9) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the range statement of the competency standard unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all component parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

In accordance with the National Refresher Training Recognition Protocol for the Electricity Supply Industry, this unit is identified as a Refresher Training unit and is only available for use by industry to meet industry protocols and regulatory requirements.

Industry has defined Refresher Training as:

“A competency confirmation event which may include training, the purpose of which is to compensate for or prevent deterioration in a previously achieved standard of performance”

Under the protocol and the applicable State or Territory legislative and regulatory requirements, Electricity Supply Industry employees are required to maintain currency in this Unit for authorisation/approval to work on ESI Networks.

Industry accepts that opportunities to practice emergency procedures are generally restricted to simulated exercises in a controlled environment during competency confirmation programs.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated at each competency confirmation event.

In accordance with State and Territory regulations and the “Assessment Guidelines – UET09”. Evidence shall also comprise:

A performance demonstrated within the timeframes typically expected of the procedure. In particular the assessment of this unit shall confirm that a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range; and

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

Range of tools/equipment/materials/procedures/workplaces/other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

Perform, to the satisfaction of the assessor

Preparation and use of test equipment

B

Perform, to the satisfaction of the assessor

Preparation and correct use of PPE

C

Perform, to the satisfaction of the assessor

Testing of single phase and multi phase connections to network operator’s procedures

D

Perform, to the satisfaction of the assessor

Document test results to network operator’s procedures

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to organisational testing procedures, information and resources typical of the workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to safely undertake connection and test procedures in the workplace.

In addition to the resources listed above, in context of any specific resources for assessment, evidence should show demonstrated competency working in a realistic environment and a variety of conditions.

Method of assessment

9.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 “Assessment Guidelines”.

Note:

Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified essential knowledge and associated skills and their application are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

For optimisation of training and assessment effort, competence in this unit is not recommended to be assessed concurrently with any other unit.

8) Essential Knowledge and Associated Skills (EKAS): This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of AS 4741

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-TRF11A Low voltage electricity networks connections testing

Evidence shall show an understanding of low voltage electricity networks connections testing to an extent indicated by the following aspects:

T1 Low voltage testing of network connections encompassing:

Selection and inspection of test equipment relevant for the testing procedures

Acceptable neutral voltage criteria

Polarity testing

Neutral integrity testing

Phase rotation testing

Phasing confirmation

Corrective actions to network operator’s procedures

Recording and reporting results to network operator’s procedures

T2 Skills required to test low voltage network connection encompassing:

Preparation and use of test equipment

Preparation and correct use of PPE

Testing of single phase and multi phase connections to network operator’s procedures

Documenting test results to network operator’s procedures

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall be demonstrated in relation to performing test procedures described in AS 4741.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section 1 of this volume and form an integral part of the Range Statement of this unit:

Appropriate and relevant persons

Appropriate authorities

Assessing risk

Assessment

Authorisation

Emergency

Established procedures

Fall prevention

Hazards

Identifying hazards

Inspect

Legislation

Notification

OHS practices

OHS issues

Personnel

Requirements

Calibration of test equipment