NTISthis.com

Evidence Guide: UETTDREL18A - Inspect and treat poles and inspect electrical apparatus

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UETTDREL18A - Inspect and treat poles and inspect electrical apparatus

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to Inspect and treat poles and inspect electrical apparatus.

  1. Works instructions are received, analysed and confirmed, if necessary by site inspection.
  2. Relevant requirements and established procedures for the work are communicated to all personnel and identified for all work sites
  3. OHS policies and procedures related to requirements and established procedures for the visual inspection and treatment of poles and structures, and the inspection of overhead structures and electrical apparatus used on the poles are obtained and confirmed.
  4. Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures.
  5. Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored according to established procedures.
  6. Relevant work permits are obtained, where necessary, to access and perform work according to requirements and/or established procedures.
  7. Resources including equipment, tools and personal protective equipment required for the job are obtained and confirmed in working order.
  8. Relevant person responsible for First Aid and / or related work safety procedures at the worksite are confirmed in accordance with established procedures to ensure safety measures are followed in the instance of an incident
  9. Liaison and communication issues with appropriate personnel, authorities, clients and land owners are resolved to carry out work where necessary.
  10. Site is prepared according to the work schedule and to minimise risk and damage to property, commerce, and individuals in accordance with established procedures.
  11. Personnel participating in the work are fully briefed and respective responsibilities confirmed in accordance with established procedures, where necessary.
  12. Traffic management plan is identified and road signs, barriers and warning devices are positioned in accordance with requirements, where necessary.
Works instructions are received, analysed and confirmed, if necessary by site inspection.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Relevant requirements and established procedures for the work are communicated to all personnel and identified for all work sites

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OHS policies and procedures related to requirements and established procedures for the visual inspection and treatment of poles and structures, and the inspection of overhead structures and electrical apparatus used on the poles are obtained and confirmed.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Relevant work permits are obtained, where necessary, to access and perform work according to requirements and/or established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Resources including equipment, tools and personal protective equipment required for the job are obtained and confirmed in working order.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Relevant person responsible for First Aid and / or related work safety procedures at the worksite are confirmed in accordance with established procedures to ensure safety measures are followed in the instance of an incident

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Liaison and communication issues with appropriate personnel, authorities, clients and land owners are resolved to carry out work where necessary.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Site is prepared according to the work schedule and to minimise risk and damage to property, commerce, and individuals in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Personnel participating in the work are fully briefed and respective responsibilities confirmed in accordance with established procedures, where necessary.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Traffic management plan is identified and road signs, barriers and warning devices are positioned in accordance with requirements, where necessary.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Conduct inspection and treatment of poles and inspect electrical apparatus

