NTISthis.com

Evidence Guide: UETTDRVC32A - Use specialised plant to cut vegetation above ground level near live electrical apparatus

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UETTDRVC32A - Use specialised plant to cut vegetation above ground level near live electrical apparatus

What evidence can you provide to prove your understanding of each of the following citeria?

Select and prepare specialised plant and for use near live electrical apparatus.

  1. Specialised plant is selected and prepared to job requirements and confirmed against work plan.
  2. Routine pre-operational checks of specialised plant are completed to manufacturers’ specifications and enterprise requirements.
  3. OHS hazards in the workplace are recognised, risk assessed and minimised according to enterprise requirements.
  4. The candidate is able to recognise and follow the requirements for safe working procedures and legislation during transport.
  5. The candidate has ensured procedures and risk control measures are in place and followed in the event of an incident.
  6. The candidate appropriately reported any incidents according to established procedures.
Specialised plant is selected and prepared to job requirements and confirmed against work plan.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Routine pre-operational checks of specialised plant are completed to manufacturers’ specifications and enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

OHS hazards in the workplace are recognised, risk assessed and minimised according to enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The candidate is able to recognise and follow the requirements for safe working procedures and legislation during transport.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The candidate has ensured procedures and risk control measures are in place and followed in the event of an incident.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The candidate appropriately reported any incidents according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operate Specialised Plant near live electrical apparatus.

  1. Plant is operated in a safe and controlled manner and monitored for performance and efficiency.
  2. Risks to self, others and the environment are anticipated and minimisation strategies implemented accordingly.
  3. Suitable personal protective clothing and equipment is selected, used, maintained and stored according to OHS requirements.
  4. Environmental implications associated with specialised plant operation are identified, assessed and reported according to established procedures.
  5. Non-routine events are referred to the immediate authorised personnel for directions according to established procedures.
Plant is operated in a safe and controlled manner and monitored for performance and efficiency.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Risks to self, others and the environment are anticipated and minimisation strategies implemented accordingly.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Suitable personal protective clothing and equipment is selected, used, maintained and stored according to OHS requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Environmental implications associated with specialised plant operation are identified, assessed and reported according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Non-routine events are referred to the immediate authorised personnel for directions according to established procedures.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Complete operations and report on specialised plant operation near live electrical apparatus.

  1. Shut-down procedures for specialised plant are completed to manufacturers’ specifications and enterprise requirements.
  2. Specialised plant operational records are completed and maintained according to enterprise requirements.
  3. Malfunctions, faults, irregular performance and damage to specialised plant are detailed and reported according to enterprise requirements.
  4. Specialised plant is cleaned, secured and stored according to manufacturers’ specifications, OHS and enterprise requirements.
Shut-down procedures for specialised plant are completed to manufacturers’ specifications and enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Specialised plant operational records are completed and maintained according to enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Malfunctions, faults, irregular performance and damage to specialised plant are detailed and reported according to enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Specialised plant is cleaned, secured and stored according to manufacturers’ specifications, OHS and enterprise requirements.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

9) This provides essential advice for assessment of the unit of competency and must be read in conjunction with the Performance Criteria and the Range Statement of the unit of competency and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all component parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the “Assessment Guidelines – UET12”. Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range; and

Apply sustainable energy principles and practices as specified in the Performance Criteria and range; and

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment; and,

Demonstrate an appropriate level of employability skills; and

Conduct work observing the relevant Anti Discrimination legislation, regulations, policies and workplace procedures; and

Demonstrated performance across a representative range of contexts from the prescribed items below:

Range of tools/ equipment/ materials/ procedures/ workplaces/ other variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

Confirm what range of specialised plant are covered in this standard in at least 3 of the following:

Mechanical Tree Trimmer.

Boom-operated Mower.

Boom-operated Groomer

Hedgers

*Pre and post operational checks, inspections and minor maintenance.

*Safe deployment of machinery and equipment in varying conditions and weather.

(* Must do)

B

Determine what is involved in routine pre-operational checks of specialised plant and equipment.

Pre-start and safety checks as per manufactures specifications.

Checking and confirming equipment calibration settings and operating methods

Observing and monitoring noise levels for correct operation.

Preparation of independently powered tools may include cleaning, priming, tightening, basic repairs and adjustments.

Identify and segregate unsafe or faulty equipment for repair or replacement.

C

Determine what enterprise requirements apply to this standard.

Standard Operating Procedures (SOPs),

Industry standards,

Production schedules,

Material Safety Data Sheets (MSDSs),

Work notes,

Product labels,

Manufacturers specifications,

Operators manuals,

Enterprise policies and procedures (including waste disposal,

Recycling and re-use guidelines),

OHS procedures,

Supervisors oral or written instructions,

Work and routine maintenance plans.

D

Determine from the following what OHS hazards are encountered in the workplace.

Exposure to;

loud noise,

fumes,

solar radiation,

dust,

ergonomic hazards associated with posture and vibration,

hazardous substances (fuel, oils, fertiliser),

oil and grease spills.

Presence of:

bystanders,

livestock and wildlife,

difficult terrain and varying gradients,

potholes,

ditches,

gullies,

embankments,

obstacles (rocks, logs,

fences,

debris, buildings),

extreme weather conditions, electricity,

overhead powerlines,

mechanical malfunctions and exposed moving parts, and other machinery including hydraulics.

