8) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the range statement of the competency standard unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitude competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the "Assessment Guidelines - UEP06 ". Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and Range Statement

Apply sustainable energy principles and practices as specified in the Performance Criteria and Range Statement

Demonstrate an understanding of the essential knowledge and associated skills as described in 6) of this unit

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated performance across a representative range of contexts from the prescribed items below:

Knowledge and application of relevant sections of: Occupational Health and Safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures

Planning for tuning procedures

Tuning processes and techniques

Testing and monitoring procedures

Work completion procedures

Dealing with an unplanned event by drawing on Essential Knowledge and Skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this competency standard unit.

Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions.

Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application of work.

In addition to the resources listed above in Context of assessment', evidence should show competency working, in limited spaces, with different types of plant and equipment as well as different structural/construction types and methods and in a variety of environments.

Method of assessment

8.4)

This unit shall be assessed by methods given in Volume 1, Part 3 Assessment Guidelines.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Skills described in this unit.

Concurrent assessment and relationship with other units

8.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied competency standard units where listed.

Nil

Key competencies

8.6)

Evidence that particular key competencies have been achieved within this unit is in the context of the following Performance Criteria of evidence. See Volume 2, Part 4 for an explanation of Key competencies and levels of this Training Package.

Key competencies

Example of Application

Performance Level

How are ideas and information communicated within this competency?

Refer to the following example of application:

2

Explain ideas and actions, make suggestions for alternative actions and deal with contingencies and non-routine situations.

How can information be collected, analysed and organised?

Refer to the following example of application:

2

Information with regard to operations, faults and maintenance may be observed and monitored for analysis and organised into records and reports.

How are activities planned and organised?

Refer to the following example of application:

2

Planning the required activity, to include co-ordination and use of equipment, materials and tools to avoid backtracking and rework.

How is team work used within this competency?

Refer to the following example of application:

2

Coordinate activities of the team and provide appropriate support to other team members in completion of work tasks to meet the team's goals.

How are mathematical ideas and techniques used?

Refer to the following example of application:

2

Calculation of time to complete routine projects, operations, tasks, estimation of distances, levels, loads and material requirements.

How are problem solving skills applied?

Refer to the following example of application:

2

Determine solutions which focus on long and short-term resolution of work task problems.

How is use of technology applied?

Refer to the following example of application:

2

Access, communicate, measure and provide information to monitor operations and performance of plant and equipment.

Skills Enabling Employment

8.7)

Evidence that competency in this unit incorporates skills enabling employment is in the context of the following performance. See Volume 2, Part 5 for definitions and an explanation of skills enabling employment.

Skills for Employment

Example of Application

1

Developing and using skills within a real workplace

Refer to the following example of application:

Completion of tasks within an acceptable timeframe and performance with some supervision.

2

Learning to learn in the workplace

Refer to the following example of application:

Comprehension and application of theoretical knowledge to well-developed skills.

3

Reflecting on the outcome and process of work task

Refer to the following example of application:

Focused on improvement in own and other team member's performance in the workplace.

4

Interacting and understanding of the context of the work task

Refer to the following example of application:

Working understanding of the processes and systems which apply to the workplace.

5

Planning and organising the meaningful work task

Refer to the following example of application:

Achieving work tasks in a timely manner and ensuring that the work team achieves its stated work goals.

6

Performing the work task in non-routine or contingent situations

Refer to the following example of application:

Seek advice and apply solutions to problems relevant to the workplace environment.

6) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired tuning process plants and equipment.

The extent of the Essential Knowledge and Associated Skills required follows:

Evidence shall show that knowledge has been acquired for safe working practices of:

Relevant Occupational Health and Safety regulations

Relevant statutory legislation

Relevant enterprise/site safety procedures

Enterprise/site emergency procedures and techniques

Plant status

Plant operating parameters

Environmental procedures

Relevant plant and equipment;

Location of relevant plant and equipment

Enterprise recording procedures

Plant processes and process dynamics

Programming and testing requirements

Plant capability limitations

Means of accessing test points

Tuning processes and techniques

Relevant plant variables that can be monitored

Field device and plant characteristics

Tuning algorithms

Control systems function and logic scaling requirements

Scheduling (planning) and testing activities

Testing and tuning techniques

Structure and design technology of power generation plant

Specific skills needed to achieve the performance criteria:

Apply relevant OHS regulations

Apply relevant statutory legislation

Apply relevant enterprise/site safety procedures

Apply enterprise/site emergency procedures and techniques

Apply enterprise recording procedures

Locate relevant plant and equipment

Operate plant within design parameters

Identify plant status

Use enterprise documentation procedures

Solve problems

Set-up and use test/tuning equipment

Coordinate testing operations

Communicate effectively

Prepare engineering programmes/ procedures/reports

Analyse test results and translate to tuning settings for optimal system response

Apply testing and tuning techniques

Apply data analysis techniques and tools.

7) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Generation plant to be tuned may include hydro plant, oil, gas or coal firing equipment; draft systems and associated systems; unit control equipment, turbine systems, steam and water systems; water treatment plant, dust collection plant; unit computer or distributive control systems.

Variables include age of plant, plant duty and varying ages of control equipment

Documentation may include; drawings, logic diagrams, function diagrams, plant records, testing procedures, plant notes, test equipment calibration certificates, manufacturer's operating and maintenance manuals; plant incident reports, specialist reports and manufacturer's recommendations.

Resources may include internal service groups, external specialists and specialised testing equipment.

Technical considerations may include control systems rate of change, plant overshoot/undershoot, plant capability/limitations, control system type and design.

Process considerations may include; pressure, level, flow, temperature, speed and vibration and mix.

Statutory requirements may include Occupational Health and Safety legislation, and environmental legislation.

Generic terms are used throughout this Training Package for vocational standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms are given in Volume 2, Part 1.