  1. OHS and sustainable energy and environmental principles and practices to reduce the incidents of accidents and minimise waste are monitored and followed in accordance with requirements and established procedures.
  2. Tools and equipment are selected appropriate to the task requirements and are used to produce desired outcomes.
  3. Lifting, and use of power tools/equipment, techniques and practices are safely followed in accordance with established procedures.
  4. Essential knowledge and associated skills are applied for the inspection of poles and electrical apparatus, and the safe treatment of poles and structures to ensure completion in an agreed timeframe and, to quality standards with a minimum of waste according to requirements.
  5. Hazard warnings and safety signs are recognised, hazards identified and OHS risks reported to immediate appropriate personnel for directions according to established procedures.
  6. Visual inspection of poles and overhead structures, conductors, cables and electrical apparatus used on poles and / or structures is carried out in accordance with the work schedule to requirements and establish procedures.
  7. Poles and / or structures are tested or examined from approximately eye level to below ground to requirements and established procedures.
  8. Visual checks are performed to identify fungal activity, dry rot, termite and borer infestation in accordance with established procedures, where required.
  9. Treatment of poles and/or structures is carried out, in accordance with the work schedule to requirements and established procedures.
  10. Defective or suspect poles are identified according to established procedures.
  11. Unplanned events during the inspection of poles, structures electrical apparatus are undertaken within the scope of established procedures.
  12. Known solutions to a variety of problems are applied using acquired knowledge and associated skills.
  13. On-going checks of quality of the work are undertaken in accordance with instructions and established procedures
OHS and sustainable energy and environmental principles and practices to reduce the incidents of accidents and minimise waste are monitored and followed in accordance with requirements and established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment are selected appropriate to the task requirements and are used to produce desired outcomes.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Lifting, and use of power tools/equipment, techniques and practices are safely followed in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Essential knowledge and associated skills are applied for the inspection of poles and electrical apparatus, and the safe treatment of poles and structures to ensure completion in an agreed timeframe and, to quality standards with a minimum of waste according to requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Hazard warnings and safety signs are recognised, hazards identified and OHS risks reported to immediate appropriate personnel for directions according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Visual inspection of poles and overhead structures, conductors, cables and electrical apparatus used on poles and / or structures is carried out in accordance with the work schedule to requirements and establish procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Poles and / or structures are tested or examined from approximately eye level to below ground to requirements and established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Visual checks are performed to identify fungal activity, dry rot, termite and borer infestation in accordance with established procedures, where required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Treatment of poles and/or structures is carried out, in accordance with the work schedule to requirements and established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Defective or suspect poles are identified according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unplanned events during the inspection of poles, structures electrical apparatus are undertaken within the scope of established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Known solutions to a variety of problems are applied using acquired knowledge and associated skills.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

On-going checks of quality of the work are undertaken in accordance with instructions and established procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete the Inspection and treatment of poles and inspect electrical apparatus

  1. Work undertaken is checked against works schedule for conformance with requirements, with anomalies reported in accordance with established procedures.
  2. Accidents and/or injuries are reported in accordance with requirements/established procedures, where applicable.
  3. Work site is rehabilitated, cleaned up and made safe in accordance with established procedures.
  4. Tools and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage according to established procedures.
  5. Unsafe or faulty tools are identified and marked for repair in accordance with established procedures before, during and after use.
  6. Relevant work permit(s) are signed off and poles and structures are returned to service in accordance with requirements, where applicable.
  7. Works completion records, reports and/or documentation and information are finalised and processed and appropriate personnel notified to enterprise requirements.
Work undertaken is checked against works schedule for conformance with requirements, with anomalies reported in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Accidents and/or injuries are reported in accordance with requirements/established procedures, where applicable.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work site is rehabilitated, cleaned up and made safe in accordance with established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unsafe or faulty tools are identified and marked for repair in accordance with established procedures before, during and after use.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Relevant work permit(s) are signed off and poles and structures are returned to service in accordance with requirements, where applicable.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Works completion records, reports and/or documentation and information are finalised and processed and appropriate personnel notified to enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the range statement of the competency standard unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all component parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated Performance Criteria shall be demonstrated on at least two occasions. Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range; and

Apply sustainable energy principles and practices as specified in the Performance Criteria and range; and

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and

Demonstrate an appropriate level of employability skills; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

Range of tools/equipment/materials/procedures/workplaces/other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

Inspect and test at least four of the following:

Wood

Steel

Concrete

Composite

Reinforced Poles

B

Conduct all of the following:

Drill test

Non intrusive test

C

Undertake all of the following activities:

Chemical treatment

Reinforcement(remove)

Fit a sleeve to stays/guys

D

Inspect all of the following:

Poles and structures,

Overhead conductors/cables,

Underground/overhead transition points,

Electrical equipment,

Hardware,

Earthing systems,

E

Complete inspection reports and update records for all of the following:

Poles and structures,

Overhead conductors/cables,

Underground/overhead transition points,

Electrical equipment,

Hardware,

Earthing systems,

F

Using at least two of the following:

Un-aided eye,

Binoculars,

Electronic data capture using infrared and/or digital video camera and / or computer,

Sonic tester,

Drill

G

At least one occasion

Dealing with an unplanned event by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to safely undertake actual work near live electrical apparatus

In addition to the resources listed above, in context of and specific resources for assessment, evidence should show demonstrated competency working below ground, in limited spaces, with different structural/construction types and method and in a variety of environments.

