NTISthis.com

Evidence Guide: UEPMNT202A - Carry out routine work activities in an ESI large scale wind generation environment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEPMNT202A - Carry out routine work activities in an ESI large scale wind generation environment

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to undertake routine work activities.

  1. Instructions for preparing the work activity are communicated and confirmed to ensure clear understanding.
  2. OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply to the carrying out of the work.
  3. Tools, equipment and personnel protective equipment necessary for the work are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures.
  4. Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved.
  5. Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures.
  6. Schedule of work including practices for working safely are confirmed in accordance with instructions and requirements.
Instructions for preparing the work activity are communicated and confirmed to ensure clear understanding.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OHS policies and procedures are communicated and confirmed to ensure they are understood as they apply to the carrying out of the work.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and personnel protective equipment necessary for the work are identified, scheduled and checked to ensure they work correctly as intended and are safe to use in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate personnel are consulted to ensure the work is coordinated effectively with others involved.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Resources and materials needed to do the work are confirmed, scheduled and obtained in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Schedule of work including practices for working safely are confirmed in accordance with instructions and requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Carry out work as instructed.

  1. OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents.
  2. Schedule of work is followed to ensure work is completed in an agreed time, to a quality standard and with a minimum of waste.
  3. Knowledge of work practices applicable to the wind generation industry are applied to routine work activities.
  4. Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions.
  5. Ongoing checks of work quality are undertaken in accordance with instructions and requirements.
OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Schedule of work is followed to ensure work is completed in an agreed time, to a quality standard and with a minimum of waste.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Knowledge of work practices applicable to the wind generation industry are applied to routine work activities.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Further instructions are sought from appropriate personnel in the event of unplanned happenings or conditions.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ongoing checks of work quality are undertaken in accordance with instructions and requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check results of the completed work.

  1. Final checks are made to ensure the work conforms with instructions and to requirements.
  2. Appropriate personnel are notified of completion of the work.
  3. Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.
  4. Work area is cleaned up and made safe and sustainable energy practices are followed.
  5. Appropriate records are updated in accordance with instructions and established procedures.
Final checks are made to ensure the work conforms with instructions and to requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate personnel are notified of completion of the work.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work area is cleaned up and made safe and sustainable energy practices are followed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate records are updated in accordance with instructions and established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines, Section 3.1 of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated:

On at least two (2) occasions. In accordance with the "Assessment Guidelines” for the UEP12 Training Package.

Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframe typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range; and

Apply sustainable energy principles and practices as specified in the Performance Criteria and range; and

Demonstrate an understanding of the required skills and knowledge as described in this unit to such an extent that the learner's performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and

Demonstrate an appropriate level of employability skills; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

A

All of the following

Receive a stock delivery and enter into the stock management system

Store stock using appropriate work, health and safety practices

Retrieve a stock item and check it out of the stock management system

B

All of the following

Clean up an oil spill

Clean up a grease spill

Retrieve an MSDS for a cleaning solvent

C

All of the following

Grease a bearing

Refill Greasers

D

All of the following

Deal with an unplanned event by drawing on essential knowledge and skills to provide appropriate solutions.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to:

Carry out routine work activities in an ESI large scale wind generation environment.

Method of assessment

9.4)

This unit shall be assessed by methods given in the Assessment Guidelines, Section 1.3 of this Training Package.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this competency standard unit applies. This requires assessment in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.

Required Skills and Knowledge

8) This describes the essential skills and knowledge and their level, required for this unit.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-PM202A

Routine work activities in an ESI large scale wind generation environment

Evidence shall show that knowledge has been acquired of routine work activities in an ESI large scale wind generation environment to the extent indicated by the following aspects:

T1. The wind generation industry

Climate change

Mix of electricity generation in the marketplace

T2. Wind generation

Power available in the wind

Classes of Wind Turbine Generator(WTG)

Geographic placement of WTGs

T3. Workplace health and safety in the wind generation industry

Electrical

Mechanical

Hydraulic

Working in environmental climates subject to high wind velocity

Working at heights on a WTG

T4. Components that form a WTG

Tower

Blades

Nacelle

Generator

DC/AC converter

Power transformer

Grid connection

Control systems

SCADA and similar control systems

T5. Lubrication

Refilling of automatic greasing systems

Checking oil levels

Confirming lubrication of components

T6. Cleaning

Excess grease

Dust

Oil

Water

Salt

Cleaning chemicals

Appropriateness of use

MSDS for cleaning products

Use of cleaning products in restricted spaces

Prohibited cleaning solvents

T7. Warehousing

Enterprise procedures for managing stock levels

Computer stock control

Loading and unloading stock and products

Shelving

Inward goods receiving

Manual handling

Trolleys

Enterprise communication protocols

Range Statement

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Large Scale Wind Generators (WTGs) include systems having a rating of greater than 10 kW

Routine work activities include:

Assisting experienced technicians with scheduled servicing

Fillng of auto-greasers

Routine work activities are restricted to access to the WTG tower and the nacelle

Tools include spanners, screwdrivers, torque wrenches,

Cleaning equipment includes rags, chemical cleaners

Stock management systems include computer-based, internet, and paper-based enterprise systems and documents

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in the Glossaries, Section 2.1 of this Training Package.