Dock material to length

This unit describes the outcomes required to prepare and dock material to length with a power driven saw. The unit includes operator maintenanceGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPICOT2229A Dock material to length


The unit involves docking material to length in a forest products factory setting

The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority


Not Applicable

Elements and Performance Criteria



1. Prepare for cutting

1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to docking material to length are identified and followed

1.2. Work order is reviewed and clarified with appropriate personnel

1.3. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer recommendations

1.4. Cutting list is reviewed in line with work order and site procedures

1.5. Material cutting patterns and saw setup sequences are planned in line with site procedures

1.6. Communication with others is established and maintained in line with OHS requirements

2. Cut material to length

2.1. Material is marked and stops are set in preparation for cutting

2.2. Cutting sequence and patterns are followed to produce required quantity

2.3. Cuts are checked for length within a set tolerance

2.4. Material with features, incorrect cuts and off-cuts are disposed of in line with site procedures

2.5. Processing and equipment faults are reported to appropriate personnel

2.6. Material is safely stacked in a designated location in line with work order requirements

3. Conduct operator maintenance

3.1. Equipment lock-out procedures are followed in line with OHS legislation and site procedures

3.2. Saw blades are checked for blunt or damaged condition in line with site procedures

3.3. Blunt or damaged saws are identified and dealt with in line with site procedures, manufacturer recommendations and environmental requirements

3.4. Saw area is kept clear of dust, off-cuts and debris in line with OHS and environmental requirements

Required Skills

This describes the essential skills and knowledge and their level required for this unit.

Required skills

Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely cut material to length and angle

Communication skills sufficient to use appropriate communication and interpersonal techniques with colleagues and others; locate and report information

Literacy skills sufficient to follow legislation, regulations, standards, codes of practice and established safe practices and procedures for cutting timber to length and angle

Numeracy skills sufficient to measure, estimate and calculate time required to complete a task

Problem solving skills sufficient to review and identify work requirements; identify problems and equipment faults; demonstrate appropriate response procedures; identify blunt or damaged saw

Required knowledge

Applicable commonwealth, state or territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for docking material to length

Environmental protection requirements, including the safe disposal of waste material (including preservative treated timber), the minimisation of carbon emissions, and the cleaning of plant, tools and equipment

Organisational and site standards, requirements, policies and procedures for docking material to length

Environmental risks and hazards

Criteria for recycling and re-using material with features, incorrect cuts and off-cuts

Characteristics of timber and timber features

Cutting patterns and sequences

Optimal docking practices

Methods for assessing condition of saw blades

Industry standard cross sections and lengths

Storage systems and labelling procedures

Established communication channels and protocols

Problem identification and resolution strategies, and common fault finding techniques

Types of tools and equipment, and procedures for their safe use and maintenance

Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks

Procedures for recording and reporting workplace information

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently dock materials to length according to organisational requirements

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:

following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to docking material to length

following organisational policies and procedures relevant to docking material to length

cutting material to length in line with the work order and within prescribed organisational tolerances

conducting operator maintenance on a docking saw

stacking batches of cut material in line with organisational requirements and OHS regulations

Context of and specific resources for assessment

Competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to follow relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to undertaking work applicable to this unit

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge

Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills

Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The assessment environment should not disadvantage the candidate

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English

Where the participant has a disability, reasonable adjustment may be applied during assessment

Language and literacy demands of the assessment task should not be higher than those of the work role

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements:

are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

fire fighting equipment

hazard and risk control

fatigue management

elimination of hazardous materials and substances

safe forest practices, including required actions relating to forest fire

manual handling including shifting, lifting and carrying

Environmental requirements may include:


organisational policies and procedures

workplace practices

Legislative requirements:

are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy


the environment

equal opportunity


relevant industry codes of practice

duty of care

Organisational requirements may include:


organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS, emergency and evacuation procedures

ethical standards

recording and reporting requirements

equipment use, maintenance and storage requirements

environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)

Material may include:

native timber species

imported timber species

dressed timber

in-the-rough timber

stress and non-stress graded timber

preservative treated timber

medium density fibreboard

laminated veneer


fibreboard and other manufactured board products

coated and/or treated timber products

beams, including laminated beams

Work order is to include:

instructions for the cutting and despatch of timber and timber products from the work site

and may include:







instructions for the environmental monitoring of work and procedures

environmental care requirements relevant to the work

Appropriate personnel may include:






Equipment is to include:

procedures for saw lock-out, such as protecting operators and co-workers from accidental injury by isolating the machine from the power source

and may include:

measuring equipment

power-operated, manually-controlled docking and trimming saws, where the cutting angle is controlled relative to the board guides and clamps

saws with adjustable angle

saws with one blade

radial arm saws

table saws

bench saws

saws with automatic feed

Cutting patterns and saw setup sequences

are to be limited to single angles requiring one cutting pass or single vertical cuts

Communication may include:

verbal and non-verbal language

constructive feedback

active listening

questioning to clarify and confirm understanding

use of positive, confident and cooperative language

use of language and concepts appropriate to individual social and cultural differences

control of tone of voice

Checking may include:

required nominal lengths in conjunction with the grading manual and appropriate Australian Standard


is a set limit for cutting over or under the required length within a set margin of acceptance usually + or - 0.5mm or in line with order or organisational requirements

Features may include:





insect defects


resin pockets

Disposing of may include:

recycling material with features, incorrect cuts and off-cuts

re-using material with features, incorrect cuts and off-cuts

redirecting material with features, incorrect cuts and off-cuts for energy recovery

Stacking may include:

preparing for transport

categorising in common size

length and angle

marking lots in line with work order and site requirements

locating so as not to block access or passage

Dealing with may include:

repairing or sending for repair blunt or damaged saws and saw blades

recycling blunt or damaged saws and saw blades that cannot be repaired

sending blunt or damaged saws and saw blades that cannot be repaired to landfill


Not Applicable

Competency Field

Common Technical

Employability Skills

This unit contains employability skills

Licensing Information

Refer to Unit Descriptor