NTISthis.com

Evidence Guide: UEPOPS402B - Conduct multiple energy source isolation procedures for permit to work

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEPOPS402B - Conduct multiple energy source isolation procedures for permit to work

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for isolation, de-isolation and restoration

  1. Work requirements are identified from request/work orders or equivalent and clarified/confirmed with the appropriate parties or by site inspection
  2. Safety issues are identified to comply with statutory, enterprise and site requirements
  3. Materials, equipment and resources required to satisfy the job plan are identified, requisitioned, obtained and inspected for compliance with job specifications
  4. Work is planned in detail with the responsible issuing officer, including sequencing and prioritising of work, and the maintenance of plant security and capacity in accordance with permit/site requirements
  5. Job requirements including permits/risk assessment are coordinated with other personnel involved in, or affected by, the isolation in accordance with enterprise/site requirements
  6. Where appropriate the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of on-the-job training
Work requirements are identified from request/work orders or equivalent and clarified/confirmed with the appropriate parties or by site inspection

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Safety issues are identified to comply with statutory, enterprise and site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Materials, equipment and resources required to satisfy the job plan are identified, requisitioned, obtained and inspected for compliance with job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work is planned in detail with the responsible issuing officer, including sequencing and prioritising of work, and the maintenance of plant security and capacity in accordance with permit/site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Job requirements including permits/risk assessment are coordinated with other personnel involved in, or affected by, the isolation in accordance with enterprise/site requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Where appropriate the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of on-the-job training

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform isolation

  1. Plant to be isolated is correctly identified
  2. Isolation is performed in accordance with enterprise/site permit to work procedures
  3. Verify the effectiveness of the isolation, dissipation and restraint of energy sources in accordance with enterprise/site procedures
  4. Isolations are confirmed with others involved in, or affected by, the work in accordance with enterprise/site procedures
Plant to be isolated is correctly identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Isolation is performed in accordance with enterprise/site permit to work procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Verify the effectiveness of the isolation, dissipation and restraint of energy sources in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Isolations are confirmed with others involved in, or affected by, the work in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Perform de-isolation and restoration

  1. De-isolation and restoration of plant is performed in accordance with permit to work procedures
  2. De-isolations are confirmed with others involved in, or affected by, the work in accordance with enterprise/site procedures
  3. Work completion details are finalised in accordance with enterprise/site procedures
De-isolation and restoration of plant is performed in accordance with permit to work procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

De-isolations are confirmed with others involved in, or affected by, the work in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work completion details are finalised in accordance with enterprise/site procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the Range Statement of the unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this competency standard unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitude competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all pre-requisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the “Assessment Guidelines – UEP12”. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and Range Statement

Apply sustainable energy principles and practices as specified in the Performance Criteria and Range Statement

Demonstrate an understanding of the essential knowledge and associated skills as described in 6) Essential Knowledge and Associated Skills of this unit

Demonstrate an appropriate level of employability skills

Conduct work observing the relevant Anti-Discrimination legislation, regulations, polices and workplace procedure

Demonstrated performance across a representative range of contexts from the prescribed items below:

The knowledge and application of relevant sections of: Occupational Health and Safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures, Applying isolation procedures

Dealing with an unplanned event by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions.

Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application of work.

In addition to the resources listed above in Context of assessment’, evidence should show competency working in limited spaces with different types of plant and equipment as well as different structural/construction types and methods and in a variety of environments.

Method of assessment

9.4)

This unit shall be assessed by methods given in Section 1.3.00 Assessment Guidelines.

Note: Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills.

Concurrent assessment and relationship with other units

9.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied competency standard units where listed.

UEPOPS301B

Conduct single energy source isolation procedures for permit to work

Required Skills and Knowledge

8) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired conducting multiple energy source isolation procedures for permit to work.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the Essential Knowledge and Associated Skills required follows:

KS01-PO 402B Multiple energy source isolation procedures for permit to work

T1 Evidence shall show that knowledge has been acquired for safe working practices of:

Relevant environmental, occupational health and safety legislation and regulations

Enterprise procedures

Plant drawings and manufacturers manuals

Introduction to and typical arrangements of power production plant

Relevant plant and equipment, its location and operating parameters

Relevant state and territory regulations

Plant status

Mechanical equipment isolation techniques

Electrical equipment isolation techniques

Mechanical isolation equipment types and characteristics

Electrical isolation equipment types and characteristics

Enterprise recording procedures

Isolating procedures

Electrical principles

Auxiliary supply systems

Safe operating principles

T2 Specific skills needed to achieve the Performance Criteria:

Interpret plant drawings and manufacturers manuals

Apply relevant state and territory regulations

Apply enterprise recording procedures

Identify plant status

Prepare plant/equipment for operation

Communicate effectively

Apply isolating procedures

Plan and prioritise work

Range Statement

10) This relates to the competency standard unit as a whole, providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Other personnel involved may include issuing officer, isolating officers, recipient in charge and testing officer or their equivalent.

Work completion details may include log books, computer input.

Gaining access to specific HV apparatus.

ESAA Safe isolation and Access Guidelines.

Permits may include any documentation/forms approved for use by the enterprise safety rules and permit to work procedures.

Plant flow diagrams, single line diagrams, protection diagrams, manufacturers manuals

Energy sources may include but not be limited to Electrical (HV) (LV), Mechanical, Electrical, Refrigeration (CFC) and Radioactive Sources.

Generic terms are used throughout this Training Package for vocational standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms are given in Section 2.1 Preliminary Information and Glossaries.