Install and finish plasterboard and fibre cement sheeting to arches

Formats and tools

Unit Description
Reconstruct the unit from the xml and display it as an HTML page.
Assessment Tool
an assessor resource that builds a framework for writing an assessment tool
Assessment Template
generate a spreadsheet for marking this unit in a classroom environment. Put student names in the top row and check them off as they demonstrate competenece for each of the unit's elements and performance criteria.
Assessment Matrix
a slightly different format than the assessment template. A spreadsheet with unit names, elements and performance criteria in separate columns. Put assessment names in column headings to track which performance criteria each one covers. Good for ensuring that you've covered every one of the performance criteria with your assessment instrument (all assessement tools together).
Wiki Markup
mark up the unit in a wiki markup codes, ready to copy and paste into a wiki page. The output will work in most wikis but is designed to work particularly well as a Wikiversity learning project.
Evidence Guide
create an evidence guide for workplace assessment and RPL applicants
Competency Mapping Template
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners. A template for developing assessments for a unit, which will help you to create valid, fair and reliable assessments for the unit, ready to give to trainers and students
Observation Checklist
create an observation checklist for workplace assessment and RPL applicants. This is similar to the evidence guide above, but a little shorter and friendlier on your printer. You will also need to create a seperate Assessor Marking Guide for guidelines on gathering evidence and a list of key points for each activity observed using the unit's range statement, required skills and evidence required (see the unit's html page for details)

Self Assessment Survey
A form for students to assess thier current skill levels against each of the unit's performance criteria. Cut and paste into a web document or print and distribute in hard copy.
Moodle Outcomes
Create a csv file of the unit's performance criteria to import into a moodle course as outcomes, ready to associate with each of your assignments. Here's a quick 'how to' for importing these into moodle 2.x
Registered Training Organisations
Trying to find someone to train or assess you? This link lists all the RTOs that are currently registered to deliver CPCCWC3002A, 'Install and finish plasterboard and fibre cement sheeting to arches'.
Google Links
links to google searches, with filtering in place to maximise the usefulness of the returned results
Books
Reference books for 'Install and finish plasterboard and fibre cement sheeting to arches' on fishpond.com.au. This online store has a huge range of books, pretty reasonable prices, free delivery in Australia *and* they give a small commission to ntisthis.com for every purchase, so go nuts :)


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Plan and prepare.

1.1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes.

1.2. Safety (OHS) requirements are followed in accordance with safety plans and policies.

1.3. Signage and barricade requirements are identified and implemented.

1.4. Tools and equipment selected to carry out tasks are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement.

1.5. Material quantity requirements are calculated in accordance with plans and specifications and quality requirements.

1.6. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.

1.7. Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied.

2. Prepare work area for installation processes.

2.1. Work area and substrate are prepared for application of sheeting.

2.2. Timber/steel wall framing is checked for straightness and plumb and any faults are rectified or reported.

2.3. Thermal and acoustic batt insulation for walls and ceilings are selected to manufacturer specifications (RW rating).

3. Install batt insulation.

3.1. Insulation batts are installed firmly between framing member and against lining material in accordance with manufacturer specifications.

3.2. Batts are abutted with closed joints and end of run completed with batt cut to size and fitted.

3.3. Insulation batts are installed firmly in the wall framing ensuring clearance of framing to fix plaster sheeting.

3.4. Batts are installed to ceiling framing to a tight fit ensuring full coverage between joists.

4. Fix plasterboard and fibre cement products to arches.

4.1. Materials are pre-conditioned for the in accordance with the manufacturer specifications.

4.2. Materials are measured and marked to ensure compliance with work requirements and minimal wastage.

4.3. Sheets are cut to fit specified arch locations with clearance to manufacturer specifications.

4.4. Sheets are fixed to specified arch locations with mechanical fastenings or combined adhesive/ fasteners to manufacturer specifications and relevant standards.

4.5. All work is carried out to manufacturer specifications and relevant Australian standards.

5. Joint and finish materials.

5.1. Compounds for backblocking and jointing are prepared to manufacturer specifications.

5.2. Backblocks are applied to specification.

5.3. Additional design details and features are identified.

5.4. Beading is installed to design requirements.

5.5. Jointing and finishing of plasterboard and fibre cement sheeting is completed in accordance with manufacturer specifications.

6. Clean up.

6.1. Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

6.2. Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.


Qualifications and Skillsets

CPCCWC3002A appears in the following qualifications:

  • CPC31211 - Certificate III in Wall and Ceiling Lining