NTISthis.com

Evidence Guide: UEENEEG031B - Evaluate performance of electrical apparatus

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEENEEG031B - Evaluate performance of electrical apparatus

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to evaluate electrical apparatus

  1. OHS procedures for a given work area are identified, obtained and understood.
  2. Established OHS risk control measures and procedures in preparation for the work are followed.
  3. Examination and testing area is checked for safety hazards and risk control measures implemented in strict accordance with safety policy and procedures.
  4. Relevant documentation is obtained and read to determine the certification/approval specifications for which the equipment is to be assessed.
OHS procedures for a given work area are identified, obtained and understood.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Established OHS risk control measures and procedures in preparation for the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Examination and testing area is checked for safety hazards and risk control measures implemented in strict accordance with safety policy and procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Relevant documentation is obtained and read to determine the certification/approval specifications for which the equipment is to be assessed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Note:Examples of documentation are those specifying safety requirements, technical standard, as marketed technical performance and product quality endorsement standards.

  1. Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
  2. Tools, testing devices, and materials needed to carry out the work are obtained and checked for correct operation and safety.
Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, testing devices, and materials needed to carry out the work are obtained and checked for correct operation and safety.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Evaluate electrical apparatus

  1. OHS risk control measures and procedures for carrying out the work are followed.
  2. The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures
  3. Circuits/apparatus/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures
  4. In depth knowledge of the performance requirements of electrical apparatus and testing methods are applied to the assessment process.
  5. Apparatus examination and tests are set up in accordance with established test methods and procedures for each particular parameter under scrutiny.
  6. Apparatus examination and tests are carried out methodically and results and comments systematically noted.
  7. Unexpected situations are dealt with safely and with the approval of an authorised person.
  8. Assessment is carried out without damage to systems, circuits, the surrounding environment or services and using sustainable energy practices.
OHS risk control measures and procedures for carrying out the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The need to test or measure live is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Circuits/apparatus/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

In depth knowledge of the performance requirements of electrical apparatus and testing methods are applied to the assessment process.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Apparatus examination and tests are set up in accordance with established test methods and procedures for each particular parameter under scrutiny.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Apparatus examination and tests are carried out methodically and results and comments systematically noted.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unexpected situations are dealt with safely and with the approval of an authorised person.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessment is carried out without damage to systems, circuits, the surrounding environment or services and using sustainable energy practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete work and document evaluate results

  1. OHS work completion risk control measures and procedures are followed.
  2. Work site is cleaned and made safe in accordance with established procedures.
  3. Examination and test results are evaluated and non-compliance issues identified.
  4. Examination, test results and comments on non-compliance issues are documented and reported to appropriate person(s) in accordance with established procedures.
OHS work completion risk control measures and procedures are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work site is cleaned and made safe in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Examination and test results are evaluated and non-compliance issues identified.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Examination, test results and comments on non-compliance issues are documented and reported to appropriate person(s) in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit . It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Evaluate performance of electrical apparatus as described in 8) and including:

A

Interpreting compliance documents.

B

Setting up and conducting appropriate examinations and tests.

C

Identifying non-compliance issues.

D

Reporting examination and test results and non-compliance issues clearly and accurately.

E

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be part of the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to evaluating performance of electrical apparatus.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the industry to which this unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.

Required Skills and Knowledge

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and evaluating performance of electrical apparatus.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.5.23

Performance standards and regulatory requirement for electrical equipment

2.18.1

Occupational Health and Safety principles

2.18.2

Electrical Safe working practices

Range Statement

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to at least two different current-using apparatus and two different control apparatus.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.