Assessor Resource

AUMGTW3006
Machine parts

Assessment tool

Version 1.0
Issue Date: September 2021


This unit applies to the automotive and related component manufacturing environment and involves application of skills and knowledge at a specialist level. These skills and knowledge are to be used within the scope of the person's job and authority.

This unit describes the application of the required skills and knowledge to use a range of equipment to machine parts.

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.


Co-Requisites

Not applicable.


Employability Skills

This unit contains Employability Skills.




Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and enterprise policies and procedures for managing personal work priorities

maintaining a working knowledge of current work systems and practices

working and communicating effectively and positively with others involved in the work

applying, within authority, the requirements of the job or work role in relation to:

achieving production goals

achieving work quality goals

responding positively to changing work requirements

contributing effectively to cost reduction initiatives

effectively applying problem solving techniques

modify activities to cater for variations in workplace context and environment

set up and use of machining equipment

machine parts to company standards

produce machined components / parts to meet the production schedule

limit the number of faulty parts to less than quality standards

produce work flow records

identify and mark faulty parts

employ company OH&S policy and procedures

apply manual handling techniques.

Context of and specific resources for assessment

assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process

assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

assessment may be applied under project related conditions (real or simulated) and require evidence of process

assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

This describes the essential skills and knowledge and their level, required for this unit.

Required skills

speak clearly and directly in order to notify appropriate personnel of completed tasks

apply teamwork to a range of situations, including the calibration of measuring equipment

solve problems particularly in teams in order to meet performance indicators

show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas

access, interpret and apply information on relevant organisation policies, procedures and instructions, particularly to ensure tools and machines are maintained to required standards

manage time when planning, preparing and organising work priorities

take responsibility for organising own work priorities.

Required knowledge

relevant Occupational Health and Safety and Environmental regulations and enterprise policies and procedures needed to carry out work in a manner which ensures the safety of people, equipment and the environment. The specific regulations will vary according to the area of operation

organisation technical work documentation covering procedures, specifications, schedules and work plans or equivalent

organisation quality system documentation covering instructions, procedures, performance indicators and review processes or equivalent

organisation cost minimisation/waste avoidance policies, procedures and practices

environmental protection requirements relating to the disposal of waste material

procedures for the safe and efficient set up and use of machining equipment

read and interpret work orders

organisation procedures for dealing with faulty parts

organisation quality standards

manual handling processes.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.

Legislative requirements may include:

Applicable legislation, regulations and codes of practice, including those related to:

anti-discrimination

award and enterprise agreements

confidentiality and privacy

duty of care

employee relations

environment protection

equal opportunity

industrial relations

relevant industry codes of practice.

OHS requirements may include:

Legislation and regulations, organisational safety policies and procedures and may include: the use of personal protective equipment and clothing, rescue services, fire fighting organisation and equipment, first aid equipment, hazard and risk control and elimination, systems covering the use of hazardous materials and substances and manual handling procedures including lifting and carrying.

Resources may include:

machines used include drills, lathes, millers, reamers, honers, threading, grinders, broaching, CNC robot controlled

micrometers, vernier gauges, calipers, feeler gauges.

Calibration:

refers to the tolerance accuracy of measurement. This is the degree of accuracy that the measuring equipment can achieve and when it was last checked against a recognised standard of accuracy. Users may maintain an internal standard of measure against which they periodically check the measuring equipment.

Work quality goals may include:

those established within a quality system and may include identification, minimisation and elimination of defects, product/component specifications, tolerances, inspection systems, packaging specifications and non-conforming parts or products.

Appropriatepersonnel may include:

clients and managers

supervisors

suppliers

team leaders

team members.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work to be carried out is clarified and legislative and OHS requirements identified 
Resources list is correctly read and interpreted 
Appropriate hand/air tools are selected 
Machine controls and cutting tools/wheels are preset or adjusted to job specification 
Tools and machines are maintained in accordance with organisation policy 
Measuring equipment is calibrated to ensure accurate measurement within the tolerances specified 
Machine speed and feed controls are adjusted to the type of metal/alloy being machined 
Parts are machined to specification using the appropriate machining process 
Parts are machined and checked for tolerances specified in the standard operating procedures and to minimise waste 
Identified faults and defects are rectified in accordance with work quality goals 
Machined parts are washed, inspected and dried to ensure they are cleaned and contain no waste in cavities or chambers 
Production schedule is maintained and recorded in accordance with organisation procedures 
Appropriate personnel are notified of the completion of tasks 

Forms

Assessment Cover Sheet

AUMGTW3006 - Machine parts
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

AUMGTW3006 - Machine parts

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: