Install and maintain telecommunication cabling for services in lifts

Formats and tools

Unit Description
Reconstruct the unit from the xml and display it as an HTML page.
Assessment Tool
an assessor resource that builds a framework for writing an assessment tool
Assessment Template
generate a spreadsheet for marking this unit in a classroom environment. Put student names in the top row and check them off as they demonstrate competenece for each of the unit's elements and performance criteria.
Assessment Matrix
a slightly different format than the assessment template. A spreadsheet with unit names, elements and performance criteria in separate columns. Put assessment names in column headings to track which performance criteria each one covers. Good for ensuring that you've covered every one of the performance criteria with your assessment instrument (all assessement tools together).
Wiki Markup
mark up the unit in a wiki markup codes, ready to copy and paste into a wiki page. The output will work in most wikis but is designed to work particularly well as a Wikiversity learning project.
Evidence Guide
create an evidence guide for workplace assessment and RPL applicants
Competency Mapping Template
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners. A template for developing assessments for a unit, which will help you to create valid, fair and reliable assessments for the unit, ready to give to trainers and students
Observation Checklist
create an observation checklist for workplace assessment and RPL applicants. This is similar to the evidence guide above, but a little shorter and friendlier on your printer. You will also need to create a seperate Assessor Marking Guide for guidelines on gathering evidence and a list of key points for each activity observed using the unit's range statement, required skills and evidence required (see the unit's html page for details)

Self Assessment Survey
A form for students to assess thier current skill levels against each of the unit's performance criteria. Cut and paste into a web document or print and distribute in hard copy.
Moodle Outcomes
Create a csv file of the unit's performance criteria to import into a moodle course as outcomes, ready to associate with each of your assignments. Here's a quick 'how to' for importing these into moodle 2.x
Registered Training Organisations
Trying to find someone to train or assess you? This link lists all the RTOs that are currently registered to deliver UEENEEF103A, 'Install and maintain telecommunication cabling for services in lifts'.
Google Links
links to google searches, with filtering in place to maximise the usefulness of the returned results
Books
Reference books for 'Install and maintain telecommunication cabling for services in lifts' on fishpond.com.au. This online store has a huge range of books, pretty reasonable prices, free delivery in Australia *and* they give a small commission to ntisthis.com for every purchase, so go nuts :)


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1

Prepare to install and maintain cabling in lifts

1.1

OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.

1.2

Health and safety risks are identified and established risk control measures and procedures are followed in preparation for the work.

1.3

Remote power feeding is identified and established risk control measures prepared.

1.4

The nature and location of the work is determined from documentation or in discussion with appropriate person(s) to establish the scope of work to be undertaken.

1.5

Cable routes are planned within the constraints of the building structure, significants and regulations.

1.6

Earthing requirements are determined with consideration of existing earthing arrangements, where applicable and of cable system earth upper and lower resistance limitations.

1.7

Advice is sought from appropriate persons to ensure the work is coordinated effectively with others.

1.8

Sources of materials that may be required for the work are established in accordance with established routines and procedures.

1.9

Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.

2

Install and maintain cabling in lifts.

2.1

Established OHS risk control measures and procedures for carrying out the work are followed.

2.2

Installed support structure is checked to ensure cable will not be exposed to damage during installation and general operation.

2.3

Catenary supports are secured to building structure and tensioned where necessary to ensure cable weight can be carried in operating conditions with interference and safety segregation maintained including adherence to AS/ACIF S009.

2.4

Protective earthing of metal work is installed in accordance with requirements and to industry standards.

2.5

Cables/wires are handled in accordance with manufacturer application specifications including tension and bending stress requirements.

2.6

Control cubicles, travelling cable supports, junction boxes, line isolator units, back-mount and outlet layout conforms to manufacturer specifications and allows adequate work space for ease of access and avoid overlaying and segregation incoming and outgoing cables.

2.7

Sufficient excess is allowed at cable ends to facilitate termination.

2.8

Telecommunication outlet ends of cable are uniquely labelled to match identifier at originating location.

2.9

Cable is placed and secured to maintain safety and interference segregation in accordance with legislative and industry standards.

2.10

Cable ties not tightened to the point of causing cable sheath damage or transmission impairment are trimmed flush to prevent risk of personal damage.

2.11

Cables installed as catenaries or supported by catenaries in external environment shall meet minimum above ground clearances and clearances from hazardous electrical services as per AS/ACIF S009.

2.12

Travelling cables installed and secured to maintain safety and in accordance to relevant legislative, industry and manufacturer’s standards.

2.13

Local Isolation Units are fitted as required by TS001 and AS/ACIF S009.

2.14

Over-voltage protection devices are fitted to all cable pairs, where required, to suppress voltage surges with the devices protectively earthed in accordance with AS/ACIF S009.

2.15

TRC/CES/Earth wire insulation is protected against damage and TRC/CES and protective earths segregated in accordance with relevant industry and legislative standards AS/ACIF S009.

2.16

Procedures for referring non-routine events to immediate supervisor for directions are followed.

2.17

Cabling is installed efficiently without waste of materials and energy or damage to apparatus, the surrounding environment or services.

2.18

Routine quality checks are carried out to ensure cabling complies with requirements.

3.

Terminate and test cables and earth wires in lifts.

3.1

Established OHS risk control measures and procedures for carrying out the work are followed.

3.2

Cable sheath removed to allow for correct termination length and without damage to underlying conductors and their insulation.

3.3

Terminating modules are installed in accordance to manufacturer specifications and cable pairs neatly and sequentially fanned for termination.

3.4

Conductors are terminated in accordance with recommended colour code sequence using appropriate termination tools in accordance with manufacturer specifications.

3.5

Cable shield (if applicable) is earthed to manufacturer specifications and relevant industry codes of practice including AS/ACIF S009.

3.6

Visual inspection is undertaken to confirm termination colour code sequence has been followed prior to end-to-end testing of wire and pair termination integrity.

3.7

Cable pairs are tested and clearly labelled to provide an accurate identification in accordance with requirements.

3.8

TRC/CES/Earth wires are terminated with connectors recommended by manufacturers in accordance with relevant industry codes of practice including AS/ACIF S009.

3.9

TRC/CES /Earth wire continuity is maintained through out and interface requirements with electrical systems are observed.

3.10

TRC/CES /Earthing installation is tested for continuity, insulation resistance and conductive resistance as per relevant industry standards including AS/ACIF S009.

3.11

Earthing system is labelled in accordance with requirements.

3.12

Compatibility of alterations with existing systems is confirmed and new work tested both in isolation and when integrated with existing systems.

3.13

Procedures for referring non-routine events to immediate supervisor for directions are followed.

3.14

Cabling is terminated efficiently without waste of materials and energy or damage to apparatus, the surrounding environment or services.

3.15

Routine quality checks are carried out and a defect rectified to ensure cabling complies with requirements.

4

Complete cabling work, records and reporting.

4.1

OHS work completion risk control measures and procedures are followed.

4.2

Work site is cleaned and made safe in accordance with established procedures.

4.3

Record sheets and plans of cable location, type and infrastructure are accurately created or updated and stored in accordance with customer requirements.

4.4

Cable pair record books are created or updated to provide an accurate record of pair locations, inter-connections and usage in accordance with industry codes of practice and AS/ACIF S009.

4.5

Cabling completion advice is documented and reported in accordance with requirements.