The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install/maintain rail signalling power supplies
|
|
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified Completed |
Evidence:
|
Hazards are identified, risks assessed, and control measures and workplace procedures implemented |
|
Completed |
Evidence:
|
Safety hazards which have not previously been identified are noted on job safety assessments and risk control measures are implemented |
|
Completed |
Evidence:
|
Scope of work and location of power supply are determined by site inspection and from job instructions, specifications and/or diagrams |
|
Completed |
Evidence:
|
Materials needed for the installation/maintenance work are obtained in accordance with workplace procedures and checked against job specifications |
|
Completed |
Evidence:
|
Tools, equipment and testing devices needed to install/maintain power supplies are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Install/maintain rail signalling power supplies
|
|
WHS/OHS risk control measures and workplace procedures for carrying out work are followed Completed |
Evidence:
|
Power supply is checked to comply with technical industry standards, job specifications and requirements |
|
Completed |
Evidence:
|
Wiring is run and cables terminated to comply with technical industry standards, job specifications and requirements |
|
Completed |
Evidence:
|
Inspection and tests are conducted to ensure installed/maintained power supply complies with job specifications and functions as intended |
|
Completed |
Evidence:
|
Installation/maintenance of power supply is carried out efficiently, without waste of materials, damage to apparatus, the surrounding environment or services using sustainable energy practices |
|
Completed |
Evidence:
|
Correct functioning of equipment is established from reference to manuals, system specifications and commissioning data |
|
Completed |
Evidence:
|
Faults are identified in accordance with relevant technical information of power supplies and fault-finding techniques |
|
Completed |
Evidence:
|
Faulty, worn, damaged or insecure components are replaced, repaired or secured in accordance with manufacturer specifications and workplace procedures |
|
Completed |
Evidence:
|
Existing methods for dealing with unplanned situations are discussed with appropriate person/s and documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Complete rail signalling power supplies installation/maintenance
|
|
WHS/OHS work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion is documented and appropriate person/s notified in accordance with workplace procedures and relevant reports produced |
|
Completed |
Evidence:
|