - Set up gas analysis measuring and control instruments

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to arrange gas analysis measuring instruments

  1. Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and workplace procedures are followed in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety hazards that have not previously been identified are noted and risk control measures implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant person/s is consulted to ensure work is coordinated effectively with others involved on worksite

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measurement parameters are identified by reviewing process requirements and instrument manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred and work is in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrange gas analysis measuring instruments

  1. WHS/OHS risk control measures and workplace procedures for carrying out work are followed
WHS/OHS risk control measures and workplace procedures for carrying out work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Testing/measuring devices are connected and arranged in accordance with relevant industry standards and control system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Measuring instruments are arranged and adjusted in accordance with workplace procedures and instrument manufacturer instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods for dealing with unplanned situations are discussed with relevant person/s and documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are dealt with safely and with approval of a relevant person/s

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy principles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete and report set-up activities

  1. WHS/OHS risk control work completion measures and workplace procedures are followed
WHS/OHS risk control work completion measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustment settings are documented and relevant person/s notified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including

using risk control measures

arranging and adjusting measuring instruments in accordance with workplace procedures and instrument manufacturer instructions

arranging gas analysis measuring instruments

carrying out work efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy principles

checking preparatory work to ensure no damage to equipment

completing and reporting set-up activities

connecting and arranging testing/measuring devices

dealing with unplanned situation by discussing with relevant person/s and documenting

determining need to test and measure live work

documenting adjustment settings in accordance with workplace procedures

identifying measurement parameters

isolating circuits/machines/plant

obtaining tools, equipment and testing devices required for work

preparing to arrange gas analysis measuring instruments.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

principle of operation of various indicators connected in remote measurement loop

problem-solving techniques

relevant gas measuring and control instruments

relevant industry standards

relevant isolation procedures

relevant manufacturer specifications and operating instructions

relevant job safety assessments or risk mitigation processes

relevant tools, equipment and testing devices

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace instructions, policies and procedures

sustainable energy principles

types of recorder used in process measurement.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Setting up and adjusting measuring and control instruments must include at least two of the following:

gas analysis measuring instruments