Method of Asessment

9.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 “Assessment Guidelines”.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

For optimisation of training and assessment effort, competence in this unit is not recommended to be assessed concurrently with any other unit.

Required Skills and Knowledge

8) Essential Knowledge and Associated Skills (EKAS): This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of inspecting poles and electrical apparatus.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-TEL18A Inspection of poles and of electrical apparatus

Evidence shall show an understanding of inspection of poles and of electrical apparatus to an extent indicated by the following aspects:

T1 Poles and of electrical apparatus inspection safety requirements encompassing:

Working safely with machinery and equipment near live electrical apparatus

An understanding of working safely on an around electrical equipment through the application of risk management principles and control measures.

Selecting and using appropriate personal safety equipment

Implementing emergency procedures for the rescue of an electric shock victim

Providing emergency first aid for an electric shock victim

Selecting and using Personal Protecting Equipment (PPE)

Safe handling and use of chemical treatments

Visual checking and treatment of poles and structures

Inspecting of overhead structures and electrical apparatus used on poles and / or structures

Documenting inspection findings in accordance with enterprise requirements.

T2 Inspection of poles and electrical apparatus/equipment encompassing:

Standards, codes, legislation, supply authority regulations and or enterprise requirements

Characteristics of wood used for structures within the electrical distribution system - relationship between timber and water, faults that occur that influence the integrity of the structure, effects and types of fungal activity, effects of termite and borer activity, effects of rot

Deterioration prevention techniques - relationship between steel, concrete and wood, inspection procedures for deterioration, deterioration prevention procedures in steel, concrete and wood, procedures for the repair of deterioration in steel, concrete and wood

Ground line inspection procedures of electrical distribution structures - requirements for pole inspection on electrical distribution structures, use of specific equipment and testing devices during testing/inspection, methods of recording data

Overhead line inspection procedures of electrical distribution structures - methods and requirements for overhead inspection on electrical distribution structures including cables, conductors and apparatus, clearances for overhead conductors, cables and structures, use of specific equipment and testing devices during testing/inspection, methods of recording data.

Range Statement

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section 1 of this volume and form an integral part of the Range Statement of this unit:

Visual inspection may include:

Inspection may be carried out on foot or by conventional ground-based vehicle.

Inspection techniques may include the use of un-aided eye, binoculars, electronic data capture using infrared and/or digital video camera, computers, sonic testing devices and drill testing.

Items to be inspected may include overhead poles, structures and / or electrical apparatus, but not transmission towers

Electrical apparatus may include:

Single Wire Earth Return (SWER), High Voltage (HV) and Low Voltage (LV) overhead conductors and cables, underground cables (as attached to the poles) and overhead transition points, conductor terminations, insulators, conductor ties, cross arms, cross arm mountings and brackets, switches, HV fuses and fuse carriers, pole mounted transformers, sub stations, air-break switches, surge diverters, auto reclose relays, possum guards, earth guards, angle of the pole, lights, bolts and associated pole fixings.

Work permits may include:

Safe Approach Distances Zones / Safe Working Clearance, Work Permit(s) and/or Access Authorisation Permits and those required under Technical standards and Industry Guidelines.

Tools / equipment may include:

Power operated tools such as chainsaws, brush cutters, power pruners, powered drills, augers, air compressors, generators, jack hammers, demolition saws, measuring devices, extendable mounted cameras

Excludes machinery and equipment that encompass driving and associated licenses, such as slashers, boom-operated insulated elevating work platforms, excavator, back hoes and the like.

Hand tools such as hacksaws, hammers, screwdrivers, sockets, wrenches, scrapers, chisels, files, tape measures, bolt cutters, knives and other related associated

Inspection may include:

On foot or by conventional ground-based vehicle and /or from the air. Aircraft maybe helicopter or fixed wing types.

Treatment of poles and structures may include:

The chemical treatment for the prevention of pole deterioration through the insertion of chemical preservatives (i.e. Polesaver) into the base of wooden poles