The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to diagnose and rectify faults
|
|
Work health and safety (WHS)/occupational health and safety (OHS) processes and procedures for relevant work area are identified and applied in accordance with workplace procedures Completed |
Evidence:
|
Risk control measures are applied in accordance with workplace procedures prior to commencing work |
|
Completed |
Evidence:
|
Extent of work to be undertaken is determined from fault/breakdown reports and/or discussions with relevant person/s |
|
Completed |
Evidence:
|
Instructions for coordinating work with others is obtained from relevant person/s and applied |
|
Completed |
Evidence:
|
Materials required for the work are identified and accessed in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required to locate faults are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Diagnose and rectify faults in RE control systems
|
|
Workplace risk control measures and procedures are applied Completed |
Evidence:
|
Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures |
|
Completed |
Evidence:
|
Circuits/machines/plant are isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Safety hazards resulting from the fault or breakdown are documented and risk control measures identified and implemented in consultation with relevant person/s |
|
Completed |
Evidence:
|
Fault finding of RE systems and interconnecting circuits is approached methodically using measured and calculated values of circuit/apparatus parameters |
|
Completed |
Evidence:
|
Circuit/apparatus components are dismantled, as required, and parts stored to protect against loss or damage |
|
Completed |
Evidence:
|
Faulty circuits/components are rechecked and their fault status confirmed |
|
Completed |
Evidence:
|
Materials/replacement parts required to rectify faults are sourced and obtained in accordance with workplace procedures |
|
Completed |
Evidence:
|
Effectiveness of repair is tested in accordance with workplace procedures |
|
Completed |
Evidence:
|
Apparatus is reassembled, tested and prepared for return to service |
|
Completed |
Evidence:
|
Unexpected events are dealt with safely and with approval of authorised person/s |
|
Completed |
Evidence:
|
Fault-finding and repair activities are completed without damage to apparatus, circuits, the surrounding environment and services using sustainable energy practices |
|
Completed |
Evidence:
|
Complete and report fault-finding and repair activities
|
|
Workplace risk control measures and procedures are applied Completed |
Evidence:
|
Work area is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Justification for repairs to apparatus is documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion is documented and relevant person/s notified in accordance with workplace procedures |
|
Completed |
Evidence:
|