The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to repair and maintain gas fuelled turbine engine
|
|
Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood Completed |
Evidence:
|
Job requirements are obtained and interpreted from plans, specifications and instructions |
|
Completed |
Evidence:
|
Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s, including third parties, to determine and confirm work schedule and respective responsibilities |
|
Completed |
Evidence:
|
Hazards are identified, workplace safety and environmental risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures |
|
Completed |
Evidence:
|
Scope of responsibility under the relevant job requirements, including all work permits and/or relevant notifications, is determined and confirmed to access the services and perform work in accordance with job requirements and workplace procedures |
|
Completed |
Evidence:
|
Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions |
|
Completed |
Evidence:
|
Materials, plans, diagrams, drawings and resources required for work are confirmed and obtained in accordance with workplace procedures |
|
Completed |
Evidence:
|
Repair and maintain gas fuelled turbine engine
|
|
Workplace safety and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed Completed |
Evidence:
|
Relevant gas regulatory and codes of practice, and recording and reporting requirements are satisfied at appropriate times throughout the work sequence |
|
Completed |
Evidence:
|
Gas and electrical circuits/machines/plant are isolated and safe in accordance with authority, workplace safety requirements and workplace procedures before work is commenced |
|
Completed |
Evidence:
|
Nature and possible cause of faults or out-of-specification performance are identified from defect reports or operational records |
|
Completed |
Evidence:
|
Faults and operational conditions of the components are identified, repaired or replaced, and reported in accordance with organisational job requirements |
|
Completed |
Evidence:
|
Engine is disconnected to carry out maintenance and repairs, as required, in accordance with gas authority and workplace safety requirements and workplace procedures |
|
Completed |
Evidence:
|
Components are removed/dismantled, and parts stored to protect them against loss or damage, as required |
|
Completed |
Evidence:
|
Faulty components are rechecked, and their fault status confirmed |
|
Completed |
Evidence:
|
Gas fuelled turbine engine materials required to rectify faults are sourced and obtained in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work is coordinated to ensure completion in agreed timeframe and to industry standards with a minimum of waste in accordance with job requirements and workplace procedures |
|
Completed |
Evidence:
|
Effectiveness of the repair is inspected and tested in accordance with workplace procedures |
|
Completed |
Evidence:
|
Quality and safety checks of the work are conducted in accordance with job requirements, workplace procedures and community and industry standards |
|
Completed |
Evidence:
|
Unplanned events and non-routine problems are identified and actioned in accordance with workplace procedures |
|
Completed |
Evidence:
|
Complete and report repair and maintenance
|
|
Workplace safety work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Check of the gas fuelled turbine engine is made to verify compliance with job requirements, certification required by relevant gas authorities and industry standards |
|
Completed |
Evidence:
|
Incidents and injuries are reported and followed up as required in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are cleaned, checked, serviced and stored in accordance with manufacturer recommendations and workplace procedures |
|
Completed |
Evidence:
|
Worksite is cleaned/tidied and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures |
|
Completed |
Evidence:
|