Assessor Resource

AVIY4018B
Manage abnormal and emergency helicopter flight situations

Assessment tool

Version 1.0
Issue Date: April 2024


Work must be carried out in compliance with the relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) and/or ADF; airspace control requirements and Day Visual Flight Rules (Day VFR); and aircraft control principles, regulations, safety codes, protocols and procedures required to manage abnormal and emergency helicopter flight situations.

Use for ADF Aviation is to be in accordance with relevant Defence Orders and Instructions and applicable CASA compliance.

Operations are conducted as part of commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.

Work is performed under limited supervision.

This unit of competency is nominally packaged at Certificate IV.

Note:

Where an abnormal situation might potentially cause damage to the aircraft and/or be harmful to personnel, evidence for assessment purposes should be obtained from other than observation of performance in an actual abnormal operational situation (e.g. through using an appropriate simulator and/or structured questioning, or termination of a simulated forced landing at a point where the assessment of an outcome can be made).

This unit involves the skills and knowledge required to correctly manage abnormal situations that may occur during a helicopter flight. Abnormal situations may include a forced landing from level flight, after take-off or on approach; or an engine failure at the hover or during taxi. Abnormal situations also include a tail rotor malfunction, jammed flight control system, adverse aerodynamic conditions, or a malfunction of one of the helicopter's operating systems. Licensing, legislative, regulatory or certification requirements are applicable to this unit.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

Prerequisites

Not applicable.

Employability Skills

This unit contains employability skills.



Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and equipment, and

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through activities in an appropriately simulated environment at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders pertaining to abnormal flight situations

Relevant OH&S and environmental procedures and regulations

Basic principles of aerodynamics

Purpose and functions of helicopter systems

Functions and effects of all helicopter controls

Aerodynamic factors affecting helicopter flight performance

Low level weather and topography effects

Emergency procedures

All applicable checklist items

Practical action plans for use in the event of an engine failure

Procedures for the use of performance charts

Application of the height/velocity diagram/graph

Local air traffic control procedures and instructions

Emergency radio procedures

Actions to be conducted following a forced landing

Hazards and risks when managing a helicopter in abnormal and emergency flight situations and precautions for controlling the risks

Problems that may occur when managing a helicopter in abnormal and emergency flight situations and appropriate action that should be taken in each case

Required skills:

Apply the knowledge to the management of a helicopter in abnormal and emergency situations

Select and use relevant equipment for the management of a helicopter in abnormal and emergency situations

Read and interpret instructions, procedures and information relevant to the management of a helicopter in abnormal and emergency situations

Use instruments to monitor helicopter performance

Interpret/use a helicopter manufacturers height/velocity diagram/graph

Solve problems associated with the management of a helicopter in abnormal and emergency situations

Communicate effectively with others when managing abnormal and emergency helicopter flight situations

Read and interpret instructions, regulations, procedures and other information relevant to abnormal and emergency helicopter flight situations

Interpret and follow operational instructions and prioritise work

Complete documentation related to abnormal and emergency helicopter flight situations

Operate electronic communication equipment to required protocol

Work collaboratively with others when managing abnormal and emergency helicopter flight situations

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems that may occur when managing abnormal and emergency helicopter flight situations in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unexpected events that may arise when managing abnormal and emergency helicopter flight situations

Apply precautions and required action to minimise, control or eliminate hazards that may exist during abnormal and emergency helicopter flight situations

Monitor and anticipate operational problems and hazards and take appropriate action

Monitor work activities in terms of planned schedule

Modify activities dependent on differing workplace contingencies, situations and environments

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Adapt to differences in equipment and operating environment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and OH&S standards

Implement OH&S procedures and relevant regulations

Identify and correctly use equipment required to manage abnormal and emergency helicopter flight situations

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Tasks may be undertaken in:

variable weather conditions in accordance with Day Visual Flight Rules

Performance may be demonstrated in:

single engine helicopter

multi engine helicopter

single main rotor helicopter

multi main rotor helicopter

variable air traffic conditions

variable flight situations

abnormal situations

Performance may be demonstrated on an helicopter with:

fully functioning dual controls

an electronic intercom system

dual control brakes

wheeled or skidded undercarriage

Crew may include:

single pilot

multi crew

Limitations may be imposed by:

local noise abatement requirements and curfews

Classes of airspace are:

those designated by the Civil Aviation Safety Authority

Landing areas may include:

sealed

gravel

grass

confined area

sloping ground

sand

Abnormal conditions may include:

a forced landing from level flight, after take-off or on approach

an engine failure at the hover or during taxi

a tail rotor malfunction

a jammed flight control system

adverse aerodynamic conditions

a malfunction of one of the helicopter's operating systems

Adverse aerodynamic conditions affecting the helicopter may include:

vortex ring state

overpitching

retreating blade stall

loss of tail rotor effectiveness

ground resonance

mast bumping

dynamic roll over

Systems malfunctions may include:

fuel

electrical

helicopter airframe

flight instrument

flight control

engine

radio/navigation aid

fire

smoke and fumes

hydro mechanical systems

Operational hazards during abnormal and emergency helicopter flight situations may include:

variable surface conditions

other aircraft

loose objects

personnel

animals

birds

propeller/tail rotor/rotor wash and jet blast

Guidance during abnormal and emergency helicopter flight situations may be provided by:

air traffic control instructions

light signals

aerodrome markings

Checklists may include:

pre-flight

pre-start

engine start

pre-taxi

take-off

after take-off

approach and landing

shutdown

post-flight

Dependent on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

standard operating procedures

Procedures maintaining compliance with airspace requirements are:

geographical limits of the flight area is demonstrated on a chart

prominent geographical features are identified using a chart

the limits of the flight area are identified on the ground

the position of controlled airspace is determined using a chart and geographical features

restricted areas are identified using a chart and geographical features

departure from the circuit area and transition to the flight area is completed without incident

departure from the flight area and transition to the circuit area is completed without incident

Information/documents may include:

relevant sections of Civil Aviation Safety Regulations and Civil Aviation Orders including Day Visual Flight Rules (Day VFR)

in Defence context, relevant Defence Orders and Instructions

Flight Manual/Pilot's Operating Handbook (POH)

Manual of Standards - Pilot Licensing (MOS-PL)

Aeronautical Information Publication (AIP)

En Route Supplement Australia (ERSA)

charts

operations manuals

approved checklists

workplace procedures and instructions and job specification

induction and training materials

conditions of service, legislation and industrial agreements including workplace agreements and awards

Applicable regulations and legislation may include:

relevant Civil Aviation Safety Regulations and Civil Aviation Orders

in Defence context, relevant Defence Orders and Instructions

relevant state/territory OH&S legislation

relevant state/territory environmental protection legislation

relevant Australian Standards

Performance includes tolerances specified in either of:

relevant licence and aircraft rating requirements of the Civil Aviation Safety Authority (CASA) such as:

Day VFR Syllabus

Manual of Standards

relevant Defence documentation such as:

Defence Orders and Instructions

approved curricula and training documentation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Emergency situation requiring a forced landing is correctly identified 
Autorotative flight is entered and established at nominated speed and heading in balanced flight 
Immediate actions are performed in accordance with Flight Manual/Pilot's Operating Handbook (POH) 
A landing area within autorotative distance is selected and an appropriate action plan is formulated to ensure safety of helicopter 
Priorities are allocated to all actions to ensure the safety of helicopter and its passengers 
Emergency procedures are performed in accordance with Flight Manual/POH and established action plan 
Emergency radio transmissions are executed in accordance with workplace procedures, Flight Manual/POH and regulatory requirements 
Helicopter is landed into wind with as slow as practical ground speed while maintaining control of helicopter 
Hover and taxi surfaces are suitably selected to maximise options in the event of an engine failure 
Emergency situation involving an engine failure is correctly identified 
Immediate actions are performed in accordance with Flight Manual/POH 
A landing area within autorotative distance is selected and an appropriate pre-determined action plan is implemented to ensure safety of helicopter 
Actions comply with established procedures 
Priorities are allocated to all actions to ensure safety of helicopter 
Emergency procedures are performed in accordance with Flight Manual/POH and established action plan 
Air Traffic Service and other traffic are advised of intentions 
Helicopter is operated outside the height/velocity diagram avoid area 
Situation awareness is maintained at all times during helicopter manoeuvres 
Hover heights and surfaces are selected to maximise options in the event of tail rotor malfunction 
A tail rotor malfunction is correctly identified in accordance with workplace procedures and manufacturers instructions 
In the event of a tail rotor malfunction, immediate actions are performed in accordance with Flight Manual/POH 
In a tail rotor emergency during the hover or taxi, the helicopter is landed in accordance with Flight Manual/POH, workplace procedures and regulatory requirements 
In a tail rotor emergency during flight, control of the helicopter is established and a suitable landing area is selected 
All emergency checks are performed in accordance with the Flight Manual/POH and a plan is formulated to achieve an approach and landing 
Emergency radio messages of intentions are transmitted 
A controlled emergency landing with a malfunctioning tail rotor is performed in accordance with Flight Manual/POH, workplace procedures and regulatory requirements 
The jammed flight control malfunction is correctly identified in accordance with workplace procedures and manufacturers instructions 
Control of helicopter is maintained 
All emergency checks are performed in accordance with the Flight Manual/POH 
An appropriate plan is formulated to achieve an approach and landing 
Emergency radiotelephone procedures are correctly followed 
A controlled landing with a jammed flight control is in accordance with Flight Manual/POH, workplace procedures and regulatory requirements 
Situation awareness is maintained at all times during helicopter manoeuvres 
Adverse aerodynamic conditions affecting the helicopter are correctly identified 
Control of the helicopter is regained in accordance with Flight Manual/POH, workplace procedures and manufacturers instructions 
Lookout is maintained using a systematic scan technique at a rate determined by traffic density, visibility or terrain 
Situation awareness is maintained at all times during helicopter manoeuvres 
Abnormal situations involving a helicopter systems malfunction are correctly identified 
Appropriate emergency procedures are conducted in accordance with Flight Manual/POH and published procedures while maintaining control of the helicopter 
Approved Flight Manual/POH and published procedures are consistently applied when managing systems malfunctions 
Situation awareness is maintained at all times during a system malfunction 

Forms

Assessment Cover Sheet

AVIY4018B - Manage abnormal and emergency helicopter flight situations
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AVIY4018B - Manage abnormal and emergency helicopter flight situations

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: