Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare to conduct periodic maintenance on photo voltaic arrays
  2. Maintain RAPS systems photo voltaic arrays
  3. Complete maintenance work of photo voltaic arrays and report

Required Skills

This describes the essential skills and knowledge and their level required for this unit

Evidence must show that knowledge has been acquired of safe working practices and conducting periodic maintenance of remote area power supply RAPS photo voltaic arrays sets

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies

KSEKA

RAPS systems photovoltaic array maintenance techniques

Evidence shall show an understanding of maintaining remote area power supply RAPS photovoltaic arrays to an extent indicated by the following aspects

T RAPS systems photovoltaic array maintenance techniques encompassing

Cleaning of photo voltaic modules

Checking for damage or delamination

Checking of module connections connecting cable and integrity of the array structure

Maintaining log books and maintenance regime

Evidence Required

This provides essential advice for assessment of the unit and must be read in conjunction with the performance criteria and the range statement of the unit and the Training Package Assessment Guidelines

The Evidence Guide forms an integral part of this unit It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package

Overview of Assessment

Longitudinal competency development approaches to assessment such as Profiling require data to be reliably gathered in a form that can be consistently interpreted over time This approach is best utilised in Apprenticeship programs and reduces assessment intervention It is the industrypreferred model for apprenticeships However where summative or final assessment is used it is to include the application of the competency in the normal work environment or at a minimum the application of the competency in a realistically simulated work environment In some circumstances assessment in part or full can occur outside the workplace However it must be in accordance with industry and regulatory policy

Methods chosen for a particular assessment will be influenced by various factors These include the extent of the assessment the most effective locations for the assessment activities to take place access to physical resources additional safety measures that may be required and the critical nature of the competencies being assessed

The critical safety issues inherent in working with electricity electrical equipment gas or any other hazardous substancematerial present a challenge for those determining competence Sources of evidence need to be rich in nature to minimise error in judgment

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its richness Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package

Critical aspects of evidence required to demonstrate competency in this unit

Before the critical aspects of evidence are considered all prerequisites must be met

Evidence for competence in this unit must be considered holistically Each element and associated performance criteria must be demonstrated on at least two occasions in accordance with the Assessment Guidelines UEE Evidence must also comprise

A representative body of work performance demonstrated within the timeframes typically expected of the discipline work function and industrial environment In particular this must incorporate evidence that shows a candidate is able to

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation regulations polices amp workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below

Conduct periodic maintenance of remote area power supply RAPS photo voltaic arrays as described in and including

A

Measuring and recording array noload and load voltages together with ambient temperature

B

Measuring and recording array output for three load conditions

C

Visually inspecting array modules and support structure for physical damage

D

Visually inspecting array connections and cables

E

Identifying array defects and faults

F

Reporting all maintenance activities

G

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items

Context of and specific resources for assessment

This unit should be assessed as it relates to normal work practice using procedures information and resources typical of a workplace This should include

OHS policy and work procedures and instructions

Suitable work environment facilities equipment and materials to undertake actual work as prescribed by this unit

These should be part of the formal learningassessment environment

Note

Where simulation is considered a suitable strategy for assessment conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy

The resources used for assessment should reflect current industry practices in relation to conducting periodic maintenance of remote area power supply RAPS photo voltaic arrays

Method of assessment

This unit shall be assessed by methods given in Volume Part Assessment Guidelines

Note

Competent performance with inherent safe working practices is expected in the Industry to which this unit applies This requires assessment in a structured environment which is intended primarily for learningassessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit

Concurrent assessment and relationship with other units

For optimisation of training and assessment effort competency development in this unit may be arranged concurrently with unit

UEENEEKA

UEENEEK103A

Conduct periodic maintenance of remote area power supply battery banks

UEENEEKA

UEENEEK104A

Conduct periodic maintenance of remote area power supply generator sets

UEENEEKA

UEENEEK106A

Conduct periodic maintenance of remote area power supply wind generators

The critical aspects of occupational health and safety covered in unit UEENEEEA and other discipline specific occupational health and safety units shall be incorporated in relation to this unit

The critical aspects of occupational health and safety covered in unit UEENEEE101A and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.


Range Statement

10) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit must be demonstrated in relation to least two different RAPS systems in which the photo voltaic array is charged from a photo voltaic array and a photo voltaic array and at least one similar RAPS system where the photo voltaic array is charged form a wind generator.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.