E

Confirm how safe and controlled operation of machinery and equipment has been demonstrated.

This should include:

Appropriate selection and use of specialised plant and equipment.

Using operational techniques for the specific terrain (on and off-road environments) and weather conditions.

Maintaining working loads within specifications including ensuring hitch-points are operated at the correct height.

F

Determine what personal protective clothing and equipment is relevant to this standard.

Boots,

hat/hard hat,

overalls,

gloves,

protective eyewear,

hearing protection,

respirator or facemask, and sun protection (sun hat, sunscreen).

G

Confirm what environmental implications associated with the operation of machinery and equipment.

Such as: the use and disposal of maintenance debris and hazardous substances,

run-off flows of water and cleaning agents from servicing maintenance and cleaning activities

Soil disturbance and dust problems

H

Confirm what procedures are included in the shut-down of machinery and equipment.

As per manufacturers safe operating procedures

I

At least one occasion

Dealing with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to safely undertake actual operation and routine maintenance of specialised plant and equipment near live electrical apparatus.

In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency working below ground, in limited spaces, with different structural/construction types and method and in a variety of environments.

Method of assessment

9.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 “Assessment Guidelines”.

Note:

Competent performance with inherent safe working practices is expected in the Transmission, Distribution and Rail Traction Industry. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

For optimisation of training and assessment effort, competence in this unit may be assessed concurrently with the following units:

RTC2307A Operate machinery and equipment

Required Skills and Knowledge

8) Essential Knowledge and Associated Skills (EKAS): This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of operating vegetation control plant, and equipment near live electrical apparatus.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

KS01-TVC32A ESI vegetation control specialist plant use

Evidence shall show an understanding of using specialised plant to cut vegetation above ground level near live electrical apparatus to an extent indicated by the following aspects:

T1 Enterprise specific vegetation control specialised plant encompassing:

Types and application of specialised plant – sky trim, bushy, jarraff, hedging tractor, timber pro (harvester), etc.

Purpose and use of cutting plans relevant to the vegetation type

Cutting techniques of vegetation control specialised plant

Techniques in undertaking different branch cuts - scarf under-cut, top cut technique, top scarf - bottom-back cut technique, side scarf opposite back-cut technique, including size of cut.

Understanding of definitions of drop zone and full zone.

Pre-operational checks on vegetation control specialised plant

Electrical test requirements e.g. test and certify periodically.

Techniques in safely using vegetation control specialised plant - visual inspection of vegetation control specialised plant, methods of using equipment at heights and in confined spaces, precautions to note during use of specialised plant (proximity of other personnel, proximity of powerlines and obstacles, role of safety observer, length of power lead and possible fire danger due to sparks)

Types of personal protective equipment used in conjunction with vegetation control specialised plant - head protection, eye protection, hearing protection, hand protection, foot protection, body protection, general protection.

Basic maintenance of vegetation control specialised plant - cleaning, proper storage, basic repair and replacement and testing for compliance to manufacturer’s and OHS requirements.

Range Statement

10) This relates to the unit of competency as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit is to be demonstrated in relation to the operation and routine maintenance of specialised plant that encompasses driving/flying and associated licenses, such as Mechanical Tree Trimmer, boom-operated mowers, and the like used near live electrical apparatus.

Excludes specialised plant and equipment such as wood-chippers, chainsaws, brush cutters, slashers/tritters, power pruners, chemical control applicators and other related associated and powered vegetation control machinery and equipment used at ground level near live electrical apparatus.

Preparation of risk assessment control measures that encompass job safety assessment and includes traffic control measures and compliance with relevant State or Territory regulatory agencies/bodies, local government legislation, Industry bi-partite body – Guidelines/Codes of Practices or other related requirements for Safe use of equipment near live Electrical and Mechanical Apparatus.

Prevailing Licensing Requirements

Excludes any work that is or may be performed by other competent operatives within the defined “ordinary person zone”

Working near energised live electricity supply infrastructure assets

Includes periodical and pre-operational checks of the specialised plant for safe operation and conduct of maintenance checks and, associated documentation

Safe approach distances zones/Safe Working Clearance

Work permit(s) and/or access authorisation permits

Technical standards and Industry Guidelines

It may also include other areas such as: Feeder route plans, infrastructure constructions and excavations, rural applications, road construction, pavements and inclement weather

Ground configuration – undulations, uneven ground, soft ground, damp, etc

Plant, equipment and tools for use in electrical environments

The following constants and variables included in the Element/Performance Criteria in this unit are fully described in the Definitions Section 1 of this volume and form an integral part of the Range Statement of this unit:

Appropriate and relevant persons (see Personnel)

Appropriate authorities

Appropriate work platform

Assessing risk

Assessment

Authorisation

Documenting detail work events, record keeping and or storage of information

Drawings and specifications

Emergency

Environmental and sustainable energy procedures

Environmental legislation

Established procedures

Fall prevention

Hazards

Identifying hazards

Inspect

Legislation

MSDS

Notification

OHS practices

OHS issues

Permits and/or permits to work

Personnel

Quality assurance systems

Requirements

Work clearance systems