NTISthis.com

Evidence Guide: UEENEEH115A - Develop software solutions for microcontroller based systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEENEEH115A - Develop software solutions for microcontroller based systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to develop code.

  1. OHS processes and procedures for a given work area are obtained and understood.
  2. Established OHS risk control measures and procedures in preparation for the work are followed.
  3. The extent of code development work is determined from job performance specifications and in consultations with relevant persons.
  4. Activities are planned to meet scheduled timelines in consultation with others involved on the work.
  5. Appropriate development kit and software are selected based on specified requirements and performance standard.
  6. Strategies are implemented to ensure programming is carried out efficiently.
OHS processes and procedures for a given work area are obtained and understood.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Established OHS risk control measures and procedures in preparation for the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The extent of code development work is determined from job performance specifications and in consultations with relevant persons.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Activities are planned to meet scheduled timelines in consultation with others involved on the work.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate development kit and software are selected based on specified requirements and performance standard.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Strategies are implemented to ensure programming is carried out efficiently.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Develop code.

  1. OHS risk control measures and procedures for carrying out the work are followed.
  2. Correct syntax is applied when developing code.
  3. Key features of the programming language used are applied to develop and test solutions.
OHS risk control measures and procedures for carrying out the work are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Correct syntax is applied when developing code.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Key features of the programming language used are applied to develop and test solutions.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Note: Key features may include use of registers, addressing modes, assembler instructions, subroutines and flags.

  1. Approaches to issues/problems are analysed to provide most effective solutions.
  2. Quality of work is monitored against personal performance agreement and/or established organizational or professional standards.
Approaches to issues/problems are analysed to provide most effective solutions.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Quality of work is monitored against personal performance agreement and/or established organizational or professional standards.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test and document the development of code.

  1. Testing procedures are developed to analyse code.
  2. Problems and bugs in code are rectified to ensure specifications are met.
  3. Intermediate and final work reports are written in accordance with professional standards and presented to appropriate person or persons.
Testing procedures are developed to analyse code.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Problems and bugs in code are rectified to ensure specifications are met.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Intermediate and final work reports are written in accordance with professional standards and presented to appropriate person or persons.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. .

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it must include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment.

Activities associated with normal everyday work influence decisions about how/how much the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines – UEE11’. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Develop software solutions in microcontroller based systems as described in 8) and including:

A

Using methodical problem solving methods.

B

Providing solution to micro software problems.

C

Providing written justification for the solutions to problems.

D

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items.

Note:
Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be part of the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to developing software solutions in microcontroller based systems.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note:

Competent performance with inherent safe working practices is expected in the industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

For optimisation of training and assessment effort, competency development in this unit may be arranged concurrently with unit:

The critical aspects of occupational health and safety covered in unit UEENEEE101A and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.

Required Skills and Knowledge

8) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and developing software for microcontroller based systems.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-EH115A Software programming fundamentals

Evidence shall show an understanding of software programming fundamentals, applying safe working practices and relevant Standards, Codes and Regulations to an extent indicated by the following aspects:

T1. Semiconductor memory

memory cell

antistatic precautions

memory organization

storage capacity and density

T2. Overview of Address decoding

T3. Microprocessor/ Microcontroller architecture

internal architecture of a microprocessor

single chip microcontroller architecture

programming model of microprocessor/ microcontroller

T4. Programming

programming concepts

instruction set

machine code and assembly language high level and low level language

T5. Addressing modes

types of addressing modes

applications for each addressing mode

programming using different addressing modes

T6. Arithmetic and logic instructions

types of arithmetic and logic instructions.

applications for each type of arithmetic and logic instruction.

programming using arithmetic and logic instructions.

T7. Branch instructions and flowcharts

types of branching instructions

applications for each type of branching instruction.

programming using branching instructions.

T8. Subroutines

purpose and applications

stack memory

T9. Timing loops

concept

timing calculations

nested timing loops

programming using timing loops

T10. Input/Output ports

input/output port devices and interfacing

programmable input/ output port ICs

T11. Implementing a program for a specific task

purpose of program

writing the program

debugging and implementing the program

Range Statement

10) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated by developing software solutions in any microcontrollers/microprocessors using the following techniques:

Modifying an existing micro program to comply with specified operating parameters

Developing micro software to comply with a specified function and operating parameters

Debugging software

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.