Modify_repair aircraft component single layer printed circuit boards

Formats and tools

Unit Description
Reconstruct the unit from the xml and display it as an HTML page.
Assessment Tool
an assessor resource that builds a framework for writing an assessment tool
Assessment Template
generate a spreadsheet for marking this unit in a classroom environment. Put student names in the top row and check them off as they demonstrate competenece for each of the unit's elements and performance criteria.
Assessment Matrix
a slightly different format than the assessment template. A spreadsheet with unit names, elements and performance criteria in separate columns. Put assessment names in column headings to track which performance criteria each one covers. Good for ensuring that you've covered every one of the performance criteria with your assessment instrument (all assessement tools together).
Wiki Markup
mark up the unit in a wiki markup codes, ready to copy and paste into a wiki page. The output will work in most wikis but is designed to work particularly well as a Wikiversity learning project.
Evidence Guide
create an evidence guide for workplace assessment and RPL applicants
Competency Mapping Template
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners. A template for developing assessments for a unit, which will help you to create valid, fair and reliable assessments for the unit, ready to give to trainers and students
Observation Checklist
create an observation checklist for workplace assessment and RPL applicants. This is similar to the evidence guide above, but a little shorter and friendlier on your printer. You will also need to create a seperate Assessor Marking Guide for guidelines on gathering evidence and a list of key points for each activity observed using the unit's range statement, required skills and evidence required (see the unit's html page for details)

Self Assessment Survey
A form for students to assess thier current skill levels against each of the unit's performance criteria. Cut and paste into a web document or print and distribute in hard copy.
Moodle Outcomes
Create a csv file of the unit's performance criteria to import into a moodle course as outcomes, ready to associate with each of your assignments. Here's a quick 'how to' for importing these into moodle 2.x
Registered Training Organisations
Trying to find someone to train or assess you? This link lists all the RTOs that are currently registered to deliver MEA262B, 'Modify_repair aircraft component single layer printed circuit boards'.
Google Links
links to google searches, with filtering in place to maximise the usefulness of the returned results
Books
Reference books for 'Modify_repair aircraft component single layer printed circuit boards' on fishpond.com.au. This online store has a huge range of books, pretty reasonable prices, free delivery in Australia *and* they give a small commission to ntisthis.com for every purchase, so go nuts :)


Elements and Performance Criteria

1. Inspect single layer printed circuit cards and associated components

1.1. Relevant maintenance documentation, including component defect reports where applicable, is interpreted and matched by part and serial number

1.2. Preparation of work area and circuit card assemblies is appropriate to allow for effective detailed inspection of all substrate, circuit tracks, edge connectors and attached components, taking into account any static discharge procedures

1.3. Circuit card assemblies are visually or physically inspected for physical integrity of substrate, circuit tracks, edge connectors and attached components

1.4. Modification status is established to assist in determining repair requirements

1.5. Defects are correctly identified and reported

2. Test single layer printed circuit cards and associated components

2.1. Circuit card assemblies are correctly prepared and connected to the appropriate test facility in accordance with approved procedures, or circuit card assemblies are correctly prepared and connected in situ to allow required test procedures to be performed

2.2. Circuit card assemblies are functionally tested in accordance with normal trade practice and approved maintenance documentation for evidence of serviceability or malfunction

2.3. Circuit card assemblies, attached hardware and electronic components are electronically and/or physically adjusted/aligned in accordance with maintenance manuals or other prescribed procedures

3. Troubleshoot single layer printed circuit cards and associated components

3.1. Maintenance documentation, physical inspection and test results are used, where applicable, to assist in fault determination

3.2. Maintenance manual fault diagnosis guides, logical processes and test equipment are used appropriately to ensure efficient and accurate troubleshooting

3.3. Component faults are located and the causes of the faults are clearly identified and recorded in maintenance documentation, where required

3.4. Rectification requirements are determined

4. Dismantle single layer printed circuit cards and associated components

4.1. Conformal/protective coatings are removed from the circuit card assembly to the extent required to effect necessary repairs and in accordance with maintenance manuals, industry or enterprise standards as applicable

4.2. Appropriate OHS precautions are observed at all times during maintenance procedure

4.3. Circuit card assembly is dismantled to the extent necessary to allow repair of all identified faults

4.4. Parts for processing are correctly tagged and despatched

4.5. Parts for retention and re-fitment are correctly packaged and stored in accordance with approved procedures to avoid physical and electrostatic damage

4.6. Parts for disposal are correctly packaged and processed to accord with statutory requirements pertaining to dangerous goods

5. Assemble single layer printed circuit cards and associated components

5.1. Parts removed for access, and replacement parts, are collected ensuring appropriate modification status, component tolerances and assembly configuration is maintained

5.2. Printed circuit card and associated components are assembled in accordance with maintenance manuals, and all electrical joints meet the approved standard of the equipment manufacturer, or industry standard, as appropriate

5.3.Circuit substrate material, circuit tracks, edge connectors and through-hole eyelets are reworked, as necessary, to restore printed circuit card to a serviceable condition

5.4. Any conformal/protective coatings removed are replaced to the approved standard of the equipment manufacturer, or industry standard, as appropriate

5.5.Rework techniques are in accordance with industry approval procedures and relevant OHS requirements are observed


Qualifications and Skillsets

MEA262B appears in the following qualifications:

  • MEA41210 - Certificate IV in Aeroskills (Armament)
  • MEA50310 - Diploma of Aviation Maintenance Management (Avionics)
  • MEA40610 - Certificate IV in Aeroskills (Avionics)
  • MEA41211 - Certificate IV in Aeroskills (Armament)
  • MEA40611 - Certificate IV in Aeroskills (Avionics)

And the skillsets: