NTISthis.com

Evidence Guide: UEENEEG021B - Verify compliance and functionality of special electrical installations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEENEEG021B - Verify compliance and functionality of special electrical installations

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to inspect and test an electrical installation.

  1. OHS measures for the site are identified, obtained and understood.
  2. Established OHS risk control measures and procedures in preparation for the work are followed.
  3. Safety hazards, which have not previously been identified, are noted and established risk control measures are implemented.
  4. Documentation or deemed to comply standard on which installation is based is reviewed and understood.
  5. Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved on the work site.
  6. Tools, equipment and testing devices needed to verify compliance are obtained in accordance with established procedures and checked for correct operation and safety.
  7. Preparatory work is checked to ensure no damage has occurred and complies with requirements.
OHS measures for the site are identified, obtained and understood.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Established OHS risk control measures and procedures in preparation for the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safety hazards, which have not previously been identified, are noted and established risk control measures are implemented.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Documentation or deemed to comply standard on which installation is based is reviewed and understood.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved on the work site.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed to verify compliance are obtained in accordance with established procedures and checked for correct operation and safety.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred and complies with requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Visually inspect the installation.

  1. OHS risk control measures and procedures for carrying out the work are followed.
  2. The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
  3. Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
  4. Wiring is checked for suitability for the environments in which they are installed and suitably protected from damage or overheating.
  5. Cable conductor sizes are acquired as meeting current-carrying capacity requirements and voltage-drop and fault-loop impedance limitations.
  6. Protection methods and devices are validated as meeting co-ordination requirements for overload and short-circuit protection.
  7. Switchgear and control gear is validated as being appropriately rated and meeting functional requirements.
  8. Evidence that electrical equipment complies with safety requirements is cited.
  9. Earthing system components are checked that they are correctly located and conductors correctly sized.
  10. Marking on switchboards are checked for accuracy and clarity and comply with requirements.
OHS risk control measures and procedures for carrying out the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Wiring is checked for suitability for the environments in which they are installed and suitably protected from damage or overheating.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Cable conductor sizes are acquired as meeting current-carrying capacity requirements and voltage-drop and fault-loop impedance limitations.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Protection methods and devices are validated as meeting co-ordination requirements for overload and short-circuit protection.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Switchgear and control gear is validated as being appropriately rated and meeting functional requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Evidence that electrical equipment complies with safety requirements is cited.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Earthing system components are checked that they are correctly located and conductors correctly sized.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Marking on switchboards are checked for accuracy and clarity and comply with requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Conduct safety testing.

  1. OHS risk control measures and procedures for carrying out the work are followed.
  2. The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.
  3. Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
  4. Mandatory tests are conducted to verify that:
OHS risk control measures and procedures for carrying out the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Mandatory tests are conducted to verify that:

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Earthing conductor resistance is sufficiently low

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Insulation resistance is sufficiently high

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Polarities are correct

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuit connections are correct

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Other tests required by a Standard

  1. Testing is conducted to verify that:
Testing is conducted to verify that:

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Fault-loop impedance is sufficiently low

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Residual current devices operate as intended.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Report inspection and test findings.

  1. OHS risk control work completion measures and procedures are followed.
  2. Work site is cleaned and made safe in accordance with established procedures.
  3. Non-compliance defects are identified and reported in accordance with established procedures.
  4. Recommendations for rectifying defects are made in accordance with established procedures.
  5. Mandatory documentation is completed in accordance with established procedures.
OHS risk control work completion measures and procedures are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work site is cleaned and made safe in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Non-compliance defects are identified and reported in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Recommendations for rectifying defects are made in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Mandatory documentation is completed in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit . It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Verify compliance and functionality of special electrical installations as describe as described in 8) and including:

A

Selecting correct tools and testing equipment.

B

Identifying visual non-compliance defects.

C

Using effective methods for conducting mandatory and optional tests.

D

Identifying non-compliance from test results.

E

Identifying causes of non-compliance.

F

Completing mandatory reporting.

G

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be part of the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to verifying compliance and functionality of special electrical installations.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the industry to which this unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.

Required Skills and Knowledge

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and verifying compliance and functionality of special electrical installations.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.5.2.2

Technical standards, regulations and codes for special electrical installations

2.7.5.2

Electrical installations, testing and verification of special installations

Range Statement

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated by verifying compliance and functionality of at least two of the following types of installations

Caravan parks

Construction and demolition sites

HV installation in consumer's premises

Marinas

Medical treatment areas

Moveable premises

The electrical installations shall comprise consumer's mains, main earthing system and main switchboard and sub-mains, earthing system and distribution boards, final sub circuits and requirement particular to the installation type.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.