The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to find and rectify faults
|
|
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and understood Completed |
Evidence:
|
WHS/OHS risk control measures and workplace procedures are followed in preparation for work |
|
Completed |
Evidence:
|
Scope of fault is obtained from documentation and/or from work supervisor to determine work |
|
Completed |
Evidence:
|
Advice is sought from work supervisor to ensure work is coordinated effectively with others |
|
Completed |
Evidence:
|
Sources of materials required for work are identified in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required to carry out work are obtained in accordance with workplace procedures and checked for correct operation and safety
|
|
WHS/OHS risk control measures and workplace procedures for carrying out work are followed Completed |
Evidence:
|
Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Apparatus is inspected and isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Fault finding of industrial processes, control apparatus and systems is conducted using measured and calculated values of system parameters in accordance with workplace procedures |
|
Completed |
Evidence:
|
Apparatus components are dismantled, as required, and parts stored to protect against loss or damage in accordance with workplace procedures |
|
Completed |
Evidence:
|
Faulty components are rechecked and fault status confirmed |
|
Completed |
Evidence:
|
Unplanned situations are dealt with safely and with the approval of relevant person/s in accordance with workplace procedures |
|
Completed |
Evidence:
|
Fault-finding activities are carried out without damage to apparatus circuits, the surrounding environment or services using sustainable energy principles
|
|
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed Completed |
Evidence:
|
Materials required to rectify faults are sourced and obtained in accordance with workplace procedures |
|
Completed |
Evidence:
|
Repairs are conducted without damage to relevant components or apparatus in accordance with workplace procedures and sustainable energy principles |
|
Completed |
Evidence:
|
Repairs are inspected and tested in accordance with workplace procedures and relevant industry standards |
|
Completed |
Evidence:
|
Apparatus is reassembled, inspected, tested and prepared for return to customer in accordance with workplace procedures and relevant industry standard |
|
Completed |
Evidence:
|
Complete and report fault-finding and rectification activities
|
|
WHS/OHS work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Work area is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion is documented and relevant person/s notified in accordance with workplace procedures |
|
Completed |
Evidence:
|