The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare work
|
|
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work Completed |
Evidence:
|
Resources are obtained and inspected for compliance with job specification Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected for compliance with job specifications Completed |
Evidence:
|
Work is planned, sequenced and prioritised, in accordance with workplace procedures Completed |
Evidence:
|
Potential hazards are identified and risk control measures are implemented, in accordance with workplace procedures Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures Completed |
Evidence:
|
Verify fault
|
|
Wind turbine mechanical system function is determined by referring to principles, drawings, flow charts, equipment manuals and expert personnel Completed |
Evidence:
|
Fault indicators, technical information and diagnostic techniques are used to verify reported wind turbine mechanical system faults, in accordance with workplace procedures Completed |
Evidence:
|
Wind turbine mechanical system faults are reproduced and monitored, if practical, in accordance with workplace procedures Completed |
Evidence:
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements Completed |
Evidence:
|
Wind turbine mechanical system equipment components, pipes, couplings, gears and support fixings are inspected for obvious faults, in accordance with workplace procedures Completed |
Evidence:
|
Fault finding and diagnostic techniques are selected and used to determine fault cause, in accordance with workplace procedures Completed |
Evidence:
|
Wind turbine mechanical system faulty equipment or components are localised and/or isolated, and the malfunction is confirmed by inspection and testing, in accordance with site requirements and workplace procedures Completed |
Evidence:
|
Test and measurement instruments are used, in accordance with manufacturers’ instructions Completed |
Evidence:
|
Repair fault
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Wind turbine mechanical system's faulty, worn, damaged or unsecured equipment or components are repaired, in accordance with workplace procedures Completed |
Evidence:
|
All faults are repaired, in accordance with the workplace procedures Completed |
Evidence:
|
Correct operation of wind turbine mechanical system is confirmed, in accordance with site requirements and workplace procedures Completed |
Evidence:
|
Final inspection is performed, in accordance with workplace procedures Completed |
Evidence:
|
Complete work
|
|
Work is completed and appropriate are personnel notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures Completed |
Evidence:
|
Tools and equipment are maintained and stored, in accordance with workplace procedures Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures Completed |
Evidence:
|
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work |
|
Completed |
Evidence:
|
Resources are obtained and inspected for compliance with job specification |
|
Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected for compliance with job specifications |
|
Completed |
Evidence:
|
Work is planned, sequenced and prioritised, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Potential hazards are identified and risk control measures are implemented, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures
|
|
Wind turbine mechanical system function is determined by referring to principles, drawings, flow charts, equipment manuals and expert personnel Completed |
Evidence:
|
Fault indicators, technical information and diagnostic techniques are used to verify reported wind turbine mechanical system faults, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Wind turbine mechanical system faults are reproduced and monitored, if practical, in accordance with workplace procedures
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements Completed |
Evidence:
|
Wind turbine mechanical system equipment components, pipes, couplings, gears and support fixings are inspected for obvious faults, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Fault finding and diagnostic techniques are selected and used to determine fault cause, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Wind turbine mechanical system faulty equipment or components are localised and/or isolated, and the malfunction is confirmed by inspection and testing, in accordance with site requirements and workplace procedures |
|
Completed |
Evidence:
|
Test and measurement instruments are used, in accordance with manufacturers’ instructions |
|
Completed |
Evidence:
|
Determine cause of fault
|
|
Appropriate personnel are consulted to obtain details relating to faulty equipment Completed |
Evidence:
|
Wind turbine mechanical system monitoring equipment, fault indicators and maintenance records are reviewed to obtain details relating to fault |
|
Completed |
Evidence:
|
Analysis on cause of wind turbine mechanical system fault is completed, in accordance with the workplace procedures
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Wind turbine mechanical system's faulty, worn, damaged or unsecured equipment or components are repaired, in accordance with workplace procedures |
|
Completed |
Evidence:
|
All faults are repaired, in accordance with the workplace procedures |
|
Completed |
Evidence:
|
Correct operation of wind turbine mechanical system is confirmed, in accordance with site requirements and workplace procedures |
|
Completed |
Evidence:
|
Final inspection is performed, in accordance with workplace procedures
|
|
Work is completed and appropriate are personnel notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are maintained and stored, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures |
|
Completed |
Evidence:
|