NTISthis.com

Evidence Guide: UEERS0015 - Maintain electronic and microprocessor-based remote control systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEERS0015 - Maintain electronic and microprocessor-based remote control systems

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to maintain electronic and microprocessor-based remote control system

  1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified
Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures are implemented in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance program/fault/irregularity reports are reviewed to determine work priorities, resources, logistics and site information

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate person/s is consulted to ensure work is coordinated effectively with others affected by the work and authorisations are obtained in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials needed for the work are obtained in accordance with workplace procedures and checked against job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools, equipment and testing devices needed for work are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain electronic and microprocessor-based remote control system

  1. WHS/OHS risk control measures and workplace procedures for carrying out work are followed
WHS/OHS risk control measures and workplace procedures for carrying out work are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment inspection and checks are carried out to ensure performance is in accordance with operational specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Security of fittings, terminations and mountings are inspected, checked and adjusted, as required, for compliance in accordance with job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance work is performed efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate operating parameters are ascertained from job specifications and commissioning data to enable performance checks to be completed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate fault-finding and diagnostic techniques are used to verify symptoms or irregularities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Symptoms are reproduced, monitored and documented, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System is adjusted and operationally tested in accordance with industry technical standards and design specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate conclusions are determined from fault indicators, error codes, maintenance records and print-outs to assist fault finding

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate technical support is obtained, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty components are replaced or repaired in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are terminated, connected system levels adjusted and parameters set in accordance with job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete electronic and microprocessor-based remote control system maintenance and report/s

  1. WHS/OHS completion risk control work measures and workplace procedures are followed
WHS/OHS completion risk control work measures and workplace procedures are followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

System is functionally inspected and tested in accordance with specified job parameters and industry standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance documentation is completed, as required, and equipment is labelled, packaged and returned to service, as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

interpreting specifications, circuit diagrams and workplace procedures correctly

using appropriate diagnosis and fault-finding techniques to sub-module level

maintaining electronic switched and microprocessor-based remote control systems to operational requirements (to sub-module level)

working efficiently and effectively

using tools and test equipment correctly

following relevant codes of practice, work health and safety (WHS)/occupational health and safety (OHS) and environmental protection procedures and requirements

completing relevant technical reports, records and documentation

dealing with unplanned events

applying rail safe working practices and relevant industry standards, codes and rail safety regulations

applying relevant WHS/OHS requirements, including:

implementing workplace procedures and practices

using risk control measures

applying sustainable energy principles and practices

completing maintenance and reporting of electronic and microprocessor-based remote control system.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

rail signalling remote control system maintenance, safe working practices and relevant standards, codes and regulations, including:

maintenance principles encompassing:

maintenance function

role of maintenance department

WHS/OHS requirements

maintenance systems encompassing:

maintenance terminology

preventative maintenance

predictive maintenance

corrective maintenance

data acquisition encompassing:

plant history cards/files

inspection techniques

predictive maintenance

remote visual inspection

non-destructive testing

thermography

vibration analysis

oil analysis

rail signalling maintenance plans encompassing:

characteristics

maintenance windows

required resources (labour and materials)

procedures and records

maintenance of rail signalling electronics and microprocessor-based remote control systems

components requiring maintenance

rail safe working practices encompassing:

rail enterprise safety standard and procedures

rail safe working requirements

possessions protection and management

WHS/OHS requirements

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications

relevant industry standards, codes of practice, regulations and WHS/OHS legislated requirements

relevant workplace documentation.

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.