List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
| |
1 | Plan and prepare. | 1.1 | Job requirements are obtained, confirmed and applied to planning. |
| 1.2 | Work site is inspected, conditions and hazards are identified and reported as required, and health and safetyrequirements are confirmed with relevant personnel and applied to planning. |
| 1.3 | Type and quantity of decorative additions to be applied are confirmed, obtained, prepared, safely handled and located ready for use. |
| 1.4 | Substrate is confirmed and method for fixing decorative additions is identified. |
| 1.5 | Tools and equipmentare selected to carry out tasks according to job requirements, checked for serviceability, and faults are rectified or reported before starting work. |
| 1.6 | Position of decorative additions is set out according to specifications and confirmed with client. |
2 | Set out and cut decorative additions. | 2.1 | Lengths of decorative additions are set out and marked for locations according to job specifications. |
| 2.2 | Plan is drawn to develop a true mitre for a compound angle or for a mitre of material of different widths, and angles are calculated by dissection. |
| 2.3 | Decorative additions including curved work are cut to required size according to manufacturer specifications. |
3 | Carry out fixing processes and finishing techniques. | 3.1 | Preparation requirements for fixing of additions are carried out according to job requirements. |
| 3.2 | Decorative additions are fitted and fixed according to job requirements. |
| 3.3 | Applied additions are trimmed and finished according to job requirements. |
4 | Clean up. | 4.1 | Work area is cleared and waste material disposed of according to work site requirements. |
| 4.2 | Tools and equipment are cleaned, maintained and stored according to workplace requirements. |
A person who demonstrates competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit, and must apply and trim:
decorative panelling to a section of wall that is at least two square metres in size
frame or border to a section of a wall that is at least two square metres in size using one of the following:
extruded sections
mouldings
one mirror with a frame or border that is at least 1200 mm x 600 mm.
In doing the above work, the person must:
comply with health and safety requirements applicable to workplace operations
apply organisational quality procedures and processes in the context of applying decorative additions
select and use processes, tools and equipment to perform application tasks safely and efficiently
accurately locate and set out materials required for placement of decorative additions
adopt safe and effective handling procedures for movement and placement of materials and components
identify typical faults and problems that occur and action required to rectify them
communicate with others to ensure safe and effective workplace operations.
A person demonstrating competency in this unit must demonstrate knowledge of:
commonly used decorative and ornamental additions to shop components
fixings and fasteners relevant to affixing decorative additions
content of and terms and symbols used in drawings and specifications
contents of and terms used in job safety analyses (JSA) and safe work method statements (SWMS) for tasks
materials relevant to decorative additions and their characteristics
organisation’s quality assurance requirements relevant to decorative additions to shopfittings and components
workplace and environment safety requirements relevant to decorative additions to shopfittings and components.
Suitable assessment of performance requires:
equipment and tools:
as listed in the range of conditions
materials:
decorative additions and finishes as listed in the range of conditions
fixing materials as listed in the range of conditions
specifications:
as listed in job requirements in the range of conditions
physical conditions:
shop building and fittings requirements for applying decorative additions
relationship with client:
consultation with client is required
relationships with team members and supervisor:
work may be completed as part of a team
timeframe:
according to job requirements.
Assessor requirements
As a minimum, assessors must satisfy the assessor requirements in the Standards for Registered Training Organisations (RTOs) current at the time of assessment.