List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for software installation | 1.1 Diagnose program format and operational purpose and identify specified applications. 1.2 Check specifications for intended operating conditions. 1.3 Check program instructions for compliance with specifications. 1.4 Counter set software timers to specification. |
2. Install automatic process machine control programs | 2.1 Select appropriate program loading technique. 2.2 Connect external loading devices correctly to automatic process machine control system. 2.3 Place machine control system in correct operational mode to accept program loading. 2.4 Download program in line with manufacturer's recommended procedure. 2.5 Check during and after downloading to ensure accurate and complete data transfer. 2.6 Disconnect external program loading devices and connections from process and machine control system. |
3. Commission automatic process and machine control program | 3.1 Monitor operation of equipment using the program for accuracy and safe performance. 3.2 Measure and check outputs for compliance with specifications. 3.3 Check external inputs for compliance with specifications. 3.4 Check total operation for compliance with specifications and resolve any issues. 3.5 Identify location for storage of program master copy and store accordingly. 3.6 Record installation and commissioning process and problems and report to appropriate personnel. |
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:
install and commission computer numerically controlled (CNC) software in CNC sizing machines and/or CNC machining and processing centres
check that machine is operating safely and in line with its intended purpose and program
complete a detailed and accurate report, for each installation, on the installation and commissioning process and problems encountered.
A person competent in this unit must be able to demonstrate knowledge of:
for the CNC software:
program format and operational purpose
system functions and capabilities
methods to install
methods to commission machinery to operational specification
requirements for safe storage of program master copy
for the machine being commissioned:
operational purpose and sizing specifications
methods to monitor the operation of commissioned machines and check calibration
organisational procedures for recording and reporting on installation and commissioning processes and problems.
The following resources must be made available:
CNC sizing machines and CNC machining and processing centres
CNC software programs
machine sizing specifications
instructions for installing CNC software and commissioning machinery
template reports for installation and commissioning processes and problems
relevant personnel for the purposes of communicating information
organisational procedures for installing software and commissioning machinery
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.