Assessor Resource

Carry out WHS requirements

Assessment tool

Version 1.0
Issue Date: May 2020

This unit of competency supports safe work practices for the plumbing and services industry.

Site location for work application may be either domestic or commercial and may be a new work site or an existing structure or fitting being renovated, extended, restored or maintained. It could also be conducted in an on or off-site workshop or at a customer's premises.

The unit does not cover the removal of asbestos, which is a licensed activity.

This unit of competency specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in a plumbing and services work environment.

The unit requires the performance of work in a safe manner through awareness of risks, work requirements and the planning and performance of safe work practices with concern for personal safety and the safety of others.

It includes the initial response to workplace emergencies; the safe use of electricity; the identification of hazardous materials, including asbestos; and compliance with legislated work safety practices.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)



Employability Skills

This unit contains employability skills.

Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment providing that simulated or project-based assessment techniques fully replicate plumbing and services workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

locate, interpret and apply relevant information, standards and specifications for applying safe work practices in the workplace

apply safety requirements throughout the performance of work sequences, including electrical requirements and personal protective clothing and equipment

apply sustainability principles and concepts

undertake site and workplace induction

correctly identify the location of ACM

understand and apply policies and procedures for reporting presence of ACM to designated personnel

assess workplace risks and interpret and apply safe work practices

understand workplace requirements for emergency response, including evacuation procedures

correctly locate and identify workplace firefighting and other safety equipment and appliances

correctly select and use appropriate processes, tools and equipment

safely complete all work to specification

comply with regulations, standards and workplace instructions, procedures and processes, including reporting and documentation

communicate and work effectively and safely with others.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the minimum task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe work practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry-related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Required skills

communication skills to:

complete written reports and other relevant documentation

enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

initiative and enterprise skills to:

evaluate safety issues in the workplace and determine appropriate action

recognise WHS hazards, including asbestos, and take all opportunities to alleviate safety problems in a variety of construction work sites and environments

initiative and enterprise skills to identify and report to appropriate personnel any faults in tools or materials

literacy skills to read and interpret:

documentation from a variety of sources


work safety procedures and instructions

self-management skills to deal calmly and effectively with any potential safety problems and work closely with other team members and supervisors to ensure safe working conditions are maintained

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technology skills to:

access and understand site-specific instructions in a variety of media

use mobile communication technology

Required knowledge

asbestos management code relating to prevention of exposure

job safety analysis (JSA) and safe work method statements (SWMS)

manual handling techniques


relevant legislation, regulations and workplace requirements relating to WHS, including hazard reduction and personal safety

requirements for working in confined spaces and at height, including on rooves

tools and equipment prohibited from being used near identified ACM

risk assessment

safe work practices in normal working environment

types, possible location and risks of ACM, including serpentine and amphobile groups and their use in common building materials

workplace and equipment safety requirements

workplace hazards and their precautions and reduction

workplace response to emergencies

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Workplace induction may include:

first aid officers and kits

personnel competent and/or licensed in the safe handling of asbestos

site induction work site locations

specific site WHS issues

specific site requirements.

Safe work practices are to be according to state and territory legislation and regulations and may include:

handling of materials

hazard control procedures and procedures for handling hazardous materials and substances

PPE prescribed under legislation, regulations and workplace policies and practices

use of firefighting equipment

use of first aid equipment

use of tools and equipment

workplace environment and safety.

Statutory and regulatory authorities include:

commonwealth, state or territory, and local authorities administering applicable Acts, regulations and codes of practice.

Identifying and reporting asbestos-containing materials:

includes recognising common types of ACM that may be found in construction materials and buildings

covers asbestos rope/fabrics, asbestos cement sheeting, asbestos cement piping and lagging on pipes, bituminous waterproof membrane, millboard, asbestos flues, sheeting under ceramic or vinyl floor or wall tiles in wet areas

involves reporting ACM to person in control of the workplace as set out in the relevant Asbestos Management Code.

Sustainability principles and concepts:

cover the social, economic and environmental use of resources to meet current and future needs

may include:

selecting appropriate components and material

choosing efficient products

using material efficiently

storing and disposing of hazardous material to ensure minimal environmental impact.

Safety hazards may include:

hazards and risks associated with tools and equipment

inflammable materials and fire hazards

lifting practices

lighting, gases, electricity and water

spillage, waste and debris

toxic and hazardous substances

working at heights

working in confined spaces.

Emergencies may include:




sudden illness.

Emergency response may include:

common site signs

equipment tags

facility or location signs

safety barricades and warning signs

site direction

traffic signs

workplace evacuation involving staff and customers.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace induction is received. 
Location of emergency equipment is identified. 
Current workplace emergency and evacuation procedures are identified. 
Identify safe working conditions with employer. 
Identify employee and employer rights and responsibilities regarding safe working conditions. 


Assessment Cover Sheet

CPCPCM2043A - Carry out WHS requirements
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student









Assessor name:



Assessment Record Sheet

CPCPCM2043A - Carry out WHS requirements

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:









Overall assessment result: Competent Not yet competent

Assessor name:



Student signature: