The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare the work
|
|
Work requirements are identified from request/work orders or equivalent and clarified/confirmed with appropriate parties or by site inspection. Completed |
Evidence:
|
Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers’ specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedures. Completed |
Evidence:
|
Resources required to satisfy the work plan are identified, obtained and inspected for compliance with the job specifications. Completed |
Evidence:
|
Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan. Completed |
Evidence:
|
Correct size, type and quantity of materials/components are determined, obtained and inspected for compliance with the job specifications. Completed |
Evidence:
|
Work is planned in detail including sequencing and prioritising and considerations made, where appropriate, for the maintenance of plan security and capacity in accordance with system/site requirements. Completed |
Evidence:
|
Co-ordination requirements, including requests for isolations where appropriate, are resolved with others involved, affected or required by the work. Completed |
Evidence:
|
Potential hazards are identified and prevention and/or control measures are selected in accordance with the work plan and site procedures. Completed |
Evidence:
|
Work area is prepared in accordance with work requirements and site procedures. Completed |
Evidence:
|
Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of on-the-job training. Completed |
Evidence:
|
Verify the fault
|
|
Normal performance and function of the equipment is ascertained by consulting appropriate reference sources in accordance with the work plan. Completed |
Evidence:
|
Fault indicators, appropriate technical information/diagnostic techniques are used to verify reported symptoms/faults in accordance with the work plan. Completed |
Evidence:
|
Symptoms are reproduced and monitored if possible, whilst due regard for personnel safety and plant security is observed in accordance with the work plan. Completed |
Evidence:
|
Find the fault
|
|
Required isolations are confirmed where appropriate in accordance with site requirements. Completed |
Evidence:
|
Fault finding is carried out in conjunction with others involved in, or affected by, the work in accordance with enterprise/job requirements. Completed |
Evidence:
|
Equipment components, wires, cables, terminations and support fixings are inspected for obvious faults in accordance with the work plan. Completed |
Evidence:
|
All appropriate fault finding/diagnostic techniques are identified, selected and used to determine the fault in accordance with the work plan. Completed |
Evidence:
|
All appropriate components are disconnected to enable accurate test measurements of suspected faulty components without the concern of "back feed" readings in accordance with the work plan. Completed |
Evidence:
|
Test and measurement instruments are used in accordance with manufacturers’ job requirements. Completed |
Evidence:
|
Determine cause of fault
|
|
All appropriate personnel are consulted in order to obtain as many details relating to the faulty equipment as possible in accordance with the work plan. Completed |
Evidence:
|
Appropriate use is made of any information from fault indicators and maintenance records in accordance with the work plan. Completed |
Evidence:
|
Valid conclusions about the nature and cause of the fault are reached from analysis of available evidence in accordance with the work plan. Completed |
Evidence:
|
Repair or rectify the fault
|
|
Required isolations are confirmed where appropriate in accordance with site requirements. Completed |
Evidence:
|
Appropriate repair procedures are undertaken in conjunction with others involved in, or affected by, the work in accordance with the work plan. Completed |
Evidence:
|
Faulty, worn, damaged or unsecured components are replaced, repaired or secured in accordance with the work plan. Completed |
Evidence:
|
Parts and components are selected and replaced as required in accordance with appropriate specifications and the work plan. Completed |
Evidence:
|
Components disconnected for testing are reconnected having been proven free of faults and all terminations are then checked to ensure they are electrically and mechanically sound in accordance with the work plan. Completed |
Evidence:
|
All faults are repaired or rectified in accordance with the work plan. Completed |
Evidence:
|
Final job inspection is performed and permits are relinquished as required in accordance with the work plan. Completed |
Evidence:
|
Complete the work
|
|
Work is completed and appropriate personnel notified in accordance with site/enterprise requirements. Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures. Completed |
Evidence:
|
Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures. Completed |
Evidence:
|
Work completion details are finalised in accordance with site/enterprise procedures. Completed |
Evidence:
|