List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1 Load substrate | 1.1 Substrate is checked against job specifications with any irregularities reported and, where possible, rectified 1.2 Substrate position and stencil registration are adjusted according to job specifications |
2 Apply ink to screen | 2.1 Ink is applied to screen in quantity required for screen size 2.2 Equipment is kept clean and spills are minimised 2.3 Ink is checked against job specifications |
3 Produce proof print | 3.1 Proof print is run off and checked for colour, strength, registration, adhesion, clarity, gloss level, drying or curing, artwork detail and other technical aspects according to job specifications 3.2 Adjustments are made as required 3.3 Appropriate approval to commence production is sought prior to commencement 3.4 Belt speed and energy required are set to achieve desired curing or drying properties |
4 Run job and monitor print quality | 4.1 Printing speed production is adjusted to maximise quality and output 4.2 Print quality is continuously evaluated and adjusted as required 4.3 Effects of ink alterations during run are monitored and any discrepancy is notified according to enterprise procedures 4.4 Workplace documentation is completed as required 4.5 Curing and drying are constantly monitored and adjusted according to manufacturer or supplier and job specifications |
5 Carry out routine user maintenance | 5.1 Equipment is cleaned according to enterprise procedures 5.2 Fault conditions are identified and reported according to enterprise procedures |
6 Stack production output | 6.1 Output is checked for thorough drying or curing before stacking 6.2 Job status and progress are checked against job specifications and any necessary action is taken |
7 Finish operation | 7.1 Excess ink, screens, squeegees and flood coaters are removed and cleaned according to work health and safety (WHS) requirements and manufacturer or supplier specifications 7.2 Waste materials are disposed of according to manufacturer or supplier specifications, regulatory requirements and enterprise procedures 7.3 Equipment and surrounding areas are cleaned according to manufacturer or supplier specifications and enterprise procedures |
Evidence of the ability to:
manually produce TWO different one or two colour print runs according to job specifications, enterprise procedures and work health and safety (WHS) requirements.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
To complete the unit requirements safely and effectively, the individual must:
identify health and safety issues that apply when producing a manual print
outline the procedure for setting up the frame relative to the position of the print image and base board
describe the checks to be made of the ink to determine its suitability for printing on a particular substrate
describe the checks to be made on the printed sheet when the proof print has been run off
describe the system used for drying or curing
explain how to determine whether a print is dried or cured prior to stacking
outline the maintenance requirements for equipment or machinery used to produce manual prints
explain how to clean up and dispose of waste materials used in the production of manual prints
identify required manuals, safety and other documentation and briefly outline the relevant information in each source.
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the screen printing field of work and include access to cleaning chemicals and manual screen printing machines.
Assessors must satisfy NVR/AQTF assessor requirements.