### Formats and tools

- Unit Description
- Reconstruct the unit from the xml and display it as an HTML page.
- Assessment Tool
- an assessor resource that builds a framework for writing an assessment tool
- Assessment Template
- generate a spreadsheet for marking this unit in a classroom environment. Put student names in the top row and check them off as they demonstrate competenece for each of the unit's elements and performance criteria.
- Assessment Matrix
- a slightly different format than the assessment template. A spreadsheet with unit names, elements and performance criteria in separate columns. Put assessment names in column headings to track which performance criteria each one covers. Good for ensuring that you've covered every one of the performance criteria with your assessment instrument (all assessement tools together).
- Wiki Markup
- mark up the unit in a wiki markup codes, ready to copy and paste into a wiki page. The output will work in most wikis but is designed to work particularly well as a Wikiversity learning project.
- Evidence Guide
- create an evidence guide for workplace assessment and RPL applicants
- Competency Mapping Template
- Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners. A template for developing assessments for a unit, which will help you to create valid, fair and reliable assessments for the unit, ready to give to trainers and students
- Observation Checklist
- create an observation checklist for workplace assessment and RPL applicants. This is similar to the evidence guide above, but a little shorter and friendlier on your printer. You will also need to create a seperate Assessor Marking Guide for guidelines on gathering evidence and a list of key points for each activity observed using the unit's range statement, required skills and evidence required (see the unit's html page for details)

- Self Assessment Survey
- A form for students to assess thier current skill levels against each of the unit's performance criteria. Cut and paste into a web document or print and distribute in hard copy.
- Moodle Outcomes
- Create a csv file of the unit's performance criteria to import into a moodle course as outcomes, ready to associate with each of your assignments. Here's a quick 'how to' for importing these into moodle 2.x
- Registered Training Organisations
- Trying to find someone to train or assess you? This link lists all the RTOs that are currently registered to deliver MARL6007A, 'Apply advanced principles of marine mechanics'.
- Google Links
- links to google searches, with filtering in place to maximise the usefulness of the returned results
- Books
- Reference books for 'Apply advanced principles of marine mechanics' on fishpond.com.au. This online store has a huge range of books, pretty reasonable prices, free delivery in Australia *and* they give a small commission to ntisthis.com for every purchase, so go nuts :)

### Elements and Performance Criteria

1 | Apply principle of statics to determine forces in structures, connections, support systems, and trusses in two and three dimensions | 1.1 | Bow’s notation is applied to solve problems related to trusses |

1.2 | Individual loads are computed using method of sections | ||

1.3 | Forces in three-dimensional structures are calculated | ||

2 | Calculate friction torque in plate and cone clutches | 2.1 | Laws of friction are applied to develop formulae, using uniform wear, to find the torque in a plate and cone clutch |

2.2 | Laws of friction are applied to develop formulae, using uniform pressure, to find the torque in plate and cone clutches | ||

2.3 | Power to overcome friction in plate and cone clutches using uniform wear and uniform pressure formulae is computed | ||

3 | Calculate displacement, velocity and acceleration in cams, engine mechanisms and gear systems | 3.1 | Velocity and acceleration diagrams are applied to illustrate relative velocity and acceleration |

3.2 | Output of epicyclic gears is calculated by applying relative velocity and acceleration theory | ||

3.3 | Inertia loads are calculated using piston velocity and acceleration equations | ||

4 | Analyse forces and couples to balance reciprocating machinery | 4.1 | How primary force balance is obtained is graphically illustrated |

4.2 | Relationship between complete balance and dynamic balance is explained | ||

4.3 | Reciprocating piston acceleration formula is applied to differentiate between primary and secondary forces | ||

4.4 | Complete balance for a multicylinder reciprocating engine or machine is illustrated graphically using vector diagrams and computed analytically | ||

5 | Apply simple harmonic motion principles to solve problems in free and forced vibration | 5.1 | Differences in the terms amplitude, frequency and period are explained |

5.2 | Simple harmonic motion (SHM) equations are derived from the scotch yoke mechanism | ||

5.3 | Equations for displacement, velocity, acceleration and frequency in SHM are developed | ||

5.4 | Displacement, velocity, acceleration and frequency in SHM in a vibrating spring-mass system are determined | ||

5.5 | Spring constant (k) for springs in series and parallel is calculated | ||

5.6 | Forced vibration caused by an out-of-balance rotating mass is analysed to derive an expression for amplitude of forced vibration | ||

5.7 | Dangers of resonance are explained | ||

5.8 | Transmissibility factor to calculate frequency and spring rate are applied | ||

6 | Calculate hoop stresses in rotating rings and stresses in compound bars | 6.1 | How rotational stress is generated by centrifugal force is explained |

6.2 | Formula for hoop stress in a rotating ring is applied to calculate hoop stress and/or limiting speed of rotation | ||

6.3 | Stresses in compound bars subject to axial loads and/or temperature change are determined | ||

7 | Apply strain energy and resilience theory to determine stresses caused by impact or suddenly applied loads | 7.1 | Equation is derived to calculate strain energy in a deformed material |

7.2 | Stress in a material due to impact or dynamic loads is determined using energy equation | ||

7.3 | Equation to calculate stress caused by suddenly applied loads is derived | ||

8 | Calculate beam deflection | 8.1 | Macaulay’s method is applied to calculate beam deflection |

8.2 | Deflection of cantilever and simply supported beams is calculated using standard deflection formulae for different loads | ||

9 | Apply Euler's formula to find buckling load of a column | 9.1 | Effective length of a column with various end restraints is determined |

9.2 | Slenderness ratio is applied to determine the strength of columns | ||

9.3 | Relationship between slenderness ratio and buckling is explained | ||

9.4 | How buckling load for a slender column is applied (including a factor of safety) is explained | ||

10 | Calculate stresses | 10.1 | How to combine stress formula and calculate stress with combined loading is explained |

10.2 | Superposition is used to describe stress due to combined axial and bending stress | ||

10.3 | Mohr’s Circle is employed to illustrate normal and shear stress | ||

10.4 | Principal stress formulae are applied to explain how maximum combined normal and shear stress can be obtained | ||

10.5 | Principal stress equation is applied to calculate maximum combined shear and normal stress | ||

11 | Apply thick shell formulae | 11.1 | Tangential stress distribution caused by internal and external pressure is analysed |

11.2 | Lame’s theorem is applied to describe stress in thick cylinders due to internal and external pressure | ||

12 | Apply continuity equation to determine changes in fluid velocity | 12.1 | Conservation of energy theory is applied to calculate pressure, head and velocity of fluids flowing through orifices |

12.2 | Volumetric and mass flow through a venturi meter is calculated | ||

12.3 | Forces exerted by flowing fluids either free (jet) or contained are determined, including coefficients of velocity, contraction of area and discharge | ||

13 | Determine changes in fluid flows through pipe systems and centrifugal pumps | 13.1 | Difference between steady and unsteady flow is clarified |

13.2 | Viscosity of fluids is analysed and difference between dynamic and kinematic viscosity is explained | ||

13.3 | Significance of Reynolds number in fluid mechanics is explained | ||

13.4 | Importance of critical Reynolds number is explained | ||

13.5 | Flow losses in pipes and fittings are calculated | ||

13.6 | Changes of velocity of liquids in a centrifugal pump are analysed and entry and exit vane angles are determined |