NTISthis.com

Evidence Guide: UEEIC0048 - Verify compliance and functionality of instrumentation and control installations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEEIC0048 - Verify compliance and functionality of instrumentation and control installations

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect and test instrumentation and control installation

  1. WHS/OHS measures for the site are identified, obtained and understood
WHS/OHS measures for the site are identified, obtained and understood

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS risk control measures and workplace procedures are followed in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety hazards not previously identified are noted and risk control measures implemented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Documentation of installation is reviewed and implemented in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant person/s is consulted to ensure work is coordinated effectively with others involved on worksite

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices are checked for correct operation and safety in accordance with workplace procedures and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred and work is in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Visually inspect instrumentation and control installation

  1. WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to visually inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Instrument cabling and tubing are checked for suitability of the environments to be installed and protected from damage in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Type, configuration/sizing of instrument cabling and tubing is confirmed for the installation in accordance with relevant industry standards and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Control apparatus and installation requirements are cited in accordance with WHS/OHS requirements and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Marking of control apparatus is checked for accuracy and clarity in accordance with relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct functional and safety testing

  1. WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process control apparatus is operated at low voltage (LV) arrangements to conduct and report on electrical safety tests in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Insulation and continuity tests are conducted on process control cabling operating at extra-low voltage (ELV) in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process control tubing/piping is pressure tested in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Functional inspections and tests are conducted on process control apparatus in accordance with workplace procedures and relevant industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Report instrumentation and control inspection and test findings

  1. WHS/OHS risk control work completion measures and workplace procedures are followed
WHS/OHS risk control work completion measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Non-compliance defects are identified and reported in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recommendations for rectifying defects are made in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Verification documentation is completed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including

using risk control measures

checking accuracy and clarity of control apparatus marking

checking and isolating circuits/machines/plant

checking for correct operation of tools, equipment and testing devices

checking instrument cabling and tubing for non-compliance defects

checking preparatory work to ensure no damage has occurred and work is in accordance with relevant industry standards

completing verification documentation

confirming instrument cabling and tubing, type and configuration/sizing for installation

identifying defects of non-compliance and recommending rectifying defects

identifying non-compliance results

preparing instrumentation and control installations

reviewing control apparatus and installation requirements

testing and measuring live circuits

using effective methods for conducting inspections and tests

visually inspecting instrumentation and control installation.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

problem-solving techniques

relevant circuits/machines/plant

relevant control installations to industry standards

relevant inspection and test methods

relevant inspection, test and measurement methods for live work

relevant instrument cabling and tubing for installation

relevant isolation procedures

relevant manufacturer specifications and operating instructions

relevant job safety assessments or risk mitigation processes

relevant tools, equipment and testing devices

relevant WHS/OHS legislated requirements

relevant workplace documentation, including

verification and compliance industry standards

relevant workplace instructions, policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Verifying compliance and functionality must include the following:

at least one electrical/electronic installation

at least one pneumatic process control installation comprising of:

a measuring transmitter

controller

final control element

indicator

cabling/tubing