The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to test, report and rectify faults.
|
|
OHS procedures for a given work area are identified, obtained and understood. Completed |
Evidence:
|
Health and safety risks are identified, and established risk control measures and procedures in preparation for the work are followed. Completed |
Evidence:
|
Safety hazards that have not previously been identified are noted, and established risk control measures are implemented. Completed |
Evidence:
|
Testing is prepared in consultation with others affected by the work and sequenced appropriately. Completed |
Evidence:
|
The nature and location of the work is determined from documentation or in discussion with appropriate person(s) to establish the scope of work to be undertaken. Completed |
Evidence:
|
Advice is sought from appropriate persons to ensure the work is coordinated effectively with others. Completed |
Evidence:
|
Material needed for the testing, reporting and rectifying work is obtained in accordance with established procedures and checked against job requirements. Completed |
Evidence:
|
Tools, equipment and testing devices needed to for the work are obtained in accordance with established procedures and checked for correct operation and safety. Completed |
Evidence:
|
Preparatory work is checked to ensure no damage has occurred and that it complies with requirements. Completed |
Evidence:
|
Test and rectify faults
|
|
OHS risk control measures and procedures for carrying out the work are followed. Completed |
Evidence:
|
Tests are carried out in strict accordance with OHS established safety procedures. Completed |
Evidence:
|
Tests are prepared and conducted in accordance with test equipment operating instructions and requirements. Completed |
Evidence:
|
Cable performance tests are conducted accurately and results documented in accordance with established procedures. Completed |
Evidence:
|
Causes of defects or faults indicated by test results are identified and rectified in accordance with established procedures. Completed |
Evidence:
|
Established methods for dealing with unexpected situations are discussed with appropriate person(s) and documented. Completed |
Evidence:
|
Unexpected situations are dealt with safely and with the approval of an authorised person. Completed |
Evidence:
|
Ongoing checks of the quality of installed equipment are undertaken in accordance with established procedures. Completed |
Evidence:
|
Testing and rectifying faults is carried out efficiently without waste of materials or damage to equipment, circuits, the surrounding environment or services and using sustainable energy principles. Completed |
Evidence:
|
Document and verify installation performance.
|
|
OHS work completion risk control measures and procedures are followed. Completed |
Evidence:
|
Work site is cleaned and made safe in accordance with established procedures. Completed |
Evidence:
|
Service reports are completed, when necessary in accordance with established procedures. Completed |
Evidence:
|
Documentation certifying system performance is issued to an appropriate person(s). Completed |
Evidence:
|