Elements and Performance Criteria
- Prepare for work.
- Design drawings, specifications and data are obtained.
- Safety (OHS) requirements associated with installing Type A gas appliance flues, and workplace environmental requirements, are adhered to throughout the work.
- Quality assurance requirements for company operations are identified and adhered to.
- Appropriate work notices and required documentation are completed and dispatched in accordance with statutory and regulatory authority requirements.
- Tasks are planned in conjunction with others involved in or affected by the work.
- Tools and equipment, including personal protective equipment, are selected and checked for serviceability.
- Work area is prepared to support efficient installation of Type A gas flues.
- Identify flue requirements.
- Proposed flue location, installation requirements and route are determined.
- Dimensions and load are determined from design drawing or instruction and manufacturer instructions.
- Size of flue, flue material and components are determined in accordance with relevant Australian standards, regulatory authorities' requirements and manufacturer instructions.
- Ventilation requirements are calculated in compliance with relevant Australian standards and are determined as appropriate for job specifications.
- Quantity and type of materials required are estimated from design drawing or on-site inspection and ordered in accordance with workplace requirements.
- Install and test flue.
- Flue is installed in compliance with relevant Australian standards and job specifications.
- Sustainability principles and concepts are applied throughout the installation.
- Flue is weather-proofed in accordance with manufacturer specifications and site requirements.
- Flue is tested for operation and adjusted as required in accordance with manufacturer specifications.
- Clean up.
- Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
- Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and workplace procedures.
- Information is accessed and documentation completed in accordance with workplace requirements.