Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Develop preparation specifications and checklists
   • Job requirements are determined from competition information
   • Rules, regulations, and vehicle specifications and tolerances are analysed for competitive advantage
   • Work specifications are documented and communicated to appropriate personnel
2. Develop preparation schedule
   • Equipment and capabilities of required personnel to meet job specifications are identified and sourced
   • Constraints to schedule are analysed and optimum sequence for vehicle preparation is documented
   • Critical path is analysed and factors affecting that path are documented
   • Preparation schedule is finalised and distributed to required personnel
3. Supervise preparation
   • Team adherence to preparation schedule is monitored according to team requirements
   • Work area is monitored for appropriate layout for job requirements and for cleanliness
   • Checks of vehicle during and after installation of components are carried out to ensure accurate and complete fitting
   • Problems with work area or operation of equipment are evaluated and resolved according to safety and environmental requirements
   • Proposals for modifications or adaptation of equipment and components are evaluated and changes adapted or adopted as required according to team requirements
4. Supervise post-assembly checks
   • Vehicle is inspected, and problems are identified and addressed according to team requirements
   • Post-preparation checks and vehicle start-up by team are supervised
   • Vehicle baseline set-up by team is supervised
   • Clean-up of work area by team is supervised
   • Final inspection of work area and vehicle is carried out and documentation completed
5. Develop preparation specifications and checklists
   • Job requirements are determined from competition information
   • Rules, regulations, and vehicle specifications and tolerances are analysed for competitive advantage
   • Work specifications are documented and communicated to appropriate personnel
6. Develop preparation schedule
   • Equipment and capabilities of required personnel to meet job specifications are identified and sourced
   • Constraints to schedule are analysed and optimum sequence for vehicle preparation is documented
   • Critical path is analysed and factors affecting that path are documented
   • Preparation schedule is finalised and distributed to required personnel
7. Supervise preparation
   • Team adherence to preparation schedule is monitored according to team requirements
   • Work area is monitored for appropriate layout for job requirements and for cleanliness
   • Checks of vehicle during and after installation of components are carried out to ensure accurate and complete fitting
   • Problems with work area or operation of equipment are evaluated and resolved according to safety and environmental requirements
   • Proposals for modifications or adaptation of equipment and components are evaluated and changes adapted or adopted as required according to team requirements
8. Supervise post-assembly checks
   • Vehicle is inspected, and problems are identified and addressed according to team requirements
   • Post-preparation checks and vehicle start-up by team are supervised
   • Vehicle baseline set-up by team is supervised
   • Clean-up of work area by team is supervised
   • Final inspection of work area and vehicle is carried out and documentation completed

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Competition information must include:	team instructions and procedures controlling body rules category rules supplementary regulations.
Work specifications must include:	steps and stages of job requirements preparation checklists procedures for minimising waste material.
Constraints to schedule must include:	timing and location of upcoming event availability of equipment and components availability of required personnel.
Safety and environmental requirements must include:	work health and safety (WHS) and occupational health and safety (OHS) requirements, including: selecting and using personal protective equipment (PPE) using chemical cleaning and lubricating agents environmental requirements, including trapping, storing and disposing of chemicals and fluids released when assembling competition vehicles.

---

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

manage the assembly and preparation by a team of one motor sport competition vehicle.

---

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to preparing a competition vehicle, including:

selecting and using personal protective equipment (PPE)

using chemical cleaning and lubricating agents

environmental requirements, including procedures for trapping, storing and disposing of chemicals and fluids released when assembling competition vehicles

methods of determining competition vehicle design, quality, and material, equipment and quantities from team instructions, supplementary regulations and manufacturer specifications

procedures for analysing rules, regulations, vehicle specifications and tolerances for competitive advantage

procedures for developing preparation schedules, including:

assembly and preparation processes applicable to competition vehicle

procedures for analysing team member capability for tasks

documentation procedures for preparation schedule

procedures for determining work area layout

procedures for supervising vehicle preparation, including:

procedures for developing and monitoring assembly inspection processes

methods of evaluating and remedying problems with work area and equipment operation.

---