Prepare to maintain rail signalling power supplies

1. Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and clarified

Completed
Date:

Hazards are identified, risks assessed, and control measures and workplace procedures implemented

Completed
Date:

Safety hazards which have not previously been identified are noted on job safety assessments and risk control measures are implemented

Completed
Date:

Scope of work and location of power supply are determined by site inspection and from job instructions, specifications and/or diagrams

Completed
Date:

Batteries and type within the signalling location and management processes for the associated safety hazards are identified

Completed
Date:

Materials needed for the maintenance work are obtained in accordance with workplace procedures and checked against job specifications

Completed
Date:

Tools, equipment and testing devices needed to maintain power supplies are obtained in accordance with workplace procedures and checked for correct operation and safety

Completed
Date:

Authorisation to take temporarily out of service or disable systems is obtained in accordance with workplace procedures

Completed
Date:

Maintain rail signalling power supplies

1. WHS/OHS risk control measures and workplace procedures for carrying out work are followed

Completed
Date:

On-track safe working requirements are identified and applied in accordance with workplace procedures and safety management system

Completed
Date:

Power supply is checked to comply with technical industry standards, job specifications and requirements

Completed
Date:

Wiring and cable terminations are inspected to comply with technical industry standards, approved design drawings and requirements

Completed
Date:

Inspection and tests are conducted to ensure maintained power supply complies with job specifications and functions as intended

Completed
Date:

Maintenance of power supply is carried out efficiently, without waste of materials, damage to apparatus, the surrounding environment or services using sustainable energy practices

Completed
Date:

Correct functioning of equipment is established from reference to manuals, system specifications and commissioning data

Completed
Date:

Batteries are inspected and tested to ensure satisfactory operation and condition

Completed
Date:

Faults are identified in accordance with relevant technical information of power supplies and fault-finding techniques

Completed
Date:

Faulty, worn, damaged or insecure components are replaced, repaired or secured in accordance with manufacturer specifications and workplace procedures

Completed
Date:

Existing methods for dealing with unplanned situations are discussed with appropriate person/s and documented in accordance with workplace procedures

Completed
Date:

Complete rail signalling power supplies maintenance

1. WHS/OHS work completion risk control measures and workplace procedures are followed

Completed
Date:

Confirmation that system is functional and that no alarms are present or indicated

Completed
Date:

Test results for the batteries and power supplies are recorded

Completed
Date:

Worksite is cleaned and made safe in accordance with workplace procedures

Completed
Date:

Work completion is documented, and appropriate person/s notified in accordance with workplace procedures and relevant reports produced

Completed
Date: