NTISthis.com

Evidence Guide: UEERE0037 - Install, configure and commission LV micro-hydro systems rated up to 6.4 kW

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEERE0037 - Install, configure and commission LV micro-hydro systems rated up to 6.4 kW

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to install LV micro-hydro systems

  1. WHS/OHS processes and procedures for relevant work area are identified and applied in accordance with workplace procedures
WHS/OHS processes and procedures for relevant work area are identified and applied in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

WHS/OHS hazards are identified, risks assessed, reported to relevant person/s and workplace procedures for risk control measures applied in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System installation is planned in consultation with others impacted by the work and sequenced appropriately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Nature and location of the work are determined from documentation or relevant person/s to determine the scope of work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Location of system components is planned within the constraints of the building structure and regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Instructions for coordinating work with others is obtained from relevant person/s and applied

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Material required is obtained in accordance with workplace procedures and checked against job requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices required are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Preparatory work is checked to ensure no damage has occurred and complies with requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install LV micro-hydro systems

  1. Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures
Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Circuits/machines/plant are isolated in accordance with WHS/OHS requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System components are installed in compliance with technical standards, job specifications and requirements, and with sufficient access to enable terminations, adjustment and maintenance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wiring is terminated at system components in accordance with manufacturer specifications and functional and regulatory requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unplanned situations are discussed with relevant person/s and responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Checks of installed apparatus quality are conducted in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apparatus installation is conducted minimising waste of materials, damage to apparatus, circuits, the surrounding environment and services using sustainable energy principles

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete and report installation activities

  1. Worksite is cleaned and made safe in accordance with workplace procedures
Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Final checks are conducted to confirm installed apparatus conforms to requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

‘As-installed’ apparatus and associated equipment are documented and relevant person/s notified in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

reading and interpreting drawings related to and apparatus locations and circuit connections

placing and securing system components accurately

maintaining fire integrity

connecting system components to comply with requirements

dealing with unplanned events

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures and practices, including the use of risk control measures

applying sustainable energy principles and practices

checking isolation of circuits/machines/systems

coordinating work with relevant person/s

determining live electrical testing/measurement requirements

identifying and accessing materials, tools, equipment and testing devices

installing and setting up low voltage (LV) micro-hydro systems, including:

conducting quality checks.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

micro-hydro systems LV installation and maintenance processes, including:

micro-hydro systems LV installation processes encompassing:

selection of an appropriate micro-hydro system taking into account the topology of the site, local council approvals, environmental considerations, site access and transport of equipment, water and power transmission distances and daily and seasonal load profiles

appropriate methods, using appropriate safety procedures, for dam or weir construction, watercourse construction and/or penstock installation, and turbine installation

appropriate installation, testing, commissioning, fault diagnosis and rectification procedures using appropriate safety procedures

schematic and wiring diagrams for the micro-hydro system showing the general circuit layout and protection between the micro-hydro system, batteries, inverter and loads according to AS/NZS 3000 Electrical installations (known as the Australian/New Zealand Wiring Rules), AS/NZS 4509 Stand-alone power systems, and AS 4086.2 Secondary batteries for use with stand-alone power systems – Installation and maintenance requirements

safety procedures for the installation, commissioning, fault diagnosis of system components

micro-hydro systems maintenance processes encompassing:

appropriate maintenance methods using appropriate safety procedures

maintenance schedule for the system

safety procedures for the maintenance of system components

relevant manufacturer specifications

relevant safe work method statements (SWMS)/job safety assessments or risk mitigation processes

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.