NTISthis.com

Evidence Guide: UEENEEK046A - Design energy management controls for electrical installations in buildings

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEENEEK046A - Design energy management controls for electrical installations in buildings

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to design energy management techniques for electrical installations in buildings

  1. OHS procedures for a given work area are obtained and understood.
  2. Established OHS risk control measures and procedures in preparation for the work are followed.
  3. The extent of the electrical design is determined from specifications of building and its services, plant and machinery and discussion with appropriate personnel.
  4. Advice is sought from allied trade's areas (e.g. air conditioning) on required energy usage and system design.
  5. Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others.
  6. Tools, testing devices, and materials needed to carry out the work are obtained and checked for correct operation and safety.
OHS procedures for a given work area are obtained and understood.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Established OHS risk control measures and procedures in preparation for the work are followed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The extent of the electrical design is determined from specifications of building and its services, plant and machinery and discussion with appropriate personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Advice is sought from allied trade's areas (e.g. air conditioning) on required energy usage and system design.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Advice is sought from the work supervisor to ensure the work is co-ordinated effectively with others.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, testing devices, and materials needed to carry out the work are obtained and checked for correct operation and safety.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design energy management techniques for electrical installations in buildings

  1. OHS risk control measures and procedures for carrying out the work are followed.
  2. Tests and measurements are carried out in strict accordance with OHS requirements safety procedures.
  3. In-depth knowledge of the energy use of building services, plant and machinery is applied to the design process
  4. Energy evaluation tests are set up in accordance with established test methods and procedures for each particular parameter under scrutiny.
  5. Strategies to reduce energy use without compromising occupancy standards are developed from knowledge of energy management and evaluation test results.
  6. Unexpected situations are dealt with safely and with the approval of an authorised person.
  7. Design and evaluation is carried out without unnecessary damage to systems, circuits, the surrounding environment or services and using sustainable energy practices.
OHS risk control measures and procedures for carrying out the work are followed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tests and measurements are carried out in strict accordance with OHS requirements safety procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

In-depth knowledge of the energy use of building services, plant and machinery is applied to the design process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Energy evaluation tests are set up in accordance with established test methods and procedures for each particular parameter under scrutiny.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Strategies to reduce energy use without compromising occupancy standards are developed from knowledge of energy management and evaluation test results.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unexpected situations are dealt with safely and with the approval of an authorised person.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design and evaluation is carried out without unnecessary damage to systems, circuits, the surrounding environment or services and using sustainable energy practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) This provides essential advice for assessment of the unit of competency and must be read in conjunction with the performance criteria and the range statement of the unit of competency and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

The evidence on which competency in this unit is based shall be considered holistically for each element on at least two occasions comprising:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range; and

Apply sustainable energy principles and practices as specified in the performance criteria and range; and

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements; and

Demonstrate an appropriate level of skills enabling employment; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

Design energy management controls for electrical installations in buildings as listed in the Range statement' and including:

A

Determining the extent of the design

B

Setting up and conducting appropriate examinations and tests.

C

Reporting evaluation including recommendation for improving energy efficiency

D

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this competency standard unit.

Resources required to assess this unit are listed above in Context of assessment', which should also be used in the formal learning/assessment environment.

Note:
Where simulation is considered a suitable strategy for assessment it must ensure that the conditions for assessment are authentic and as far as possible reproduce and replicate the workplace and is consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to designing energy management controls for electrical installations in buildings.

Method of assessment

9.4)

This competency standard unit shall be assessed by methods given in Volume 1, Part 3 "Assessment Guidelines".

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this competency standard unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.

Required Skills and Knowledge

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and designing energy management controls for electrical installations in buildings.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and skills required is given Volume 2 Part 2, Clauses:

2.16.13

Building management systems

2.20.12

Energy efficient building design

Range Statement

8) This relates to the unit of competency as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This competency standard unit shall be demonstrated in relation to designing energy management controls for electrical installations in buildings on at least two buildings each used for a different purpose.

Generic terms are used throughout this Vocational Standard shall be regarded as part of the Range of Variables in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.