NTISthis.com

Evidence Guide: UEPOPS318B - Operate and monitor compressed gas systems

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEPOPS318B - Operate and monitor compressed gas systems

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare work

  1. Safety issues are identified to comply with enterprise/site requirements
  2. Work requirements are identified from relevant personnel and documentation
  3. Documentation to determine plant status is assessed and evaluated
  4. Localised plant inspection and field preparations for service are carried out in accordance with enterprise operational requirements
  5. Plant operational pre-requisites are established in accordance with manufacturer and enterprise/site requirements
  6. Sequence for recommissioning of plant is determined to suit existing circumstances in accordance with enterprise/site requirements
  7. Where appropriate the teams and individuals roles and responsibilities within the team are identified, and where required, assist in the provision of the on-the-job training
Safety issues are identified to comply with enterprise/site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work requirements are identified from relevant personnel and documentation

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Documentation to determine plant status is assessed and evaluated

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Localised plant inspection and field preparations for service are carried out in accordance with enterprise operational requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant operational pre-requisites are established in accordance with manufacturer and enterprise/site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sequence for recommissioning of plant is determined to suit existing circumstances in accordance with enterprise/site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Where appropriate the teams and individuals roles and responsibilities within the team are identified, and where required, assist in the provision of the on-the-job training

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operate plant

  1. Plant is operated in accordance with enterprise, site and manufacturer operating procedures
  2. Plant is monitored and observed to detect deviations from normal operating conditions
  3. Corrective actions taken to rectify abnormalities are in accordance with enterprise and site requirements
  4. Plant to be removed from service is locally identified and removed from service in accordance with enterprise and site requirements
  5. Corrective actions are taken in accordance with enterprise safety rules and site requirements when abnormalities are identified during the removal from service
Plant is operated in accordance with enterprise, site and manufacturer operating procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant is monitored and observed to detect deviations from normal operating conditions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Corrective actions taken to rectify abnormalities are in accordance with enterprise and site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant to be removed from service is locally identified and removed from service in accordance with enterprise and site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Corrective actions are taken in accordance with enterprise safety rules and site requirements when abnormalities are identified during the removal from service

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Test plant operation

  1. Tests are performed in accordance with defined procedures applicable to the operational test
  2. Plant is observed for correct operational response
  3. Corrective action is taken when response is not in accordance with documentation, plant integrity or personnel safety requirements
  4. Plant is returned to required operational status upon completion of test
Tests are performed in accordance with defined procedures applicable to the operational test

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant is observed for correct operational response

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Corrective action is taken when response is not in accordance with documentation, plant integrity or personnel safety requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant is returned to required operational status upon completion of test

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Analyse plant faults

  1. Causes of abnormal plant operating conditions are identified by analysing the technical and operational information in a logical and sequential manner
  2. Corrective action taken is in accordance with enterprise procedures
  3. Plant integrity and personnel safety is maintained through consultation with appropriate personnel, and with reference to plant, technical and operational documentation
Causes of abnormal plant operating conditions are identified by analysing the technical and operational information in a logical and sequential manner

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Corrective action taken is in accordance with enterprise procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant integrity and personnel safety is maintained through consultation with appropriate personnel, and with reference to plant, technical and operational documentation

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Monitor and inspect plant

  1. Plant to be monitored/inspected is physically identified
  2. Plant is monitored/inspected for normal operation or to detect deviations
  3. Corrective action taken is in accordance with enterprise/site procedures
  4. Appropriate personnel are notified when defects are detected
Plant to be monitored/inspected is physically identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant is monitored/inspected for normal operation or to detect deviations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Corrective action taken is in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Appropriate personnel are notified when defects are detected

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete documentation

  1. Documentation is updated and plant problems, movements, abnormalities and status are reported and logged in accordance with enterprise/site procedures
Documentation is updated and plant problems, movements, abnormalities and status are reported and logged in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) This provides essential advice for assessment of the unit of competency and must be read in conjunction with the Performance Criteria and the Range Statement of the unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitude competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all pre-requisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the “Assessment Guidelines – UEP12”. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and Range Statement

Apply sustainable energy principles and practices as specified in the Performance Criteria and Range Statement

Demonstrate an understanding of the essential knowledge and associated skills as described in 6) Essential Knowledge and Associated Skills of this unit

Demonstrate an appropriate level of employability skills

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated performance across a representative range of contexts from the prescribed items below:

Knowledge and application of relevant sections of: Occupational Health and Safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures

Preparation and planning of work

Operation of compressed gas system

Operationally testing plant

Analysing plant faults

Monitoring plant operation

Knowledge of the properties of gases, their use and precautions to be taken

Dealing with an unplanned event by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions.

Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application of work.

In addition to the resources listed above in Context of assessment’, evidence should show competency working, in limited spaces, with different types of plant and equipment as well as different structural/construction types and methods and in a variety of environments.

Method of assessment

9.4)

This unit shall be assessed by methods given in Section 1.3.00 Assessment Guidelines.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied competency standard units where listed.

Nil

Required Skills and Knowledge

8) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of operating and monitoring compressed gas systems.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the Essential Knowledge and Associated Skills required follows:

KS01-PO318B Compressed gas systems

Evidence shall show that knowledge has been acquired for safe working practices of:

T1 Relevant Environmental, Occupational Health and Safety legislation and regulations

T2 Enterprise procedures

T3 Plant drawings and manufacturers manuals

T4 Introduction to and typical arrangements of power production plant

T5 Relevant plant and equipment, its location and operating parameters

T6 Electric motor types and characteristics

T7 Pump and compressor types and characteristics

T8 Valve, damper and actuator types and characteristics

T9 Switchgear types and characteristics

T10 Electrical protection types and characteristics

T11 Relevant state and territory regulations

T12 Plant status

T13 Enterprise recording procedures

T14 Communication principles

T15 Computers and software; Supervisory, alarm, protection and control equipment

T16 Emergency procedures

T17 Properties of gases, their uses and precautions to be taken

T18 Properties of matter

T19 Lubrication and bearings

KS01-PO318B Compressed gas systems

Specific skills needed to achieve the Performance Criteria:

T1 Interpret plant drawings and manufacturers manuals

T2 Apply relevant state and territory regulations

T3 Apply enterprise recording procedures

T4 Identify plant status

T5 Prepare plant/equipment for operation

T6 Organise resources

T7 Operate compressed gas systems

T8 Apply diagnostic and testing techniques

T9 Identify and respond to abnormal plant operating conditions

T10 Plan and prioritise work

T11 Use relevant hand tools

T12 Communicate effectively

T13 Apply data analysis techniques and tools

Range Statement

10) This relates to the unit of competency as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Systems, plant and or equipment may include electrical supply switchboard(s) and transformers; compressors; electrical motors; valves, actuators and dampers (electric, hydraulic, pneumatic, mechanical and manual); supervisory, protection, alarm and control equipment; cooling water plant and equipment; filters; strainers; moisture removal devices; pressure control devices; safety devices; high and low pressure systems; and fans.

Gases may include nitrogen, ammonia, hydrogen and chlorine, carbon dioxide and Liquid Natural Gas.

Safety standards may include relevant sections of Occupational Health and Safety legislation, enterprise safety rules, relevant state and federal legislation, national standards for plant and Australian standards.

Information and documentation sources may include verbal and written communications, enterprise/site safety rules documentation/forms, equipment and alarm manuals, dedicated computer equipment, enterprise operating instructions, enterprise/site log book, enterprise standing instructions and plant notes and materials handling data sheets.

Technical and operational indicators may include stimuli (audio, smell, touch, visual), local indicators and recorders, computers and alarms (visible and or audible).

Communications may be by means of telephone, two way radio, pager, computer (electronic mail), operating log (written or verbal) and public address system.

Tests may include motor direction checks, stand-by plant “cut-in” tests and performance tests.

Appropriate personnel to consult, give or receive direction may include; supervisor/team leader or equivalent, power plant operations personnel or equivalent, technical and engineering officers or equivalent, contractor staff and maintenance staff.

Test, fault finding and operating tools may include hand and power tools, proving dead equipment and high voltage testers.

Operating environment may be during inclement or otherwise harsh weather conditions, in wet/noisy/dusty/hot areas and during continuous operation.

Faults and abnormal operating conditions may include motor/pump/actuator/ valve/damper failure/malfunction, control equipment failure/malfunctions, loss of electrical supply to plant and equipment, loss/low cooling air/water, lubricating/power oil flow to plant/equipment, excessive vibration pumps/motors, high air/oil strainer /filter/ differentials, moisture removal plant and equipment malfunctions and excessive vibration pumps/motors.

Generic terms are used throughout this Training Package for vocational standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms are given in Section 2.1 Preliminary Information and Glossaries.