The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to maintain electronic and microprocessor-based remote control system
|
|
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified Completed |
Evidence:
|
Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work |
|
Completed |
Evidence:
|
Maintenance program/fault/irregularity reports are reviewed to determine work priorities, resources, logistics and site information |
|
Completed |
Evidence:
|
Appropriate person/s is consulted to ensure work is coordinated effectively with others affected by the work and authorisations are obtained in accordance with workplace procedures |
|
Completed |
Evidence:
|
Materials needed for the work are obtained in accordance with workplace procedures and checked against job specifications |
|
Completed |
Evidence:
|
Tools, equipment and testing devices needed for work are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Maintain electronic and microprocessor-based remote control system
|
|
WHS/OHS risk control measures and workplace procedures for carrying out work are followed Completed |
Evidence:
|
Equipment inspection and checks are carried out to ensure performance is in accordance with operational specifications |
|
Completed |
Evidence:
|
Security of fittings, terminations and mountings are inspected, checked and adjusted, as required, for compliance in accordance with job specifications |
|
Completed |
Evidence:
|
Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes |
|
Completed |
Evidence:
|
Maintenance work is performed efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices |
|
Completed |
Evidence:
|
Appropriate operating parameters are ascertained from job specifications and commissioning data to enable performance checks to be completed |
|
Completed |
Evidence:
|
Appropriate fault-finding and diagnostic techniques are used to verify symptoms or irregularities |
|
Completed |
Evidence:
|
Symptoms are reproduced, monitored and documented, as required |
|
Completed |
Evidence:
|
System is adjusted and operationally tested in accordance with industry technical standards and design specifications |
|
Completed |
Evidence:
|
Appropriate conclusions are determined from fault indicators, error codes, maintenance records and print-outs to assist fault finding |
|
Completed |
Evidence:
|
Appropriate technical support is obtained, as required |
|
Completed |
Evidence:
|
Faulty components are replaced or repaired in accordance with workplace procedures |
|
Completed |
Evidence:
|
Components are terminated, connected system levels adjusted and parameters set in accordance with job specifications |
|
Completed |
Evidence:
|
Complete electronic and microprocessor-based remote control system maintenance and report/s
|
|
WHS/OHS completion risk control work measures and workplace procedures are followed Completed |
Evidence:
|
System is functionally inspected and tested in accordance with specified job parameters and industry standards |
|
Completed |
Evidence:
|
Maintenance documentation is completed, as required, and equipment is labelled, packaged and returned to service, as required |
|
Completed |
Evidence:
|