Application
Technical staff who work on telecommunications radio sites apply the skills and knowledge in this unit. They may make use rigging plant and equipment, fall arrest, fall guarding and fall constraint and team communications. This unit applies to standard telecommunications structures. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for work at a telecommunications site with potential EMR hazards | 1.1. Prepare for given work using safe working practices and procedures according to the occupational health and safety (OHS) Act and relevant legislation, codes, regulations and standards 1.2. Assess potential sources of radio frequency (RF) EMR allowing permissible public and occupational EMR exposure limits according to Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) 1.3. Verify methods fordetermining EMR levels and strategies for eliminating, minimising, or isolating on-site EMR hazards according to industry practice 1.4. Confirm work objectives and specifications of equipment to be installed according to design drawings, installation plans, and equipment manufacturer's specifications 1.5. Select equipment and personal protective equipment required to support the EMR hazard management plan according to company policy |
2. Plan and carry out the EMR hazard management plan against an on-site situation | 2.1. Produce EMR hazard management plan according to company policy 2.2. Consult with client to confirm EMR hazard management plan and update if required 2.3. Communicate the agreed EMR hazard management plan to all personnel on site |
3. Monitor the EMR hazard management plan | 3.1. Maintain ongoing communication to all personnel regarding amendments to the EMR hazard management plan according to company policy 3.2. Ensure that a personal radiation monitor (Radman) is worn according to manufacturer's instructions and industry practice |
Required Skills
Required skills |
communication skills to: communicate the revised EMR hazard management plan to all personnel on site liaise with other personnel use radio devices literacy skills to read and interpret: EMR hazard management plan specifications and technical documentation numeracy skills to: evaluate different types of technical data interpret results take measurements planning and organisational skills to plan, prioritise and monitor own work and OHS responsibilities problem solving and contingency management skills to adapt rigging activities and requirements to particular sites and conditions safety awareness skills to: apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities apply remote area first aid ensure that Radman is worn according to manufacturer's instructions and industry practice prevent and treat hypothermia select and use personal protective equipment for rigging projects to suit different applications and for work at heights select and use required personal protective equipment for rigging projects to suit different applications and for work at heights conforming to industry and OHS standards work systematically with required attention to detail without injury to self or others, or damage to goods or equipment task management skills to work systematically with required attention to detail and adherence to all safety requirements technical skills to: interpret and analyse documentation as sources of information relating to the site and potential EMR hazards select and use appropriate equipment and practices to suit different applications review the EMR hazard management plan and update to align with the on-site situation use equipment required to support the EMR hazard management plan |
Required knowledge |
antenna principles EMR risk assessment and mitigation strategies features and operating requirements of rigging equipment licensing and regulatory issues applying to rigging practices and systems on telecommunications radio structures remote area first aid rigging practices and systems to telecommunications radio structures specific knowledge of: EMR: associated risks methods of detecting and reporting EMR hazards potential dangers of overexposure safety practices and devices sources and types of radio frequency EMR optical fibre cabling and equipment safety practices personal protective equipment requirements of the OHS Act, relevant regulations, and applicable site and company OHS procedures working at heights safety practices |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the ability to: produce and maintain the EMR hazard management plan against an on-site situation carry out work according to the EMR hazard management plan. |
Context of, and specific resources for assessment | Assessment must ensure: site on which rigging operations may be conducted rigging and safety equipment relevant regulations, standards specifications and manuals. |
Methods of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: direct observation of the candidate working safely with EMR on a telecommunications radio structure oral or written questioning of the candidate to assess OHS requirements and work practices associated with EMR. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: ICTTCR3191A Install radio plant and equipment on telecommunications structures. Aboriginal people and other people from a non-English speaking background may have second language issues. Access must be provided to appropriate learning and assessment support when required. Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed. In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. Where applicable, physical resources should include equipment modified for people with special needs. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant legislation, codes, regulations and standards may include: | Australian Communications Industry Forum (ACIF) standards and codes Australian Communications and Media Authority (ACMA) technical standards appropriate licences that may be required: crane dogging rigging scaffolding winch Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) EMR standard AS 1353.1:1997 AS 1353.2:1997 AS 1657:1992 AS 2089:2008 AS 2319:2001 AS 2626: replaced by AS/NZS 1891.4:2000 AS 3775.1:2004 AS 3775.2:2004 AS 3777:2008 Shank hooks and large eye hooks - maximum 60 t AS 4497.2:1997 AS/NZS 1891.1:2007 AS/NZS 1891.4:2000 AS/NZS 4801:2001 AS/NZS ISO 14001:2004 guidance for use Australian building codes and regulations Australian standards CE, American National Standards Institute (ANSI) equipment standards enterprise standards environmental protection equipment certifications: NFPA 1983 (2006 edition) NFPA/UL G-rated (General Use) equipment standards: intrinsically safe lightning protection site engineering standard fire regulations heritage legislation international standards local government OHS Radcoms Act related publications Telecoms Act WI's, CI's, Business Operating Procedures (BOP), Radiocommunications Assignment and Licensing Instruction (RALI), assignment guidelines. |
Potential sources of radio frequency EMR may include: | cellular and mobile transmitter microwave radar radio. |
Methods for determining EMR levels may include: | calculations documentation EMR hazard management plan: EMR measuring devices with evidence of two required personal monitoring devices personal protection equipment methods of detecting and reporting EMR hazards reported EMR hazards signage sources and types of radio frequency EMR sources of information relating to the site and potential EMR hazards: co-location records company records site owner's documentation use of personal monitoring devices verifying and maintaining the EMR hazard management plan against an on-site situation. |
Personal protective equipment may include: | Radman safety equipment may include: aerial safety belts and lines anchor straps anchors crane cage ear muffs elevated platform equipment guards fall arrest devices and systems fall constraint systems fall guarding systems flashing lights gloves guards helmets lanyards pulleys rescue harness rigging plates rope clamps safety cages safety glasses safety harness: fall arrest sit harness scaffold deck static lines warning signs and tapes. |
EMR hazard management plan may relate to: | assessment of the status and condition of telecommunications structures: access for climbing EMR hazardous areas structural integrity control measures EMR devices site hazard identification verifying and maintaining the EMR hazard management plan against an on-site situation. |
Sectors
Unit sector | Telecommunications |
Competency Field
Telecommunications Rigging Installation |
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor