The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for the work
|
|
Work requirements are identified from request/work orders or equivalent and clarified/confirmed with appropriate parties or by detailed site inspection and commissioning / decommissioning meeting of stakeholders Completed |
Evidence:
|
Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers’ specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedure Completed |
Evidence:
|
Resources required to satisfy the work plan are identified, obtained and inspected for compliance with the job specifications Completed |
Evidence:
|
Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan Completed |
Evidence:
|
Correct size, type and quantity of resources are determined, obtained and inspected for compliance with requirements. Completed |
Evidence:
|
Work is planned in detail including sequencing and prioritising and considerations made where appropriate for the maintenance of plant security and capacity in accordance with system/site requirements Completed |
Evidence:
|
Multiple coordination requirements, including requests for isolations and sequencing are resolved with others involved, affected or required by the work Completed |
Evidence:
|
Potential hazards are identified and prevention and/or control measures are approved in accordance with procedures Completed |
Evidence:
|
Work area is determined and approved in accordance with work / manufacturer’s requirements and site procedures Completed |
Evidence:
|
Teams and individuals roles and responsibilities are identified, clarified, prioritised and scheduled in accordance with requirements Completed |
Evidence:
|
Commission plant or equipment
|
|
Required isolations are confirmed where appropriate in accordance with site requirements Completed |
Evidence:
|
Equipment is commissioned in conjunction with others involved in, or affected by, the work in accordance with the work plan Completed |
Evidence:
|
Equipment is connected to energy and/or material sources in accordance with the work plan Completed |
Evidence:
|
Equipment is commissioned in accordance with the work plan and specifications Completed |
Evidence:
|
Decommission plant or equipment
|
|
Required isolations are confirmed where appropriate in accordance with site requirements Completed |
Evidence:
|
Equipment is decommissioned in conjunction with others involved in, or affected by, the work, in accordance with the work plan Completed |
Evidence:
|
Equipment is disconnected from energy and/or material sources in accordance with the work plan Completed |
Evidence:
|
Remove / Disassembly of plant or equipment
|
|
Required isolations are confirmed, where appropriate, in accordance with site requirements Completed |
Evidence:
|
Removal of plant / equipment or disassembly of major components, is carried out in conjunction with others involved in, or affected by, the work in accordance with the work plan Completed |
Evidence:
|
Removal of plant / equipment or disassembly of major components, is carried out, mindful of the effect on other plant or structures, in accordance with the work plan Completed |
Evidence:
|
Unused electrical conductors are isolated and terminated in accordance with the work plan Completed |
Evidence:
|
Where applicable, unused electrical conductors / energy sources, are isolated and terminated in accordance with the work plan
|
|
Other sources of energy or material are terminated and blanked in accordance with the work plan Completed |
Evidence:
|
Re-commission the plant or equipment
|
|
Plant is de-isolated in accordance with site requirements Completed |
Evidence:
|
Pre-operational checks are carried out on plant according to manufacturer’s recommendations and site requirements Completed |
Evidence:
|
Sequence for re-commissioning procedures are strictly adhered to in accordance with the work plan Completed |
Evidence:
|
Plant is tested for correct operation in accordance with manufacturer’s and enterprise/site procedures Completed |
Evidence:
|
Plant or equipment performance is monitored using appropriate methods and test equipment in accordance with the work plan Completed |
Evidence:
|
Data is collected, interpreted and referenced against specifications and variances recorded Completed |
Evidence:
|
Plant or equipment is adjusted to specifications using appropriate techniques in accordance with the work plan Completed |
Evidence:
|
Final inspections and performance data collected to ensure compliance with manufacturers specifications Completed |
Evidence:
|
Complete the work
|
|
Work is completed and appropriate personnel are de-briefed in accordance with site/enterprise requirements Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures Completed |
Evidence:
|
Where applicable, specialist, tools and equipment are maintained and stored in accordance with site/enterprise/ manufacturers recommendations. Completed |
Evidence:
|
Work completion details, including commissioning / decommissioning report and recommendations are finalised in accordance with site/enterprise procedures Completed |
Evidence:
|